61970-456_SteadyStateHypothesis-AP-Con-Complex-NotSolvedMAS-SHACL

ssh456n:Equipment

Severity: sh:Violation

Targets:

targetClass: cim:DCSwitch
targetClass: cim:Disconnector
targetClass: cim:PowerTransformer
targetClass: cim:PowerElectronicsConnection
targetClass: cim:Equipment
targetClass: cim:PetersenCoil
targetClass: cim:PotentialTransformer
targetClass: cim:EnergyConsumer
targetClass: cim:EquivalentShunt
targetClass: cim:Cut
targetClass: cim:WaveTrap
targetClass: cim:ExternalNetworkInjection
targetClass: cim:DCShunt
targetClass: cim:DCDisconnector
targetClass: cim:Clamp
targetClass: cim:CurrentTransformer
targetClass: cim:SynchronousMachine
targetClass: cim:VsConverter
targetClass: cim:EquivalentInjection
targetClass: cim:PostLineSensor
targetClass: cim:CsConverter
targetClass: cim:ConformLoad
targetClass: cim:DCChopper
targetClass: cim:AsynchronousMachine
targetClass: cim:SurgeArrester
targetClass: cim:DCBreaker
targetClass: cim:PhotoVoltaicUnit
targetClass: cim:LoadBreakSwitch
targetClass: cim:DisconnectingCircuitBreaker
targetClass: cim:PowerElectronicsWindUnit
targetClass: cim:Breaker
targetClass: cim:GeneratingUnit
targetClass: cim:SeriesCompensator
targetClass: cim:DCGround
targetClass: cim:LinearShuntCompensator
targetClass: cim:EnergySource
targetClass: cim:NonlinearShuntCompensator
targetClass: cim:WindGeneratingUnit
targetClass: cim:NonConformLoad
targetClass: cim:ACLineSegment
targetClass: cim:FaultIndicator
targetClass: cim:StationSupply
targetClass: cim:Switch
targetClass: cim:Fuse
targetClass: cim:StaticVarCompensator
targetClass: cim:DCLineSegment
targetClass: cim:BusbarSection
targetClass: cim:Junction
targetClass: cim:Ground
targetClass: cim:EquivalentBranch
targetClass: cim:DCSeriesDevice
targetClass: cim:DCBusbar
targetClass: cim:NuclearGeneratingUnit
targetClass: cim:SolarGeneratingUnit
targetClass: cim:HydroGeneratingUnit
targetClass: cim:GroundingImpedance
targetClass: cim:GroundDisconnector
targetClass: cim:HydroPump
targetClass: cim:Jumper
targetClass: cim:BatteryUnit
targetClass: cim:ThermalGeneratingUnit

ssh456n:EquivalentInjection

Severity: sh:Violation

Targets:

targetClass: cim:EquivalentInjection

Nested Properties:

ssh456n:EquivalentInjection.p-limits

Path: cim:EquivalentInjection.p
The negated value (necessary due to sign convention) of EquivalentInjection.p shall be less than or equal to EquivalentInjection.maxP and shall be greater than or equal to EquivalentInjection.minP.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        #OPTIONAL {$this cim:EquivalentInjection.maxP ?maxp} . 
        #OPTIONAL {$this cim:EquivalentInjection.minP ?minp} .
        $this cim:EquivalentInjection.maxP ?maxp . 
        $this cim:EquivalentInjection.minP ?minp .
        #FILTER (bound(?maxp) && bound(?minp) && !(-?value<=?maxp && -?value>=?minp && ?value!=0) && !(?value<=?maxp && ?value>=?minp && ?value=0)) .  
        FILTER (!(-?value<=?maxp && -?value>=?minp && ?value!=0) && !(?value<=?maxp && ?value>=?minp && ?value=0)) .        
			}

Messages: ["Active power is outside defined active power limits."]

ssh456n:EquivalentInjection.q-limits

Path: cim:EquivalentInjection.q
The negated value (necessary due to sign convention) of EquivalentInjection.q shall be less than or equal to EquivalentInjection.maxQ and shall be greater than or equal to EquivalentInjection.minQ.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        #OPTIONAL {$this cim:EquivalentInjection.maxQ ?maxq} . 
        #OPTIONAL {$this cim:EquivalentInjection.minQ ?minq} .
        $this cim:EquivalentInjection.maxQ ?maxq . 
        $this cim:EquivalentInjection.minQ ?minq .
        #FILTER (bound(?maxq) && bound(?minq) && !(-?value<=?maxq && -?value>=?minq && ?value!=0) && !(?value<=?maxq && ?value>=?minq && ?value=0)) .  
        FILTER (!(-?value<=?maxq && -?value>=?minq && ?value!=0) && !(?value<=?maxq && ?value>=?minq && ?value=0)) .        
			}

Messages: ["Reactive power is outside defined reactive power limits."]

ssh456n:EquivalentInjection-regulation

Path: cim:EquivalentInjection.regulationCapability
If EquivalentInjection.regulationCapability in EQ is true, then EquivalentInjection.regulationStatus and EquivalentInjection.regulationTarget are required in SSH. If EquivalentInjection.regulationCapability in EQ is false, then EquivalentInjection.regulationStatus and EquivalentInjection.regulationTarget are not exchanged in SSH.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value.
        OPTIONAL {$this cim:EquivalentInjection.regulationStatus ?rstatus}.
        OPTIONAL {$this cim:EquivalentInjection.regulationTarget ?rtarget}. 
        FILTER ((?value=true && (!bound(?rstatus) || !bound(?rtarget))) || (?value=false && (bound(?rstatus) || bound(?rtarget)))) .        
			}

Messages: ["Inconsistancy between EquivalentInjection.regulationCapability, EquivalentInjection.regulationStatus and EquivalentInjection.regulationTarget. "]

ssh456n:ExternalNetworkInjection

Severity: sh:Violation

Targets:

targetClass: cim:ExternalNetworkInjection

Nested Properties:

ssh456n:ExternalNetworkInjection.p-limits

Path: cim:ExternalNetworkInjection.p
The negated value (necessary due to sign convention) of ExternalNetworkInjection.p shall be less than or equal to ExternalNetworkInjection.maxP and shall be greater than or equal to ExternalNetworkInjection.minP.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        $this cim:ExternalNetworkInjection.maxP ?maxp . 
        $this cim:ExternalNetworkInjection.minP ?minp .
        FILTER (!(-?value<=?maxp && -?value>=?minp && ?value!=0) && !(?value<=?maxp && ?value>=?minp && ?value=0)) .        
			}

Messages: ["Active power is outside defined active power limits."]

ssh456n:ExternalNetworkInjection.q-limits

Path: cim:ExternalNetworkInjection.q
The negated value (necessary due to sign convention) of ExternalNetworkInjection.q shall be less than or equal to ExternalNetworkInjection.maxQ and shall be greater than or equal to ExternalNetworkInjection.minQ.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        $this cim:ExternalNetworkInjection.maxQ ?maxq . 
        $this cim:ExternalNetworkInjection.minQ ?minq .
        FILTER (!(-?value<=?maxq && -?value>=?minq && ?value!=0) && !(?value<=?maxq && ?value>=?minq && ?value=0)) .        
			}

Messages: ["Reactive power is outside defined reactive power limits."]

ssh456n:GeneratingUnit

Severity: sh:Violation

Targets:

targetNode: cim:AllGeneratingUnit

Nested Properties:

ssh456n:GeneratingUnit-singleActivePowerSlack

Path: rdf:type
Active power slack by a single generator per ControlArea: one generator has GeneratingUnit.normalPF set to a highest value (non-zero) and all other generating units have a zero GeneratingUnit.normalPF.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value ?countm ?countd (COUNT(?npf1) as ?counte) ?countall
        WHERE {
          ?gu cim:GeneratingUnit.normalPF ?npf1 .
          BIND ("" AS ?value).
          FILTER (?npf1=?countm)
          {
            SELECT $this (COUNT(DISTINCT ?npf) as ?countd) (MAX(?npf) as ?countm) (COUNT(?npf) as ?countall)
            WHERE {
              ?gu cim:GeneratingUnit.normalPF ?npf .
            }
            GROUP BY $this datatype(?npf)
          }
        }
        GROUP BY $this ?value ?countm ?countd datatype(?npf1) ?countall
        HAVING((?countd<2 && ?countall!=1) || ?countm=0 || ?counte!=1)
      

Messages: ["Either there is no highest value among GeneratingUnit.normalPF or there are multiple maximum values which are the same."]

ssh456n:RegulatingControl

Severity: sh:Violation

Targets:

targetClass: cim:RegulatingControl
targetClass: cim:TapChangerControl

Nested Properties:

ssh456n:RegulatingControl.targetValue-value

Path: cim:RegulatingControl.targetValue
RegulatingControl.targetValue shall be positive value in cases where the RegulatingControl.mode is set to voltage in EQ profile.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this cim:RegulatingControl.mode cim:RegulatingControlModeKind.voltage .
        $this $PATH ?value .
        FILTER (?value<=0 ) . 
        #FILTER (?value<=0 && ?mode=cim:RegulatingControlModeKind.voltage) .        
			}

Messages: ["The value is negative or zero for RegulatingControl in voltage mode."]

ssh456n:RotatingMachine

Severity: sh:Violation

Targets:

targetClass: cim:AsynchronousMachine
targetClass: cim:SynchronousMachine

Nested Properties:

ssh456n:RotatingMachine.p-limits

Path: cim:RotatingMachine.p
The negated value (necessary due to sign convention) of RotatingMachine.p shall be less than or equal to GeneratingUnit.maxOperatingP and shall be greater than or equal to GeneratingUnit.minOperatingP of the associated GeneratingUnit.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this cim:Equipment.inService true .
        $this cim:RotatingMachine.GeneratingUnit ?genunit.
        #BIND(EXISTS{$this cim:RotatingMachine.GeneratingUnit ?hasgenunit} AS ?hasgu).
        $this $PATH ?value .
        ?genunit cim:GeneratingUnit.maxOperatingP ?maxp . 
        ?genunit cim:GeneratingUnit.minOperatingP ?minp .
        FILTER (!(-?value<=?maxp && -?value>=?minp && ?value!=0) && !(?value<=?maxp && ?value>=?minp && ?value=0)) .        
        #FILTER (?hasgu=true && !(-?value<=?maxp && -?value>=?minp && ?value!=0) && !(?value<=?maxp && ?value>=?minp && ?value=0)) .        
			}

Messages: ["Active power is outside defined active power limits."]

ssh456n:RotatingMachine.q-limits

Path: cim:RotatingMachine.q
In case there is no ReactiveCapabilityCurve associated with the SynchronousMachine, the negated value (necessary due to sign convention) of RotatingMachine.q shall be less than or equal to SynchronousMachine.maxQ and shall be greater than or equal to SynchronousMachine.minQ.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this cim:Equipment.inService true .
        $this $PATH ?value .
        BIND(EXISTS{$this cim:SynchronousMachine.InitialReactiveCapabilityCurve ?curve} AS ?hascurve).
        #OPTIONAL {$this cim:SynchronousMachine.maxQ ?maxq}.
        #OPTIONAL {$this cim:SynchronousMachine.minQ ?minq}.
        $this cim:SynchronousMachine.maxQ ?maxq.
        $this cim:SynchronousMachine.minQ ?minq.
        #FILTER (?hascurve=false && bound(?maxq) && bound(?minq) && !(-?value<=?maxq && -?value>=?minq && ?value!=0) && !(?value<=?maxq && ?value>=?minq && ?value=0)) .  
        FILTER (?hascurve=false && !(-?value<=?maxq && -?value>=?minq && ?value!=0) && !(?value<=?maxq && ?value>=?minq && ?value=0)) .           
			}

Messages: ["Reactive power is outside defined reactive power limits."]

ssh456n:ShuntCompensator

Severity: sh:Violation

Targets:

targetClass: cim:LinearShuntCompensator
targetClass: cim:NonlinearShuntCompensator

Nested Properties:

ssh456n:ShuntCompensator.sections-value

Path: cim:ShuntCompensator.sections
In cases where RegulatingControl.discrete is true and RegulatingControl.enabled is true, ShuntCompensator.sections shall be integer.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        #OPTIONAL {$this cim:RegulatingCondEq.RegulatingControl ?contr}.
        #?contr cim:RegulatingControl.discrete ?discrete . 
        #?contr cim:RegulatingControl.enabled ?enabled .
        $this cim:RegulatingCondEq.RegulatingControl ?contr.
        ?contr cim:RegulatingControl.discrete true . 
        ?contr cim:RegulatingControl.enabled true .
        #FILTER (STRENDS(str(?value), ".") && !REGEX(STRAFTER(str(?value), "."), "^[0]$", "i") && bound(?contr) && ?discrete=true && ?enabled=true) .
        FILTER (STRENDS(str(?value), ".") && !REGEX(STRAFTER(str(?value), "."), "^[0]$", "i") ) .        
			}

Messages: ["The value is not integer for an active discrete regulating control."]

ssh456n:SynchronousMachine

Severity: sh:Violation

Targets:

targetClass: cim:SynchronousMachine

Nested Properties:

ssh456n:SynchronousMachine.operatingMode-matchType

Path: cim:SynchronousMachine.operatingMode
The SynchronousMachine.operatingMode shall be consistent with the SynchronousMachine.type. SynchronousMachine.operatingMode = motor shall be provided for SynchronousMachine.type in (motor, generatorOrMotor, motorOrCondenser, generatorOrCondenserOrMotor), SynchronousMachine.operatingMode = condenser shall be provided for SynchronousMachine.type in (condenser, generatorOrCondenser, motorOrCondenser, generatorOrCondenserOrMotor), and SynchronousMachine.operatingMode = generator shall be provided for SynchronousMachine.type in (generator, generatorOrMotor, generatorOrCondenser, generatorOrCondenserOrMotor).

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        $this cim:SynchronousMachine.type ?type .
         
        FILTER ((?value=cim:SynchronousMachineOperatingMode.motor && ?type NOT IN (cim:SynchronousMachineKind.motor , cim:SynchronousMachineKind.generatorOrMotor , cim:SynchronousMachineKind.motorOrCondenser , cim:SynchronousMachineKind.generatorOrCondenserOrMotor)) ||
        (?value=cim:SynchronousMachineOperatingMode.condenser && ?type NOT IN (cim:SynchronousMachineKind.condenser , cim:SynchronousMachineKind.generatorOrCondenser , cim:SynchronousMachineKind.motorOrCondenser , cim:SynchronousMachineKind.generatorOrCondenserOrMotor)) ||
        (?value=cim:SynchronousMachineOperatingMode.generator && ?type NOT IN (cim:SynchronousMachineKind.generator , cim:SynchronousMachineKind.generatorOrMotor , cim:SynchronousMachineKind.generatorOrCondenser , cim:SynchronousMachineKind.generatorOrCondenserOrMotor))) .        
			}

Messages: ["The value of SynchronousMachine.operatingMode is not consistent with the value of SynchronousMachine.type."]

ssh456n:RotatingMachine-pAndQcapabilityCurveQ

Path: rdf:type
In cases where a ReactiveCapabilityCurve is associated, the RotatingMachine.p shall be less than or equal to the maximum active power value defined by the curve and it shall be greater than or equal to the minimum active power value defined by the curve. The RotatingMachine.q shall be less than or equal to the maximum reactive power value defined by the curve and it shall be greater than or equal to the minimum reactive power value defined by the curve.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value 
			WHERE {
        $this cim:RotatingMachine.q ?value .
        OPTIONAL {$this cim:SynchronousMachine.InitialReactiveCapabilityCurve ?rcc } .
               
        {
        SELECT $this (MAX(?y2value) AS ?my2value)  (MIN(?y1value) AS ?my1value)
          WHERE {
            OPTIONAL {?rcc1 ^cim:SynchronousMachine.InitialReactiveCapabilityCurve $this } .
            ?rcc1 ^cim:CurveData.Curve ?curvedata .
            ?curvedata rdf:type ?cdtype .
            ?curvedata cim:CurveData.y1value ?y1value .
            ?curvedata cim:CurveData.y2value ?y2value .
            FILTER (bound(?rcc1) && ?cdtype=cim:CurveData ) .
          }
          GROUP BY $this ?cdtype
        }

        FILTER ( bound(?rcc) && !(-?value>=?my1value && -?value<=?my2value)).
			}

Messages: ["The reactive power is not within the limits defined by the ReactiveCapabilityCurve."]

ssh456n:RotatingMachine-pAndQcapabilityCurveP

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value 
			WHERE {
        $this cim:RotatingMachine.p ?value .
        OPTIONAL {$this cim:SynchronousMachine.InitialReactiveCapabilityCurve ?rcc } .
               
        {
        SELECT $this (MAX(?xvalue) AS ?maxxvalue)  (MIN(?xvalue) AS ?minxvalue)
          WHERE {
            OPTIONAL {?rcc1 ^cim:SynchronousMachine.InitialReactiveCapabilityCurve $this } .
            ?rcc1 ^cim:CurveData.Curve ?curvedata .
            ?curvedata rdf:type ?cdtype .
            ?curvedata cim:CurveData.xvalue ?xvalue .
            FILTER (bound(?rcc1) && ?cdtype=cim:CurveData ) .
          }
          GROUP BY $this ?cdtype
        }

        FILTER ( bound(?rcc) && !(-?value>=?minxvalue && -?value<=?maxxvalue)).
			}

Messages: ["The active power is not within the limits defined by the ReactiveCapabilityCurve."]

ssh456n:TapChanger

Severity: sh:Violation

Targets:

targetClass: cim:RatioTapChanger
targetClass: cim:PhaseTapChangerLinear
targetClass: cim:PhaseTapChangerSymmetrical
targetClass: cim:PhaseTapChangerAsymmetrical
targetClass: cim:PhaseTapChangerTabular

Nested Properties:

ssh456n:TapChanger.step-value

Path: cim:TapChanger.step
In cases where RegulatingControl.discrete is true and RegulatingControl.enabled is true, TapChanger.step shall be integer.

Severity: sh:Violation

Constraints:

sh:SPARQLConstraintComponent (Severity: sh:Violation)

PREFIX cim: <http://iec.ch/TC57/CIM100#>
PREFIX rdf: <http://www.w3.org/1999/02/22-rdf-syntax-ns#>
PREFIX eu: <http://iec.ch/TC57/CIM100-European#>

			SELECT  $this ?value
			WHERE {
        $this $PATH ?value .
        #OPTIONAL {$this cim:TapChanger.TapChangerControl ?contr}.
        #?contr cim:RegulatingControl.discrete ?discrete . 
        #?contr cim:RegulatingControl.enabled ?enabled .
        $this cim:TapChanger.TapChangerControl ?contr.
        ?contr cim:RegulatingControl.discrete true . 
        ?contr cim:RegulatingControl.enabled true .
        #FILTER (STRENDS(str(?value), ".") && !REGEX(STRAFTER(str(?value), "."), "^[0]$", "i")  && bound(?contr) && ?discrete=true && ?enabled=true) .  
        FILTER (STRENDS(str(?value), ".") && !REGEX(STRAFTER(str(?value), "."), "^[0]$", "i")) .         
			}

Messages: ["The value is not integer for an active discrete regulating control."]

ssh456n:Equipment​

ssh456n:EquivalentInjection​

ssh456n:EquivalentInjection.p-limits​

ssh456n:EquivalentInjection.q-limits​

ssh456n:EquivalentInjection-regulation​

ssh456n:ExternalNetworkInjection​

ssh456n:ExternalNetworkInjection.p-limits​

ssh456n:ExternalNetworkInjection.q-limits​

ssh456n:GeneratingUnit​

ssh456n:GeneratingUnit-singleActivePowerSlack​

ssh456n:RegulatingControl​

ssh456n:RegulatingControl.targetValue-value​

ssh456n:RotatingMachine​

ssh456n:RotatingMachine.p-limits​

ssh456n:RotatingMachine.q-limits​

ssh456n:ShuntCompensator​

ssh456n:ShuntCompensator.sections-value​

ssh456n:SynchronousMachine​

ssh456n:SynchronousMachine.operatingMode-matchType​

ssh456n:RotatingMachine-pAndQcapabilityCurveQ​

ssh456n:RotatingMachine-pAndQcapabilityCurveP​

ssh456n:TapChanger​

ssh456n:TapChanger.step-value​

ssh456n:Equipment

ssh456n:EquivalentInjection

ssh456n:EquivalentInjection.p-limits

ssh456n:EquivalentInjection.q-limits

ssh456n:EquivalentInjection-regulation

ssh456n:ExternalNetworkInjection

ssh456n:ExternalNetworkInjection.p-limits

ssh456n:ExternalNetworkInjection.q-limits

ssh456n:GeneratingUnit

ssh456n:GeneratingUnit-singleActivePowerSlack

ssh456n:RegulatingControl

ssh456n:RegulatingControl.targetValue-value

ssh456n:RotatingMachine

ssh456n:RotatingMachine.p-limits

ssh456n:RotatingMachine.q-limits

ssh456n:ShuntCompensator

ssh456n:ShuntCompensator.sections-value

ssh456n:SynchronousMachine

ssh456n:SynchronousMachine.operatingMode-matchType

ssh456n:RotatingMachine-pAndQcapabilityCurveQ

ssh456n:RotatingMachine-pAndQcapabilityCurveP

ssh456n:TapChanger

ssh456n:TapChanger.step-value