61970-600-2_DiagramLayout-AP-Con-Simple-SHACL

dl:Diagram

Severity: sh:Violation

Targets:

• targetClass: cim:Diagram

Nested Properties:

dl:Diagram.DiagramStyle-cardinality

Path: cim:Diagram.DiagramStyle
Name: Diagram.DiagramStyle-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:Diagram.DiagramStyle-valueType

Path: cim:Diagram.DiagramStyle / rdf:type
Name: Diagram.DiagramStyle-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type shall be an instance of the class: cim:DiagramStyle"

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DiagramStyle]

dl:Diagram.orientation-datatype

Path: cim:Diagram.orientation
Name: Diagram.orientation-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not IRI (Internationalized Resource Identifier) or it is enumerated value not part of the profile."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:OrientationKind.positive cim:OrientationKind.negative]

dl:Diagram.orientation-cardinality

Path: cim:Diagram.orientation
Name: Diagram.orientation-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:Diagram.x1InitialView-cardinality

Path: cim:Diagram.x1InitialView
Name: Diagram.x1InitialView-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:Diagram.x1InitialView-datatype

Path: cim:Diagram.x1InitialView
Name: Diagram.x1InitialView-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:Diagram.x2InitialView-datatype

Path: cim:Diagram.x2InitialView
Name: Diagram.x2InitialView-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:Diagram.x2InitialView-cardinality

Path: cim:Diagram.x2InitialView
Name: Diagram.x2InitialView-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:Diagram.y1InitialView-datatype

Path: cim:Diagram.y1InitialView
Name: Diagram.y1InitialView-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:Diagram.y1InitialView-cardinality

Path: cim:Diagram.y1InitialView
Name: Diagram.y1InitialView-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:Diagram.y2InitialView-cardinality

Path: cim:Diagram.y2InitialView
Name: Diagram.y2InitialView-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:Diagram.y2InitialView-datatype

Path: cim:Diagram.y2InitialView
Name: Diagram.y2InitialView-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.description-datatype

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.description-cardinality

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-datatype

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.mRID-cardinality

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.name-cardinality

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.name-datatype

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject

Severity: sh:Violation

Targets:

• targetClass: cim:DiagramObject

Nested Properties:

dl:DiagramObject.Diagram-cardinality

Path: cim:DiagramObject.Diagram
Name: DiagramObject.Diagram-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Missing required association."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.Diagram-valueType

Path: cim:DiagramObject.Diagram / rdf:type
Name: DiagramObject.Diagram-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type shall be an instance of the class: cim:Diagram"

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:Diagram]

dl:DiagramObject.DiagramObjectStyle-cardinality

Path: cim:DiagramObject.DiagramObjectStyle
Name: DiagramObject.DiagramObjectStyle-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.DiagramObjectStyle-valueType

Path: cim:DiagramObject.DiagramObjectStyle / rdf:type
Name: DiagramObject.DiagramObjectStyle-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type shall be an instance of the class: cim:DiagramObjectStyle"

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DiagramObjectStyle]

io:DiagramObject.IdentifiedObject-cardinality

Path: cim:DiagramObject.IdentifiedObject
Name: DiagramObject.IdentifiedObject-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.drawingOrder-cardinality

Path: cim:DiagramObject.drawingOrder
Name: DiagramObject.drawingOrder-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.drawingOrder-datatype

Path: cim:DiagramObject.drawingOrder
Name: DiagramObject.drawingOrder-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:integer
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.isPolygon-datatype

Path: cim:DiagramObject.isPolygon
Name: DiagramObject.isPolygon-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:boolean
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.isPolygon-cardinality

Path: cim:DiagramObject.isPolygon
Name: DiagramObject.isPolygon-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.offsetX-cardinality

Path: cim:DiagramObject.offsetX
Name: DiagramObject.offsetX-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.offsetX-datatype

Path: cim:DiagramObject.offsetX
Name: DiagramObject.offsetX-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.offsetY-cardinality

Path: cim:DiagramObject.offsetY
Name: DiagramObject.offsetY-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.offsetY-datatype

Path: cim:DiagramObject.offsetY
Name: DiagramObject.offsetY-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.rotation-cardinality

Path: cim:DiagramObject.rotation
Name: DiagramObject.rotation-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.rotation-datatype

Path: cim:DiagramObject.rotation
Name: DiagramObject.rotation-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.description-cardinality

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.description-datatype

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.mRID-cardinality

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-datatype

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-datatype

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-cardinality

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.IdentifiedObject-valueTypeNodeShape

Severity: sh:Violation

Targets:

• targetClass: cim:TextDiagramObject
• targetClass: cim:DiagramObject

Nested Properties:

dl:DiagramObject.IdentifiedObject-valueType

Path: cim:DiagramObject.IdentifiedObject / rdf:type
Name: DiagramObject.IdentifiedObject-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following occurs: 1) The value type is not IRI; 2) The value type is not the right class."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:Diagram cim:DiagramObject cim:VisibilityLayer cim:DiagramStyle cim:DiagramObjectStyle cim:TextDiagramObject]

dl:DiagramObjectGluePoint

Severity: sh:Violation

Targets:

• targetClass: cim:DiagramObjectGluePoint

dl:DiagramObjectPoint

Severity: sh:Violation

Targets:

• targetClass: cim:DiagramObjectPoint

Nested Properties:

dl:DiagramObjectPoint.DiagramObject-cardinality

Path: cim:DiagramObjectPoint.DiagramObject
Name: DiagramObjectPoint.DiagramObject-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Missing required association."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObjectPoint.DiagramObjectGluePoint-cardinality

Path: cim:DiagramObjectPoint.DiagramObjectGluePoint
Name: DiagramObjectPoint.DiagramObjectGluePoint-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObjectPoint.DiagramObjectGluePoint-valueType

Path: cim:DiagramObjectPoint.DiagramObjectGluePoint / rdf:type
Name: DiagramObjectPoint.DiagramObjectGluePoint-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type shall be an instance of the class: cim:DiagramObjectGluePoint"

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DiagramObjectGluePoint]

dl:DiagramObjectPoint.sequenceNumber-datatype

Path: cim:DiagramObjectPoint.sequenceNumber
Name: DiagramObjectPoint.sequenceNumber-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:integer
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObjectPoint.sequenceNumber-cardinality

Path: cim:DiagramObjectPoint.sequenceNumber
Name: DiagramObjectPoint.sequenceNumber-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObjectPoint.xPosition-cardinality

Path: cim:DiagramObjectPoint.xPosition
Name: DiagramObjectPoint.xPosition-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObjectPoint.xPosition-datatype

Path: cim:DiagramObjectPoint.xPosition
Name: DiagramObjectPoint.xPosition-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObjectPoint.yPosition-cardinality

Path: cim:DiagramObjectPoint.yPosition
Name: DiagramObjectPoint.yPosition-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObjectPoint.yPosition-datatype

Path: cim:DiagramObjectPoint.yPosition
Name: DiagramObjectPoint.yPosition-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObjectPoint.zPosition-cardinality

Path: cim:DiagramObjectPoint.zPosition
Name: DiagramObjectPoint.zPosition-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObjectPoint.zPosition-datatype

Path: cim:DiagramObjectPoint.zPosition
Name: DiagramObjectPoint.zPosition-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObjectPoint.DiagramObject-valueTypeNodeShape

Severity: sh:Violation

Targets:

• targetClass: cim:DiagramObjectPoint

Nested Properties:

dl:DiagramObjectPoint.DiagramObject-valueType

Path: cim:DiagramObjectPoint.DiagramObject / rdf:type
Name: DiagramObjectPoint.DiagramObject-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following occurs: 1) The value type is not IRI; 2) The value type is not the right class."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DiagramObject cim:TextDiagramObject]

dl:DiagramObjectStyle

Severity: sh:Violation

Targets:

• targetClass: cim:DiagramObjectStyle

Nested Properties:

io:IdentifiedObject.description-datatype

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.description-cardinality

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-cardinality

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-datatype

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-datatype

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-cardinality

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramStyle

Severity: sh:Violation

Targets:

• targetClass: cim:DiagramStyle

Nested Properties:

io:IdentifiedObject.description-datatype

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.description-cardinality

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-cardinality

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-datatype

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-datatype

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-cardinality

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:TextDiagramObject

Severity: sh:Violation

Targets:

• targetClass: cim:TextDiagramObject

Nested Properties:

dl:DiagramObject.Diagram-cardinality

Path: cim:DiagramObject.Diagram
Name: DiagramObject.Diagram-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Missing required association."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.Diagram-valueType

Path: cim:DiagramObject.Diagram / rdf:type
Name: DiagramObject.Diagram-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type shall be an instance of the class: cim:Diagram"

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:Diagram]

dl:DiagramObject.DiagramObjectStyle-cardinality

Path: cim:DiagramObject.DiagramObjectStyle
Name: DiagramObject.DiagramObjectStyle-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.DiagramObjectStyle-valueType

Path: cim:DiagramObject.DiagramObjectStyle / rdf:type
Name: DiagramObject.DiagramObjectStyle-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type shall be an instance of the class: cim:DiagramObjectStyle"

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DiagramObjectStyle]

io:DiagramObject.IdentifiedObject-cardinality

Path: cim:DiagramObject.IdentifiedObject
Name: DiagramObject.IdentifiedObject-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.drawingOrder-cardinality

Path: cim:DiagramObject.drawingOrder
Name: DiagramObject.drawingOrder-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.drawingOrder-datatype

Path: cim:DiagramObject.drawingOrder
Name: DiagramObject.drawingOrder-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:integer
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.isPolygon-cardinality

Path: cim:DiagramObject.isPolygon
Name: DiagramObject.isPolygon-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.isPolygon-datatype

Path: cim:DiagramObject.isPolygon
Name: DiagramObject.isPolygon-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:boolean
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.offsetX-datatype

Path: cim:DiagramObject.offsetX
Name: DiagramObject.offsetX-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.offsetX-cardinality

Path: cim:DiagramObject.offsetX
Name: DiagramObject.offsetX-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.offsetY-datatype

Path: cim:DiagramObject.offsetY
Name: DiagramObject.offsetY-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.offsetY-cardinality

Path: cim:DiagramObject.offsetY
Name: DiagramObject.offsetY-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:DiagramObject.rotation-datatype

Path: cim:DiagramObject.rotation
Name: DiagramObject.rotation-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:float
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:DiagramObject.rotation-cardinality

Path: cim:DiagramObject.rotation
Name: DiagramObject.rotation-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.description-cardinality

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.description-datatype

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.mRID-cardinality

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-datatype

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-cardinality

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.name-datatype

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:TextDiagramObject.text-datatype

Path: cim:TextDiagramObject.text
Name: TextDiagramObject.text-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:TextDiagramObject.text-cardinality

Path: cim:TextDiagramObject.text
Name: TextDiagramObject.text-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:VisibilityLayer

Severity: sh:Violation

Targets:

• targetClass: cim:VisibilityLayer

Nested Properties:

io:IdentifiedObject.description-cardinality

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.description-datatype

Path: cim:IdentifiedObject.description
Name: IdentifiedObject.description-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.mRID-cardinality

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

io:IdentifiedObject.mRID-datatype

Path: cim:IdentifiedObject.mRID
Name: IdentifiedObject.mRID-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-datatype

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:string
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

io:IdentifiedObject.name-cardinality

Path: cim:IdentifiedObject.name
Name: IdentifiedObject.name-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Missing required property (attribute)."

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1
• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:VisibilityLayer.VisibleObjects-cardinality

Path: cim:VisibilityLayer.VisibleObjects
Name: VisibilityLayer.VisibleObjects-cardinality
This constraint validates the cardinality of the association at the used direction.

Severity: sh:Violation

Messages:

• "Cardinality violation. Lower bound shall be 1"

Constraints:

• sh:MinCountConstraintComponent (Severity: sh:Violation)
  • MinCount: 1

dl:VisibilityLayer.drawingOrder-cardinality

Path: cim:VisibilityLayer.drawingOrder
Name: VisibilityLayer.drawingOrder-cardinality
This constraint validates the cardinality of the property (attribute).

Severity: sh:Violation

Messages:

• "Cardinality violation. Upper bound shall be 1"

Constraints:

• sh:MaxCountConstraintComponent (Severity: sh:Violation)
  • MaxCount: 1

dl:VisibilityLayer.drawingOrder-datatype

Path: cim:VisibilityLayer.drawingOrder
Name: VisibilityLayer.drawingOrder-datatype
This constraint validates the datatype of the property (attribute).

Severity: sh:Violation

Messages:

• "The datatype is not literal or it violates the xsd datatype."

Constraints:

• sh:DatatypeConstraintComponent (Severity: sh:Violation)
  • Datatype: xsd:integer
• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:Literal

dl:VisibilityLayer.VisibleObjects-valueTypeNodeShape

Severity: sh:Violation

Targets:

• targetClass: cim:VisibilityLayer

Nested Properties:

dl:VisibilityLayer.VisibleObjects-valueType

Path: cim:VisibilityLayer.VisibleObjects / rdf:type
Name: VisibilityLayer.VisibleObjects-valueType
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following occurs: 1) The value type is not IRI; 2) The value type is not the right class."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DiagramObject cim:TextDiagramObject]