Skip to main content

61970-456_SteadyStateHypothesis-AP-Con-Complex-SHACL

ssh456c:ConformLoad​

Severity: sh:Violation

Targets:

  • targetClass: cim:ConformLoad

Nested Properties:

ssh456c:EnergyConsumer.p-valueRange​

Path: cim:EnergyConsumer.p
Negative active power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:EnergyConsumer.q-valueRange​

Path: cim:EnergyConsumer.q
Negative reactive power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:EnergyConsumer​

Severity: sh:Violation

Targets:

  • targetClass: cim:EnergyConsumer

Nested Properties:

ssh456c:EnergyConsumer.p-valueRange​

Path: cim:EnergyConsumer.p
Negative active power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:EnergyConsumer.q-valueRange​

Path: cim:EnergyConsumer.q
Negative reactive power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:EnergySource-EnergySourcePQ​

The attributes voltageAngle and voltageMagnitude shall not be used when the EnergySource is representing a constant active and reactive power injection (PQ injection), i.e. they shall only be used when the EnergySource is modelling a voltage source.

Severity: sh:Warning

Messages:

  • "EnergySource modelled as voltage source (attributes voltageAngle and voltageMagnitude are used). Please assess depending on the use case."

Targets:

  • targetClass: cim:EnergySource

Constraints:

  • sh:AndConstraintComponent (Severity: sh:Warning)
    • Shapes: [[{[cim:EnergySource.voltageMagnitude] sh:Violation sh:MinCountConstraintComponent map[MinCount:0]} {[cim:EnergySource.voltageMagnitude] sh:Violation sh:MaxCountConstraintComponent map[MaxCount:0]}] [{[cim:EnergySource.voltageAngle] sh:Violation sh:MinCountConstraintComponent map[MinCount:0]} {[cim:EnergySource.voltageAngle] sh:Violation sh:MaxCountConstraintComponent map[MaxCount:0]}]]

ssh456c:NonConformLoad​

Severity: sh:Violation

Targets:

  • targetClass: cim:NonConformLoad

Nested Properties:

ssh456c:EnergyConsumer.p-valueRange​

Path: cim:EnergyConsumer.p
Negative active power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:EnergyConsumer.q-valueRange​

Path: cim:EnergyConsumer.q
Negative reactive power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:StationSupply​

Severity: sh:Violation

Targets:

  • targetClass: cim:StationSupply

Nested Properties:

ssh456c:EnergyConsumer.p-valueRange​

Path: cim:EnergyConsumer.p
Negative active power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0

ssh456c:EnergyConsumer.q-valueRange​

Path: cim:EnergyConsumer.q
Negative reactive power loads shall not be exchanged. In cases where this is needed EquivalentInjection is used instead.

Severity: sh:Violation

Messages:

  • "The value is negative."

Constraints:

  • sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
    • Value: 0.0