61970-456_StateVariables-AP-Con-Complex-Explicit-CrossProfile-SHACL

sv456cpe:DCTopologicalIsland.DCTopologicalNodes

Severity: sh:Violation

Targets:

• targetClass: cim:DCTopologicalIsland

Nested Properties:

sv456cpe:DCTopologicalIsland.DCTopologicalNodes-valueType

Path: cim:DCTopologicalIsland.DCTopologicalNodes / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class DCTopologicalNode or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:DCTopologicalNode]

sv456cpe:SvInjection.TopologicalNode

Severity: sh:Violation

Targets:

• targetClass: cim:SvInjection

Nested Properties:

sv456cpe:SvInjection.TopologicalNode-valueType

Path: cim:SvInjection.TopologicalNode / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class TopologicalNode or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:TopologicalNode]

sv456cpe:SvPowerFlow.Terminal

Severity: sh:Violation

Targets:

• targetClass: cim:SvPowerFlow

Nested Properties:

sv456cpe:SvPowerFlow.Terminal-valueType

Path: cim:SvPowerFlow.Terminal / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class Terminal or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:Terminal]

sv456cpe:SvShuntCompensatorSections.ShuntCompensator

Severity: sh:Violation

Targets:

• targetClass: cim:SvShuntCompensatorSections

Nested Properties:

sv456cpe:SvShuntCompensatorSections.ShuntCompensator-valueType

Path: cim:SvShuntCompensatorSections.ShuntCompensator / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class ShuntCompensator or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:LinearShuntCompensator cim:NonlinearShuntCompensator]

sv456cpe:SvStatus.ConductingEquipment

Severity: sh:Violation

Targets:

• targetClass: cim:SvStatus

Nested Properties:

sv456cpe:SvStatus.ConductingEquipment-valueType

Path: cim:SvStatus.ConductingEquipment / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class ConductingEquipment or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:NonConformLoad cim:Jumper cim:EquivalentShunt cim:Fuse cim:Cut cim:Junction cim:PowerElectronicsConnection cim:CsConverter cim:EnergyConsumer cim:AsynchronousMachine cim:SynchronousMachine cim:EquivalentBranch cim:Clamp cim:DisconnectingCircuitBreaker cim:EquivalentInjection cim:StationSupply cim:BusbarSection cim:ACLineSegment cim:StaticVarCompensator cim:Disconnector cim:GroundingImpedance cim:LoadBreakSwitch cim:PowerTransformer cim:PetersenCoil cim:Switch cim:LinearShuntCompensator cim:Ground cim:SeriesCompensator cim:GroundDisconnector cim:VsConverter cim:Breaker cim:EnergySource cim:NonlinearShuntCompensator cim:ExternalNetworkInjection cim:ConformLoad cim:Equipment]

sv456cpe:SvSwitch.Switch

Severity: sh:Violation

Targets:

• targetClass: cim:SvSwitch

Nested Properties:

sv456cpe:SvSwitch.Switch-valueType

Path: cim:SvSwitch.Switch / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class Switch or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:Switch cim:Disconnector cim:Jumper cim:DisconnectingCircuitBreaker cim:Breaker cim:LoadBreakSwitch cim:Cut cim:Fuse cim:GroundDisconnector cim:Equipment]

sv456cpe:SvTapStep.TapChanger

Severity: sh:Violation

Targets:

• targetClass: cim:SvTapStep

Nested Properties:

sv456cpe:SvTapStep.TapChanger-valueType

Path: cim:SvTapStep.TapChanger / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class TapChanger or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:RatioTapChanger cim:PhaseTapChangerLinear cim:PhaseTapChangerTabular cim:PhaseTapChangerAsymmetrical cim:PhaseTapChangerSymmetrical]

sv456cpe:SvVoltage.TopologicalNode

Severity: sh:Violation

Targets:

• targetClass: cim:SvVoltage

Nested Properties:

sv456cpe:SvVoltage.TopologicalNode-valueType

Path: cim:SvVoltage.TopologicalNode / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class TopologicalNode or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:TopologicalNode]

sv456cpe:TopologicalIsland.AngleRefTopologicalNode

Severity: sh:Violation

Targets:

• targetClass: cim:TopologicalIsland

Nested Properties:

sv456cpe:TopologicalIsland.AngleRefTopologicalNode-valueType

Path: cim:TopologicalIsland.AngleRefTopologicalNode / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class TopologicalNode or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:TopologicalNode]

sv456cpe:TopologicalIsland.TopologicalNodes

Severity: sh:Violation

Targets:

• targetClass: cim:TopologicalIsland

Nested Properties:

sv456cpe:TopologicalIsland.TopologicalNodes-valueType

Path: cim:TopologicalIsland.TopologicalNodes / rdf:type
This constraint validates the value type of the association at the used direction.

Severity: sh:Violation

Messages:

• "One of the following does not conform: 1) The value type shall be IRI; 2) The value type is not an instance of the class TopologicalNode or its subclass."

Constraints:

• sh:NodeKindConstraintComponent (Severity: sh:Violation)
  • NodeKind: sh:IRI
• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:TopologicalNode]