61970-302_Dynamics-AP-Con-Complex-SHACL

dy302c:AsynchronousMachineEquivalentCircuit

Severity: sh:Violation

Targets:

• targetClass: cim:AsynchronousMachineEquivalentCircuit

Nested Properties:

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance

Severity: sh:Violation

Targets:

• targetClass: cim:AsynchronousMachineTimeConstantReactance

Nested Properties:

dy302c:AsynchronousMachineTimeConstantReactance.tppo-valueRange

Path: cim:AsynchronousMachineTimeConstantReactance.tppo
Subtransient rotor time constant (T''o) (> 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance.tpo-valueRangePair

Path: cim:AsynchronousMachineTimeConstantReactance.tppo
Transient rotor time constant (T'o) (> AsynchronousMachineTimeConstantReactance.tppo). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.tpo."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.tpo

dy302c:AsynchronousMachineTimeConstantReactance.xs-valueRangePair

Path: cim:AsynchronousMachineTimeConstantReactance.xp
Synchronous reactance (Xs) (>= AsynchronousMachineTimeConstantReactance.xp). Typical value = 1,8.

Severity: sh:Violation

Messages:

• "The value is greater than AsynchronousMachineTimeConstantReactance.xs."

Constraints:

• sh:LessThanOrEqualsConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xs

dy302c:AsynchronousMachineTimeConstantReactance.xp-valueRangePair

Path: cim:AsynchronousMachineTimeConstantReactance.xpp
Transient reactance (unsaturated) (X') (>= AsynchronousMachineTimeConstantReactance.xpp). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is greater than AsynchronousMachineTimeConstantReactance.xp."

Constraints:

• sh:LessThanOrEqualsConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xp

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineUserDefined

Severity: sh:Violation

Targets:

• targetClass: cim:AsynchronousMachineUserDefined

Nested Properties:

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC1A

Severity: sh:Violation

Targets:

• targetClass: cim:DiscExcContIEEEDEC1A

Nested Properties:

dy302c:DiscExcContIEEEDEC1A.tan-valueRange

Path: cim:DiscExcContIEEEDEC1A.tan
Discontinuous controller time constant (T_AN) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC1A.td-valueRange

Path: cim:DiscExcContIEEEDEC1A.td
Time constant (T_D) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC1A.tl1-valueRange

Path: cim:DiscExcContIEEEDEC1A.tl1
Time constant (T_L1) (>= 0). Typical value = 0,025.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC1A.tl2-valueRange

Path: cim:DiscExcContIEEEDEC1A.tl2
Time constant (T_L2) (>= 0). Typical value = 1,25.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC1A.tw5-valueRange

Path: cim:DiscExcContIEEEDEC1A.tw5
DEC washout time constant (T_W5) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC1A.vomin-valueRangePair

Path: cim:DiscExcContIEEEDEC1A.vomin
Limiter (V_OMIN) (< DiscExcContIEEEDEC1A.vomax). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than DiscExcContIEEEDEC1A.vomax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:DiscExcContIEEEDEC1A.vomax

dy302c:DiscExcContIEEEDEC1A.vsmin-valueRangePair

Path: cim:DiscExcContIEEEDEC1A.vsmin
Limiter (V_SMIN) (< DiscExcContIEEEDEC1A.vsmax). Typical value = -0,066.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than DiscExcContIEEEDEC1A.vsmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:DiscExcContIEEEDEC1A.vsmax

dy302c:DiscExcContIEEEDEC2A

Severity: sh:Violation

Targets:

• targetClass: cim:DiscExcContIEEEDEC2A

Nested Properties:

dy302c:DiscExcContIEEEDEC2A.td1-valueRange

Path: cim:DiscExcContIEEEDEC2A.td1
Discontinuous controller time constant (T_D1) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC2A.td2-valueRange

Path: cim:DiscExcContIEEEDEC2A.td2
Discontinuous controller washout time constant (T_D2) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:DiscExcContIEEEDEC2A.vdmin-valueRangePair

Path: cim:DiscExcContIEEEDEC2A.vdmin
Limiter (V_DMIN) (< DiscExcContIEEEDEC2A.vdmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than DiscExcContIEEEDEC2A.vdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:DiscExcContIEEEDEC2A.vdmax

dy302c:DiscExcContIEEEDEC3A

Severity: sh:Violation

Targets:

• targetClass: cim:DiscExcContIEEEDEC3A

Nested Properties:

dy302c:DiscExcContIEEEDEC3A.tdr-valueRange

Path: cim:DiscExcContIEEEDEC3A.tdr
Reset time delay (T_DR) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC1A

Nested Properties:

dy302c:ExcAC1A.ka-valueRange

Path: cim:ExcAC1A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 400.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.kc-valueRange

Path: cim:ExcAC1A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.kd-valueRange

Path: cim:ExcAC1A.kd
Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 0,38.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.kf-valueRange

Path: cim:ExcAC1A.kf
Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.kf1-valueRange

Path: cim:ExcAC1A.kf1
Coefficient to allow different usage of the model (Kf1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.kf2-valueRange

Path: cim:ExcAC1A.kf2
Coefficient to allow different usage of the model (Kf2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.ks-valueRange

Path: cim:ExcAC1A.ks
Coefficient to allow different usage of the model-speed coefficient (Ks) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.seve1-valueRange

Path: cim:ExcAC1A.seve1
Exciter saturation function value at the corresponding exciter voltage, Ve₁, back of commutating reactance (Se[Ve₁]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.seve2-valueRange

Path: cim:ExcAC1A.seve2
Exciter saturation function value at the corresponding exciter voltage, Ve₂, back of commutating reactance (Se[Ve₂]) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.ta-valueRange

Path: cim:ExcAC1A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.tb-valueRange

Path: cim:ExcAC1A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.tc-valueRange

Path: cim:ExcAC1A.tc
Voltage regulator time constant (T_c) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.te-valueRange

Path: cim:ExcAC1A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.tf-valueRange

Path: cim:ExcAC1A.tf
Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.vamax-valueRange

Path: cim:ExcAC1A.vamax
Maximum voltage regulator output (V_amax) (> 0). Typical value = 14,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.vamin-valueRange

Path: cim:ExcAC1A.vamin
Minimum voltage regulator output (V_amin) (< 0). Typical value = -14,5.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.ve1-valueRange

Path: cim:ExcAC1A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve1) (> 0). Typical value = 4,18.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.ve2-valueRange

Path: cim:ExcAC1A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve2) (> 0). Typical value = 3,14.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.vrmax-valueRange

Path: cim:ExcAC1A.vrmax
Maximum voltage regulator outputs (Vrmax) (> 0). Typical value = 6,03.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC1A.vrmin-valueRange

Path: cim:ExcAC1A.vrmin
Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -5,43.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC2A

Nested Properties:

dy302c:ExcAC2A.ka-valueRange

Path: cim:ExcAC2A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 400.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.kb-valueRange

Path: cim:ExcAC2A.kb
Second stage regulator gain (Kb) (> 0). Exciter field current controller gain. Typical value = 25.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.kc-valueRange

Path: cim:ExcAC2A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,28.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.kd-valueRange

Path: cim:ExcAC2A.kd
Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 0,35.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.kf-valueRange

Path: cim:ExcAC2A.kf
Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.kh-valueRange

Path: cim:ExcAC2A.kh
Exciter field current feedback gain (Kh) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.ks-valueRange

Path: cim:ExcAC2A.ks
Coefficient to allow different usage of the model-speed coefficient (Ks) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.seve1-valueRange

Path: cim:ExcAC2A.seve1
Exciter saturation function value at the corresponding exciter voltage, Ve₁, back of commutating reactance (Se[Ve₁]) (>= 0). Typical value = 0,037.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.seve2-valueRange

Path: cim:ExcAC2A.seve2
Exciter saturation function value at the corresponding exciter voltage, Ve₂, back of commutating reactance (Se[Ve₂]) (>= 0). Typical value = 0,012.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.ta-valueRange

Path: cim:ExcAC2A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.tb-valueRange

Path: cim:ExcAC2A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.tc-valueRange

Path: cim:ExcAC2A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.te-valueRange

Path: cim:ExcAC2A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,6.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.tf-valueRange

Path: cim:ExcAC2A.tf
Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.vamax-valueRange

Path: cim:ExcAC2A.vamax
Maximum voltage regulator output (Vamax) (> 0). Typical value = 8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.vamin-valueRange

Path: cim:ExcAC2A.vamin
Minimum voltage regulator output (Vamin) (< 0). Typical value = -8.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.ve1-valueRange

Path: cim:ExcAC2A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₁) (> 0). Typical value = 4,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.ve2-valueRange

Path: cim:ExcAC2A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₂) (> 0). Typical value = 3,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.vfemax-valueRange

Path: cim:ExcAC2A.vfemax
Exciter field current limit reference (Vfemax) (>= 0). Typical value = 4,4.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.vlr-valueRange

Path: cim:ExcAC2A.vlr
Maximum exciter field current (Vlr) (> 0). Typical value = 4,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.vrmax-valueRange

Path: cim:ExcAC2A.vrmax
Maximum voltage regulator outputs (Vrmax) (> 0). Typical value = 105.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC2A.vrmin-valueRange

Path: cim:ExcAC2A.vrmin
Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -95.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC3A

Nested Properties:

dy302c:ExcAC3A.efdn-valueRange

Path: cim:ExcAC3A.efdn
Value of Efd at which feedback gain changes (Efdn) (> 0). Typical value = 2,36.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.ka-valueRange

Path: cim:ExcAC3A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 45,62.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.kc-valueRange

Path: cim:ExcAC3A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,104.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.kd-valueRange

Path: cim:ExcAC3A.kd
Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 0,499.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.kf-valueRange

Path: cim:ExcAC3A.kf
Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,143.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.kn-valueRange

Path: cim:ExcAC3A.kn
Excitation control system stabilizer gain (Kn) (>= 0). Typical value =0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.kr-valueRange

Path: cim:ExcAC3A.kr
Constant associated with regulator and alternator field power supply (Kr) (> 0). Typical value =3,77.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.seve1-valueRange

Path: cim:ExcAC3A.seve1
Exciter saturation function value at the corresponding exciter voltage, Ve₁, back of commutating reactance (Se[Ve₁]) (>= 0). Typical value = 1,143.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.seve2-valueRange

Path: cim:ExcAC3A.seve2
Exciter saturation function value at the corresponding exciter voltage, Ve₂, back of commutating reactance (Se[Ve₂]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.ta-valueRange

Path: cim:ExcAC3A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,013.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.tb-valueRange

Path: cim:ExcAC3A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.tc-valueRange

Path: cim:ExcAC3A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.te-valueRange

Path: cim:ExcAC3A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,17.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.tf-valueRange

Path: cim:ExcAC3A.tf
Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.vamax-valueRange

Path: cim:ExcAC3A.vamax
Maximum voltage regulator output (Vamax) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.vamin-valueRange

Path: cim:ExcAC3A.vamin
Minimum voltage regulator output (Vamin) (< 0). Typical value = -0,95.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.ve1-valueRange

Path: cim:ExcAC3A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₁) (> 0). Typical value = 6.24.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.ve2-valueRange

Path: cim:ExcAC3A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₂) (> 0). Typical value = 4,68.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.vemin-valueRange

Path: cim:ExcAC3A.vemin
Minimum exciter voltage output (Vemin) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC3A.vfemax-valueRange

Path: cim:ExcAC3A.vfemax
Exciter field current limit reference (Vfemax) (>= 0). Typical value = 16.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC4A

Nested Properties:

dy302c:ExcAC4A.ka-valueRange

Path: cim:ExcAC4A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 200.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.kc-valueRange

Path: cim:ExcAC4A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.ta-valueRange

Path: cim:ExcAC4A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,015.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.tb-valueRange

Path: cim:ExcAC4A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.tc-valueRange

Path: cim:ExcAC4A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.vimax-valueRange

Path: cim:ExcAC4A.vimax
Maximum voltage regulator input limit (Vimax) (> 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.vimin-valueRange

Path: cim:ExcAC4A.vimin
Minimum voltage regulator input limit (Vimin) (< 0). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.vrmax-valueRange

Path: cim:ExcAC4A.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 5,64.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC4A.vrmin-valueRange

Path: cim:ExcAC4A.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = -4,53.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC5A

Nested Properties:

dy302c:ExcAC5A.efd1-valueRange

Path: cim:ExcAC5A.efd1
Exciter voltage at which exciter saturation is defined (Efd1) (> 0). Typical value = 5,6.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.efd2-valueRange

Path: cim:ExcAC5A.efd2
Exciter voltage at which exciter saturation is defined (Efd2) (> 0). Typical value = 4,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.ka-valueRange

Path: cim:ExcAC5A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 400.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.kf-valueRange

Path: cim:ExcAC5A.kf
Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.seefd1-valueRange

Path: cim:ExcAC5A.seefd1
Exciter saturation function value at the corresponding exciter voltage, Efd₁ (Se[Efd₁]) (>= 0). Typical value = 0,86.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.seefd2-valueRange

Path: cim:ExcAC5A.seefd2
Exciter saturation function value at the corresponding exciter voltage, Efd₂ (Se[Efd₂]) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.ta-valueRange

Path: cim:ExcAC5A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.tb-valueRange

Path: cim:ExcAC5A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.tc-valueRange

Path: cim:ExcAC5A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.te-valueRange

Path: cim:ExcAC5A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.tf1-valueRange

Path: cim:ExcAC5A.tf1
Excitation control system stabilizer time constant (Tf1) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.tf2-valueRange

Path: cim:ExcAC5A.tf2
Excitation control system stabilizer time constant (Tf2) (>= 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.tf3-valueRange

Path: cim:ExcAC5A.tf3
Excitation control system stabilizer time constant (Tf3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.vrmax-valueRange

Path: cim:ExcAC5A.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 7,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC5A.vrmin-valueRange

Path: cim:ExcAC5A.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value =-7,3.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC6A

Nested Properties:

dy302c:ExcAC6A.ka-valueRange

Path: cim:ExcAC6A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 536.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.kc-valueRange

Path: cim:ExcAC6A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,173.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.kd-valueRange

Path: cim:ExcAC6A.kd
Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 1,91.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.kh-valueRange

Path: cim:ExcAC6A.kh
Exciter field current limiter gain (Kh) (>= 0). Typical value = 92.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.seve1-valueRange

Path: cim:ExcAC6A.seve1
Exciter saturation function value at the corresponding exciter voltage, Ve₁, back of commutating reactance (Se[Ve₁]) (>= 0). Typical value = 0,214.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.seve2-valueRange

Path: cim:ExcAC6A.seve2
Exciter saturation function value at the corresponding exciter voltage, Ve₂, back of commutating reactance (Se[Ve₂]) (>= 0). Typical value = 0,044.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.ta-valueRange

Path: cim:ExcAC6A.ta
Voltage regulator time constant (Ta) (>= 0). Typical value = 0,086.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.tb-valueRange

Path: cim:ExcAC6A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 9.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.tc-valueRange

Path: cim:ExcAC6A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.te-valueRange

Path: cim:ExcAC6A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.th-valueRange

Path: cim:ExcAC6A.th
Exciter field current limiter time constant (Th) (> 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.tj-valueRange

Path: cim:ExcAC6A.tj
Exciter field current limiter time constant (Tj) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.tk-valueRange

Path: cim:ExcAC6A.tk
Voltage regulator time constant (Tk) (>= 0). Typical value = 0,18.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.vamax-valueRange

Path: cim:ExcAC6A.vamax
Maximum voltage regulator output (Vamax) (> 0). Typical value = 75.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.vamin-valueRange

Path: cim:ExcAC6A.vamin
Minimum voltage regulator output (Vamin) (< 0). Typical value = -75.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.ve1-valueRange

Path: cim:ExcAC6A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₁) (> 0). Typical value = 7,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.ve2-valueRange

Path: cim:ExcAC6A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₂) (> 0). Typical value = 5,55.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.vfelim-valueRange

Path: cim:ExcAC6A.vfelim
Exciter field current limit reference (Vfelim) (> 0). Typical value = 19.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.vhmax-valueRange

Path: cim:ExcAC6A.vhmax
Maximum field current limiter signal reference (Vhmax) (> 0). Typical value = 75.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.vrmax-valueRange

Path: cim:ExcAC6A.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 44.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC6A.vrmin-valueRange

Path: cim:ExcAC6A.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = -36.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAC8B

Nested Properties:

dy302c:ExcAC8B.ka-valueRange

Path: cim:ExcAC8B.ka
Voltage regulator gain (Ka) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.kc-valueRange

Path: cim:ExcAC8B.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,55.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.kd-valueRange

Path: cim:ExcAC8B.kd
Demagnetizing factor, a function of exciter alternator reactances (Kd) (>= 0). Typical value = 1,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.kdr-valueRange

Path: cim:ExcAC8B.kdr
Voltage regulator derivative gain (Kdr) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.kir-valueRange

Path: cim:ExcAC8B.kir
Voltage regulator integral gain (Kir) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.seve1-valueRange

Path: cim:ExcAC8B.seve1
Exciter saturation function value at the corresponding exciter voltage, Ve₁, back of commutating reactance (Se[Ve₁]) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.seve2-valueRange

Path: cim:ExcAC8B.seve2
Exciter saturation function value at the corresponding exciter voltage, Ve₂, back of commutating reactance (Se[Ve₂]) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.ta-valueRange

Path: cim:ExcAC8B.ta
Voltage regulator time constant (Ta) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.tdr-valueRange

Path: cim:ExcAC8B.tdr
Lag time constant (Tdr) (> 0 if ExcAC8B.kdr > 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.te-valueRange

Path: cim:ExcAC8B.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.ve1-valueRange

Path: cim:ExcAC8B.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₁) (> 0). Typical value = 6,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.ve2-valueRange

Path: cim:ExcAC8B.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₂) (> 0). Typical value = 9.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.vemin-valueRange

Path: cim:ExcAC8B.vemin
Minimum exciter voltage output (Vemin) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.vimin-valueRangePair

Path: cim:ExcAC8B.vimin
Input signal minimum (Vimin) (< ExcAC8B.vimax). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcAC8B.vimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcAC8B.vimax

dy302c:ExcAC8B.vpidmin-valueRangePair

Path: cim:ExcAC8B.vpidmin
PID minimum controller output (Vpidmin) (< ExcAC8B.vpidmax). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcAC8B.vpidmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcAC8B.vpidmax

dy302c:ExcAC8B.vrmax-valueRange

Path: cim:ExcAC8B.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 35.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAC8B.vrmin-valueRange

Path: cim:ExcAC8B.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcANS

Severity: sh:Violation

Targets:

• targetClass: cim:ExcANS

Nested Properties:

dy302c:ExcANS.t1-valueRange

Path: cim:ExcANS.t1
Time constant (T₁) (>= 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcANS.t2-valueRange

Path: cim:ExcANS.t2
Time constant (T₂) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcANS.t3-valueRange

Path: cim:ExcANS.t3
Time constant (T₃) (>= 0). Typical value = 1,6.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcANS.tb-valueRange

Path: cim:ExcANS.tb
Exciter time constant (T_B) (>= 0). Typical value = 0,04.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR1

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAVR1

Nested Properties:

dy302c:ExcAVR1.ta-valueRange

Path: cim:ExcAVR1.ta
AVR time constant (T_A) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR1.tb-valueRange

Path: cim:ExcAVR1.tb
AVR time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR1.te-valueRange

Path: cim:ExcAVR1.te
Exciter time constant (T_E) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR1.tf-valueRange

Path: cim:ExcAVR1.tf
Rate feedback time constant (T_F) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR2

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAVR2

Nested Properties:

dy302c:ExcAVR2.ta-valueRange

Path: cim:ExcAVR2.ta
AVR time constant (T_A) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR2.tb-valueRange

Path: cim:ExcAVR2.tb
AVR time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR2.te-valueRange

Path: cim:ExcAVR2.te
Exciter time constant (T_E) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR2.tf1-valueRange

Path: cim:ExcAVR2.tf1
Rate feedback time constant (T_F1) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR2.tf2-valueRange

Path: cim:ExcAVR2.tf2
Rate feedback time constant (T_F2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR3

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAVR3

Nested Properties:

dy302c:ExcAVR3.t1-valueRange

Path: cim:ExcAVR3.t1
AVR time constant (T₁) (>= 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR3.t2-valueRange

Path: cim:ExcAVR3.t2
AVR time constant (T₂) (>= 0). Typical value = 1,6.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR3.t3-valueRange

Path: cim:ExcAVR3.t3
AVR time constant (T₃) (>= 0). Typical value = 0,66.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR3.t4-valueRange

Path: cim:ExcAVR3.t4
AVR time constant (T₄) (>= 0). Typical value = 0,07.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR3.te-valueRange

Path: cim:ExcAVR3.te
Exciter time constant (T_E) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR4

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAVR4

Nested Properties:

dy302c:ExcAVR4.t1-valueRange

Path: cim:ExcAVR4.t1
AVR time constant (T₁) (>= 0). Typical value = 4,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR4.t1if-valueRange

Path: cim:ExcAVR4.t1if
Exciter current feedback time constant (T_1IF) (>= 0). Typical value = 60.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR4.t2-valueRange

Path: cim:ExcAVR4.t2
AVR time constant (T₂) (>= 0). Typical value = 1,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR4.t3-valueRange

Path: cim:ExcAVR4.t3
AVR time constant (T₃) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR4.t4-valueRange

Path: cim:ExcAVR4.t4
AVR time constant (T₄) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR4.tif-valueRange

Path: cim:ExcAVR4.tif
Exciter current feedback time constant (T_IF) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR5

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAVR5

Nested Properties:

dy302c:ExcAVR5.ta-valueRange

Path: cim:ExcAVR5.ta
Time constant (Ta) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7

Severity: sh:Violation

Targets:

• targetClass: cim:ExcAVR7

Nested Properties:

dy302c:ExcAVR7.t1-valueRange

Path: cim:ExcAVR7.t1
Lead time constant (T₁) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7.t2-valueRange

Path: cim:ExcAVR7.t2
Lag time constant (T₂) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7.t3-valueRange

Path: cim:ExcAVR7.t3
Lead time constant (T₃) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7.t4-valueRange

Path: cim:ExcAVR7.t4
Lag time constant (T₄) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7.t5-valueRange

Path: cim:ExcAVR7.t5
Lead time constant (T₅) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7.t6-valueRange

Path: cim:ExcAVR7.t6
Lag time constant (T₆) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcAVR7.vmin1-valueRangePair

Path: cim:ExcAVR7.vmin1
Lead-lag minimum limit (Vmin1) (< ExcAVR7.vmax1). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcAVR7.vmax1."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcAVR7.vmax1

dy302c:ExcAVR7.vmin3-valueRangePair

Path: cim:ExcAVR7.vmin3
Lead-lag minimum limit (Vmin3) (< ExcAVR7.vmax3). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcAVR7.vmax3."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcAVR7.vmax3

dy302c:ExcAVR7.vmin5-valueRangePair

Path: cim:ExcAVR7.vmin5
Lead-lag minimum limit (Vmin5) (< ExcAVR7.vmax5). Typical value = -2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcAVR7.vmax5."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcAVR7.vmax5

dy302c:ExcBBC

Severity: sh:Violation

Targets:

• targetClass: cim:ExcBBC

Nested Properties:

dy302c:ExcBBC.efdmin-valueRangePair

Path: cim:ExcBBC.efdmin
Minimum open circuit exciter voltage (Efdmin) (< ExcBBC.efdmax). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcBBC.efdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcBBC.efdmax

dy302c:ExcBBC.t1-valueRange

Path: cim:ExcBBC.t1
Controller time constant (T1) (>= 0). Typical value = 6.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcBBC.t2-valueRange

Path: cim:ExcBBC.t2
Controller time constant (T2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcBBC.t3-valueRange

Path: cim:ExcBBC.t3
Lead/lag time constant (T3) (>= 0). If = 0, block is bypassed. Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcBBC.t4-valueRange

Path: cim:ExcBBC.t4
Lead/lag time constant (T4) (>= 0). If = 0, block is bypassed. Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcBBC.vrmin-valueRangePair

Path: cim:ExcBBC.vrmin
Minimum control element output (Vrmin) (< ExcBBC.vrmax). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcBBC.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcBBC.vrmax

dy302c:ExcBBC.xe-valueRange

Path: cim:ExcBBC.xe
Effective excitation transformer reactance (Xe) (>= 0). Xe models the regulation of the transformer/rectifier unit. Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcCZ

Severity: sh:Violation

Targets:

• targetClass: cim:ExcCZ

Nested Properties:

dy302c:ExcCZ.efdmin-valueRangePair

Path: cim:ExcCZ.efdmin
Exciter output minimum limit (Efdmin) (< ExcCZ.efdmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcCZ.efdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcCZ.efdmax

dy302c:ExcCZ.ta-valueRange

Path: cim:ExcCZ.ta
Regulator time constant (Ta) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcCZ.tc-valueRange

Path: cim:ExcCZ.tc
Regulator integral time constant (Tc) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcCZ.te-valueRange

Path: cim:ExcCZ.te
Exciter time constant, integration rate associated with exciter control (Te) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcCZ.vrmin-valueRangePair

Path: cim:ExcCZ.vrmin
Voltage regulator minimum limit (Vrmin) (< ExcCZ.vrmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcCZ.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcCZ.vrmax

dy302c:ExcDC1A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcDC1A

Nested Properties:

dy302c:ExcDC1A.efd1-valueRange

Path: cim:ExcDC1A.efd1
Exciter voltage at which exciter saturation is defined (Efd₁) (> 0). Typical value = 3,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.efd2-valueRange

Path: cim:ExcDC1A.efd2
Exciter voltage at which exciter saturation is defined (Efd₂) (> 0). Typical value = 2,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.efdmin-valueRangePair

Path: cim:ExcDC1A.efdmin
Minimum voltage exciter output limiter (Efdmin) (< ExcDC1A.edfmax). Typical value = -99.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcDC1A.edfmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcDC1A.edfmax

dy302c:ExcDC1A.ka-valueRange

Path: cim:ExcDC1A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 46.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.kf-valueRange

Path: cim:ExcDC1A.kf
Excitation control system stabilizer gain (Kf) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.seefd1-valueRange

Path: cim:ExcDC1A.seefd1
Exciter saturation function value at the corresponding exciter voltage, Efd₁ (Se[Eefd₁]) (>= 0). Typical value = 0,33.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.seefd2-valueRange

Path: cim:ExcDC1A.seefd2
Exciter saturation function value at the corresponding exciter voltage, Efd₂ (Se[Eefd₂]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.ta-valueRange

Path: cim:ExcDC1A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,06.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.tb-valueRange

Path: cim:ExcDC1A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.tc-valueRange

Path: cim:ExcDC1A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.te-valueRange

Path: cim:ExcDC1A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,46.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.tf-valueRange

Path: cim:ExcDC1A.tf
Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC1A.vrmin-valueRangePair

Path: cim:ExcDC1A.vrmin
Minimum voltage regulator output (Vrmin) (< 0 and < ExcDC1A.vrmax). Typical value = -0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcDC1A.vrmax; or positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcDC1A.vrmax

dy302c:ExcDC2A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcDC2A

Nested Properties:

dy302c:ExcDC2A.efd1-valueRange

Path: cim:ExcDC2A.efd1
Exciter voltage at which exciter saturation is defined (Efd₁) (> 0). Typical value = 3,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.efd2-valueRange

Path: cim:ExcDC2A.efd2
Exciter voltage at which exciter saturation is defined (Efd₂) (> 0). Typical value = 2,29.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.ka-valueRange

Path: cim:ExcDC2A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 300.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.kf-valueRange

Path: cim:ExcDC2A.kf
Excitation control system stabilizer gain (Kf) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.seefd1-valueRange

Path: cim:ExcDC2A.seefd1
Exciter saturation function value at the corresponding exciter voltage, Efd₁ (Se[Efd₁]) (>= 0). Typical value = 0,279.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.seefd2-valueRange

Path: cim:ExcDC2A.seefd2
Exciter saturation function value at the corresponding exciter voltage, Efd₂ (Se[Efd₂]) (>= 0). Typical value = 0,117.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.ta-valueRange

Path: cim:ExcDC2A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.tb-valueRange

Path: cim:ExcDC2A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.tc-valueRange

Path: cim:ExcDC2A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.te-valueRange

Path: cim:ExcDC2A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,33.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.tf-valueRange

Path: cim:ExcDC2A.tf
Excitation control system stabilizer time constant (Tf) (> 0). Typical value = 0,675.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.tf1-valueRange

Path: cim:ExcDC2A.tf1
Excitation control system stabilizer time constant (Tf1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC2A.vrmin-valueRangePair

Path: cim:ExcDC2A.vrmin
Minimum voltage regulator output (Vrmin) (< 0 and < ExcDC2A.vrmax). Typical value = -4,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcDC2A.vrmax; or positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcDC2A.vrmax

dy302c:ExcDC3A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcDC3A

Nested Properties:

dy302c:ExcDC3A.efd1-valueRange

Path: cim:ExcDC3A.efd1
Exciter voltage at which exciter saturation is defined (Efd₁) (> 0). Typical value = 2,6.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.efd2-valueRange

Path: cim:ExcDC3A.efd2
Exciter voltage at which exciter saturation is defined (Efd₂) (> 0). Typical value = 3,45.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.efdmin-valueRangePair

Path: cim:ExcDC3A.efdmin
Minimum voltage exciter output limiter (Efdmin) (< ExcDC3A.efdmax). Typical value = -99.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcDC3A.efdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcDC3A.efdmax

dy302c:ExcDC3A.kv-valueRange

Path: cim:ExcDC3A.kv
Fast raise/lower contact setting (Kv) (> 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.seefd1-valueRange

Path: cim:ExcDC3A.seefd1
Exciter saturation function value at the corresponding exciter voltage, Efd₁ (Se[Efd₁]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.seefd2-valueRange

Path: cim:ExcDC3A.seefd2
Exciter saturation function value at the corresponding exciter voltage, Efd₂ (Se[Efd₂]) (>= 0). Typical value = 0,35.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.te-valueRange

Path: cim:ExcDC3A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,83.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.trh-valueRange

Path: cim:ExcDC3A.trh
Rheostat travel time (Trh) (> 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.vrmax-valueRange

Path: cim:ExcDC3A.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A.vrmin-valueRange

Path: cim:ExcDC3A.vrmin
Minimum voltage regulator output (Vrmin) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1

Severity: sh:Violation

Targets:

• targetClass: cim:ExcDC3A1

Nested Properties:

dy302c:ExcDC3A1.ka-valueRange

Path: cim:ExcDC3A1.ka
Voltage regulator gain (Ka) (> 0). Typical value = 300.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.kf-valueRange

Path: cim:ExcDC3A1.kf
Excitation control system stabilizer gain (Kf) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.ki-valueRange

Path: cim:ExcDC3A1.ki
Potential circuit gain coefficient (Ki) (>= 0). Typical value = 4,83.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.kp-valueRange

Path: cim:ExcDC3A1.kp
Potential circuit gain coefficient (Kp) (>= 0). Typical value = 4,37.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.ta-valueRange

Path: cim:ExcDC3A1.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.te-valueRange

Path: cim:ExcDC3A1.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 1,83.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.tf-valueRange

Path: cim:ExcDC3A1.tf
Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 0,675.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.vb1max-valueRange

Path: cim:ExcDC3A1.vb1max
Available exciter voltage limiter (Vb1max) (> 0). Typical value = 11,63.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.vbmax-valueRange

Path: cim:ExcDC3A1.vbmax
Available exciter voltage limiter (Vbmax) (> 0). Typical value = 11,63.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcDC3A1.vrmin-valueRangePair

Path: cim:ExcDC3A1.vrmin
Minimum voltage regulator output (Vrmin) (< 0 and < ExcDC3A1.vrmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcDC3A1.vrmax; or positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcDC3A1.vrmax

dy302c:ExcELIN1

Severity: sh:Violation

Targets:

• targetClass: cim:ExcELIN1

Nested Properties:

dy302c:ExcELIN1.efmin-valueRangePair

Path: cim:ExcELIN1.efmin
Minimum open circuit excitation voltage (Efmin) (< ExcELIN1.efmax). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcELIN1.efmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcELIN1.efmax

dy302c:ExcELIN1.tfi-valueRange

Path: cim:ExcELIN1.tfi
Current transducer time constant (Tfi) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN1.tnu-valueRange

Path: cim:ExcELIN1.tnu
Controller reset time constant (Tnu) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN1.ts1-valueRange

Path: cim:ExcELIN1.ts1
Stabilizer phase lag time constant (Ts1) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN1.ts2-valueRange

Path: cim:ExcELIN1.ts2
Stabilizer filter time constant (Ts2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN1.tsw-valueRange

Path: cim:ExcELIN1.tsw
Stabilizer parameters (Tsw) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN1.xe-valueRange

Path: cim:ExcELIN1.xe
Excitation transformer effective reactance (Xe) (>= 0). Xe represents the regulation of the transformer/rectifier unit. Typical value = 0,06.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2

Severity: sh:Violation

Targets:

• targetClass: cim:ExcELIN2

Nested Properties:

dy302c:ExcELIN2.iefmin-valueRangePair

Path: cim:ExcELIN2.iefmin
Limiter (I_efmin) (< ExcELIN2.iefmax). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcELIN2.iefmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcELIN2.iefmax

dy302c:ExcELIN2.seve1-valueRange

Path: cim:ExcELIN2.seve1
Exciter saturation function value at the corresponding exciter voltage, Ve₁, back of commutating reactance (Se[Ve₁]) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.seve2-valueRange

Path: cim:ExcELIN2.seve2
Exciter saturation function value at the corresponding exciter voltage, Ve₂, back of commutating reactance (Se[Ve₂]) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.tb1-valueRange

Path: cim:ExcELIN2.tb1
Voltage controller derivative washout time constant (Tb1) (>= 0). Typical value = 12,45.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.te-valueRange

Path: cim:ExcELIN2.te
Time constant (Te) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.te2-valueRange

Path: cim:ExcELIN2.te2
Time Constant (T_e2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.ti3-valueRange

Path: cim:ExcELIN2.ti3
Time constant (T_i3) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.ti4-valueRange

Path: cim:ExcELIN2.ti4
Time constant (T_i4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.tr4-valueRange

Path: cim:ExcELIN2.tr4
Time constant (T_r4) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.upmin-valueRangePair

Path: cim:ExcELIN2.upmin
Limiter (Upmin) (< ExcELIN2.upmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcELIN2.upmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcELIN2.upmax

dy302c:ExcELIN2.ve1-valueRange

Path: cim:ExcELIN2.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₁) (> 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcELIN2.ve2-valueRange

Path: cim:ExcELIN2.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (Ve₂) (> 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcHU

Severity: sh:Violation

Targets:

• targetClass: cim:ExcHU

Nested Properties:

dy302c:ExcHU.emin-valueRangePair

Path: cim:ExcHU.emin
Field voltage control signal lower limit on AVR base (Emin) (< ExcHU.emax). Typical value = -0,866.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcHU.emax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcHU.emax

dy302c:ExcHU.imin-valueRangePair

Path: cim:ExcHU.imin
Major loop PI tag output signal lower limit (Imin) (< ExcHU.imax). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcBBC.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcHU.imax

dy302c:ExcHU.te-valueRange

Path: cim:ExcHU.te
Major loop PI tag integration time constant (Te) (>= 0). Typical value = 0,154.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcHU.ti-valueRange

Path: cim:ExcHU.ti
Minor loop PI control tag integration time constant (Ti) (>= 0). Typical value = 0,01333.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcHU.tr-valueRange

Path: cim:ExcHU.tr
Filter time constant (Tr) (>= 0). If a voltage compensator is used in conjunction with this excitation system model, Tr should be set to 0. Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC1A

Nested Properties:

dy302c:ExcIEEEAC1A.ka-valueRange

Path: cim:ExcIEEEAC1A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 400.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.kc-valueRange

Path: cim:ExcIEEEAC1A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.kd-valueRange

Path: cim:ExcIEEEAC1A.kd
Demagnetizing factor, a function of exciter alternator reactances (K_D) (>= 0). Typical value = 0,38.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.kf-valueRange

Path: cim:ExcIEEEAC1A.kf
Excitation control system stabilizer gains (K_F) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.seve1-valueRange

Path: cim:ExcIEEEAC1A.seve1
Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.seve2-valueRange

Path: cim:ExcIEEEAC1A.seve2
Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.ta-valueRange

Path: cim:ExcIEEEAC1A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.tb-valueRange

Path: cim:ExcIEEEAC1A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.tc-valueRange

Path: cim:ExcIEEEAC1A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.te-valueRange

Path: cim:ExcIEEEAC1A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.tf-valueRange

Path: cim:ExcIEEEAC1A.tf
Excitation control system stabilizer time constant (T_F) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.vamax-valueRange

Path: cim:ExcIEEEAC1A.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 14,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.vamin-valueRange

Path: cim:ExcIEEEAC1A.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -14,5.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.ve1-valueRange

Path: cim:ExcIEEEAC1A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) (> 0). Typical value = 4,18.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.ve2-valueRange

Path: cim:ExcIEEEAC1A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2) (> 0). Typical value = 3,14.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.vrmax-valueRange

Path: cim:ExcIEEEAC1A.vrmax
Maximum voltage regulator outputs (V_RMAX) (> 0). Typical value = 6,03.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC1A.vrmin-valueRange

Path: cim:ExcIEEEAC1A.vrmin
Minimum voltage regulator outputs (V_RMIN) (< 0). Typical value = -5,43.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC2A

Nested Properties:

dy302c:ExcIEEEAC2A.ka-valueRange

Path: cim:ExcIEEEAC2A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 400.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.kb-valueRange

Path: cim:ExcIEEEAC2A.kb
Second stage regulator gain (K_B) (> 0). Typical value = 25.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.kc-valueRange

Path: cim:ExcIEEEAC2A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,28.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.kd-valueRange

Path: cim:ExcIEEEAC2A.kd
Demagnetizing factor, a function of exciter alternator reactances (K_D) (>= 0). Typical value = 0,35.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.ke-valueRange

Path: cim:ExcIEEEAC2A.ke
Exciter constant related to self-excited field (K_E) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.kf-valueRange

Path: cim:ExcIEEEAC2A.kf
Excitation control system stabilizer gains (K_F) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.kh-valueRange

Path: cim:ExcIEEEAC2A.kh
Exciter field current feedback gain (K_H) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.seve1-valueRange

Path: cim:ExcIEEEAC2A.seve1
Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]) (>= 0). Typical value = 0,037.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.seve2-valueRange

Path: cim:ExcIEEEAC2A.seve2
Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]) (>= 0). Typical value = 0,012.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.ta-valueRange

Path: cim:ExcIEEEAC2A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.tb-valueRange

Path: cim:ExcIEEEAC2A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.tc-valueRange

Path: cim:ExcIEEEAC2A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.te-valueRange

Path: cim:ExcIEEEAC2A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,6.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.tf-valueRange

Path: cim:ExcIEEEAC2A.tf
Excitation control system stabilizer time constant (T_F) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.vamax-valueRange

Path: cim:ExcIEEEAC2A.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.vamin-valueRange

Path: cim:ExcIEEEAC2A.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -8.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.ve1-valueRange

Path: cim:ExcIEEEAC2A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) (> 0). Typical value = 4,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.ve2-valueRange

Path: cim:ExcIEEEAC2A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2) (> 0). Typical value = 3,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.vfemax-valueRange

Path: cim:ExcIEEEAC2A.vfemax
Exciter field current limit reference (V_FEMAX) (> 0). Typical value = 4,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.vrmax-valueRange

Path: cim:ExcIEEEAC2A.vrmax
Maximum voltage regulator outputs (V_RMAX) (> 0). Typical value = 105.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC2A.vrmin-valueRange

Path: cim:ExcIEEEAC2A.vrmin
Minimum voltage regulator outputs (V_RMIN) (< 0). Typical value = -95.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC3A

Nested Properties:

dy302c:ExcIEEEAC3A.efdn-valueRange

Path: cim:ExcIEEEAC3A.efdn
Value of Efd at which feedback gain changes (E_FDN) (> 0). Typical value = 2,36.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.ka-valueRange

Path: cim:ExcIEEEAC3A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 45,62.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.kc-valueRange

Path: cim:ExcIEEEAC3A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,104.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.kd-valueRange

Path: cim:ExcIEEEAC3A.kd
Demagnetizing factor, a function of exciter alternator reactances (K_D) (>= 0). Typical value = 0,499.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.kf-valueRange

Path: cim:ExcIEEEAC3A.kf
Excitation control system stabilizer gains (K_F) (>= 0). Typical value = 0,143.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.kn-valueRange

Path: cim:ExcIEEEAC3A.kn
Excitation control system stabilizer gain (K_N) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.kr-valueRange

Path: cim:ExcIEEEAC3A.kr
Constant associated with regulator and alternator field power supply (K_R) (> 0). Typical value = 3,77.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.seve1-valueRange

Path: cim:ExcIEEEAC3A.seve1
Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]) (>= 0). Typical value = 1,143.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.seve2-valueRange

Path: cim:ExcIEEEAC3A.seve2
Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.ta-valueRange

Path: cim:ExcIEEEAC3A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,013.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.tb-valueRange

Path: cim:ExcIEEEAC3A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.tc-valueRange

Path: cim:ExcIEEEAC3A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.te-valueRange

Path: cim:ExcIEEEAC3A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 1,17.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.tf-valueRange

Path: cim:ExcIEEEAC3A.tf
Excitation control system stabilizer time constant (T_F) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.vamax-valueRange

Path: cim:ExcIEEEAC3A.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.vamin-valueRange

Path: cim:ExcIEEEAC3A.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -0,95.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.ve1-valueRange

Path: cim:ExcIEEEAC3A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) (> 0). Typical value = 6,24.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.ve2-valueRange

Path: cim:ExcIEEEAC3A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2) (> 0). Typical value = 4,68.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.vemin-valueRange

Path: cim:ExcIEEEAC3A.vemin
Minimum exciter voltage output (V_EMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC3A.vfemax-valueRange

Path: cim:ExcIEEEAC3A.vfemax
Exciter field current limit reference (V_FEMAX) (>= 0). Typical value = 16.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC4A

Nested Properties:

dy302c:ExcIEEEAC4A.ka-valueRange

Path: cim:ExcIEEEAC4A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 200.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.kc-valueRange

Path: cim:ExcIEEEAC4A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.ta-valueRange

Path: cim:ExcIEEEAC4A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,015.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.tb-valueRange

Path: cim:ExcIEEEAC4A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.tc-valueRange

Path: cim:ExcIEEEAC4A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.vimax-valueRange

Path: cim:ExcIEEEAC4A.vimax
Maximum voltage regulator input limit (V_IMAX) (> 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.vimin-valueRange

Path: cim:ExcIEEEAC4A.vimin
Minimum voltage regulator input limit (V_IMIN) (< 0). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.vrmax-valueRange

Path: cim:ExcIEEEAC4A.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 5,64.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC4A.vrmin-valueRange

Path: cim:ExcIEEEAC4A.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -4,53.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC5A

Nested Properties:

dy302c:ExcIEEEAC5A.efd1-valueRange

Path: cim:ExcIEEEAC5A.efd1
Exciter voltage at which exciter saturation is defined (E_FD1) (> 0). Typical value = 5,6.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.efd2-valueRange

Path: cim:ExcIEEEAC5A.efd2
Exciter voltage at which exciter saturation is defined (E_FD2) (> 0). Typical value = 4,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.ka-valueRange

Path: cim:ExcIEEEAC5A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 400.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.kf-valueRange

Path: cim:ExcIEEEAC5A.kf
Excitation control system stabilizer gains (K_F) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.seefd1-valueRange

Path: cim:ExcIEEEAC5A.seefd1
Exciter saturation function value at the corresponding exciter voltage, E_FD1 (S_E[E_FD1]) (>= 0). Typical value = 0,86.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.seefd2-valueRange

Path: cim:ExcIEEEAC5A.seefd2
Exciter saturation function value at the corresponding exciter voltage, E_FD2 (S_E[E_FD2]) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.ta-valueRange

Path: cim:ExcIEEEAC5A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.te-valueRange

Path: cim:ExcIEEEAC5A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.tf1-valueRange

Path: cim:ExcIEEEAC5A.tf1
Excitation control system stabilizer time constant (T_F1) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.tf2-valueRange

Path: cim:ExcIEEEAC5A.tf2
Excitation control system stabilizer time constant (T_F2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.tf3-valueRange

Path: cim:ExcIEEEAC5A.tf3
Excitation control system stabilizer time constant (T_F3) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.vrmax-valueRange

Path: cim:ExcIEEEAC5A.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 7,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC5A.vrmin-valueRange

Path: cim:ExcIEEEAC5A.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -7,3.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC6A

Nested Properties:

dy302c:ExcIEEEAC6A.ka-valueRange

Path: cim:ExcIEEEAC6A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 536.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.kc-valueRange

Path: cim:ExcIEEEAC6A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,173.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.kd-valueRange

Path: cim:ExcIEEEAC6A.kd
Demagnetizing factor, a function of exciter alternator reactances (K_D) (>= 0). Typical value = 1,91.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.kh-valueRange

Path: cim:ExcIEEEAC6A.kh
Exciter field current limiter gain (K_H) (>= 0). Typical value = 92.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.seve1-valueRange

Path: cim:ExcIEEEAC6A.seve1
Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]) (>= 0). Typical value = 0,214.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.seve2-valueRange

Path: cim:ExcIEEEAC6A.seve2
Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]) (>= 0). Typical value = 0,044.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.ta-valueRange

Path: cim:ExcIEEEAC6A.ta
Voltage regulator time constant (T_A) (>= 0). Typical value = 0,086.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.tb-valueRange

Path: cim:ExcIEEEAC6A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 9.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.tc-valueRange

Path: cim:ExcIEEEAC6A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.te-valueRange

Path: cim:ExcIEEEAC6A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.th-valueRange

Path: cim:ExcIEEEAC6A.th
Exciter field current limiter time constant (T_H) (> 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.tj-valueRange

Path: cim:ExcIEEEAC6A.tj
Exciter field current limiter time constant (T_J) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.tk-valueRange

Path: cim:ExcIEEEAC6A.tk
Voltage regulator time constant (T_K) (>= 0). Typical value = 0,18.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.vamax-valueRange

Path: cim:ExcIEEEAC6A.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 75.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.vamin-valueRange

Path: cim:ExcIEEEAC6A.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -75.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.ve1-valueRange

Path: cim:ExcIEEEAC6A.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) (> 0). Typical value = 7,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.ve2-valueRange

Path: cim:ExcIEEEAC6A.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2) (> 0). Typical value = 5,55.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.vfelim-valueRange

Path: cim:ExcIEEEAC6A.vfelim
Exciter field current limit reference (V_FELIM) (> 0). Typical value = 19.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.vhmax-valueRange

Path: cim:ExcIEEEAC6A.vhmax
Maximum field current limiter signal reference (V_HMAX) (> 0). Typical value = 75.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.vrmax-valueRange

Path: cim:ExcIEEEAC6A.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 44.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC6A.vrmin-valueRange

Path: cim:ExcIEEEAC6A.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -36.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC7B

Nested Properties:

dy302c:ExcIEEEAC7B.kc-valueRange

Path: cim:ExcIEEEAC7B.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,18.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kd-valueRange

Path: cim:ExcIEEEAC7B.kd
Demagnetizing factor, a function of exciter alternator reactances (K_D) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kdr-valueRange

Path: cim:ExcIEEEAC7B.kdr
Voltage regulator derivative gain (K_DR) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kf1-valueRange

Path: cim:ExcIEEEAC7B.kf1
Excitation control system stabilizer gain (K_F1) (>= 0). Typical value = 0,212.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kf2-valueRange

Path: cim:ExcIEEEAC7B.kf2
Excitation control system stabilizer gain (K_F2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kf3-valueRange

Path: cim:ExcIEEEAC7B.kf3
Excitation control system stabilizer gain (K_F3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kia-valueRange

Path: cim:ExcIEEEAC7B.kia
Voltage regulator integral gain (K_IA) (>= 0). Typical value = 59,69.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kir-valueRange

Path: cim:ExcIEEEAC7B.kir
Voltage regulator integral gain (K_IR) (>= 0). Typical value = 4,24.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.kp-valueRange

Path: cim:ExcIEEEAC7B.kp
Potential circuit gain coefficient (K_P) (> 0). Typical value = 4,96.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.seve1-valueRange

Path: cim:ExcIEEEAC7B.seve1
Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]) (>= 0). Typical value = 0,44.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.seve2-valueRange

Path: cim:ExcIEEEAC7B.seve2
Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]) (>= 0). Typical value = 0,075.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.tdr-valueRange

Path: cim:ExcIEEEAC7B.tdr
Lag time constant (T_DR) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.te-valueRange

Path: cim:ExcIEEEAC7B.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 1,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.tf-valueRange

Path: cim:ExcIEEEAC7B.tf
Excitation control system stabilizer time constant (T_F) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.vamax-valueRange

Path: cim:ExcIEEEAC7B.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.vamin-valueRange

Path: cim:ExcIEEEAC7B.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -0,95.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.ve1-valueRange

Path: cim:ExcIEEEAC7B.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) (> 0). Typical value = 6,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.ve2-valueRange

Path: cim:ExcIEEEAC7B.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2) (> 0). Typical value = 3,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.vemin-valueRange

Path: cim:ExcIEEEAC7B.vemin
Minimum exciter voltage output (V_EMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.vrmax-valueRange

Path: cim:ExcIEEEAC7B.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 5,79.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC7B.vrmin-valueRange

Path: cim:ExcIEEEAC7B.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -5,79.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEAC8B

Nested Properties:

dy302c:ExcIEEEAC8B.ka-valueRange

Path: cim:ExcIEEEAC8B.ka
Voltage regulator gain (K_A) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.kc-valueRange

Path: cim:ExcIEEEAC8B.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,55.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.kd-valueRange

Path: cim:ExcIEEEAC8B.kd
Demagnetizing factor, a function of exciter alternator reactances (K_D) (>= 0). Typical value = 1,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.kdr-valueRange

Path: cim:ExcIEEEAC8B.kdr
Voltage regulator derivative gain (K_DR) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.kir-valueRange

Path: cim:ExcIEEEAC8B.kir
Voltage regulator integral gain (K_IR) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.seve1-valueRange

Path: cim:ExcIEEEAC8B.seve1
Exciter saturation function value at the corresponding exciter voltage, V_E1, back of commutating reactance (S_E[V_E1]) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.seve2-valueRange

Path: cim:ExcIEEEAC8B.seve2
Exciter saturation function value at the corresponding exciter voltage, V_E2, back of commutating reactance (S_E[V_E2]) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.ta-valueRange

Path: cim:ExcIEEEAC8B.ta
Voltage regulator time constant (T_A) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.tdr-valueRange

Path: cim:ExcIEEEAC8B.tdr
Lag time constant (T_DR) (> 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.te-valueRange

Path: cim:ExcIEEEAC8B.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 1,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.ve1-valueRange

Path: cim:ExcIEEEAC8B.ve1
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E1) (> 0). Typical value = 6,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.ve2-valueRange

Path: cim:ExcIEEEAC8B.ve2
Exciter alternator output voltages back of commutating reactance at which saturation is defined (V_E2) (> 0). Typical value = 9.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.vemin-valueRange

Path: cim:ExcIEEEAC8B.vemin
Minimum exciter voltage output (V_EMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.vrmax-valueRange

Path: cim:ExcIEEEAC8B.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 35.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEAC8B.vrmin-valueRange

Path: cim:ExcIEEEAC8B.vrmin
Minimum voltage regulator output (V_RMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEDC1A

Nested Properties:

dy302c:ExcIEEEDC1A.efd1-valueRange

Path: cim:ExcIEEEDC1A.efd1
Exciter voltage at which exciter saturation is defined (E_FD1) (> 0). Typical value = 3,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.efd2-valueRange

Path: cim:ExcIEEEDC1A.efd2
Exciter voltage at which exciter saturation is defined (E_FD2) (> 0). Typical value = 2,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.ka-valueRange

Path: cim:ExcIEEEDC1A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 46.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.kf-valueRange

Path: cim:ExcIEEEDC1A.kf
Excitation control system stabilizer gain (K_F) (>= 0). Typical value = 0.1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.seefd1-valueRange

Path: cim:ExcIEEEDC1A.seefd1
Exciter saturation function value at the corresponding exciter voltage, E_FD1 (S_E[E_FD1]) (>= 0). Typical value = 0.33.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.seefd2-valueRange

Path: cim:ExcIEEEDC1A.seefd2
Exciter saturation function value at the corresponding exciter voltage, E_FD2 (S_E[E_FD2]) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.ta-valueRange

Path: cim:ExcIEEEDC1A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,06.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.tb-valueRange

Path: cim:ExcIEEEDC1A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.tc-valueRange

Path: cim:ExcIEEEDC1A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.te-valueRange

Path: cim:ExcIEEEDC1A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,46.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.tf-valueRange

Path: cim:ExcIEEEDC1A.tf
Excitation control system stabilizer time constant (T_F) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC1A.vrmin-valueRangePair

Path: cim:ExcIEEEDC1A.vrmin
Minimum voltage regulator output (V_RMIN) (< 0 and < ExcIEEEDC1A.vrmax). Typical value = -0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcIEEEDC1A.vrmax; or positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcIEEEDC1A.vrmax

dy302c:ExcIEEEDC2A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEDC2A

Nested Properties:

dy302c:ExcIEEEDC2A.efd1-valueRange

Path: cim:ExcIEEEDC2A.efd1
Exciter voltage at which exciter saturation is defined (E_FD1) (> 0). Typical value = 3,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.efd2-valueRange

Path: cim:ExcIEEEDC2A.efd2
Exciter voltage at which exciter saturation is defined (E_FD2) (> 0). Typical value = 2,29.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.ka-valueRange

Path: cim:ExcIEEEDC2A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 300.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.kf-valueRange

Path: cim:ExcIEEEDC2A.kf
Excitation control system stabilizer gain (K_F) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.seefd1-valueRange

Path: cim:ExcIEEEDC2A.seefd1
Exciter saturation function value at the corresponding exciter voltage, E_FD1 (S_E[E_FD1]) (>= 0). Typical value = 0,279.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.seefd2-valueRange

Path: cim:ExcIEEEDC2A.seefd2
Exciter saturation function value at the corresponding exciter voltage, E_FD2 (S_E[E_FD2]) (>= 0). Typical value = 0,117.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.ta-valueRange

Path: cim:ExcIEEEDC2A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.tb-valueRange

Path: cim:ExcIEEEDC2A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.tc-valueRange

Path: cim:ExcIEEEDC2A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.te-valueRange

Path: cim:ExcIEEEDC2A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 1,33.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.tf-valueRange

Path: cim:ExcIEEEDC2A.tf
Excitation control system stabilizer time constant (T_F) (> 0). Typical value = 0,675.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC2A.vrmin-valueRangePair

Path: cim:ExcIEEEDC2A.vrmin
Minimum voltage regulator output (V_RMIN) (< 0 and < ExcIEEEDC2A.vrmax). Typical value = -4,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcIEEEDC2A.vrmax; or positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcIEEEDC2A.vrmax

dy302c:ExcIEEEDC3A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEDC3A

Nested Properties:

dy302c:ExcIEEEDC3A.efd1-valueRange

Path: cim:ExcIEEEDC3A.efd1
Exciter voltage at which exciter saturation is defined (E_FD1) (> 0). Typical value = 3,375.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.efd2-valueRange

Path: cim:ExcIEEEDC3A.efd2
Exciter voltage at which exciter saturation is defined (E_FD2) (> 0). Typical value = 3,15.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.kv-valueRange

Path: cim:ExcIEEEDC3A.kv
Fast raise/lower contact setting (K_V) (> 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.seefd1-valueRange

Path: cim:ExcIEEEDC3A.seefd1
Exciter saturation function value at the corresponding exciter voltage, E_FD1 (S_E[E_FD1]) (>= 0). Typical value = 0,267.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.seefd2-valueRange

Path: cim:ExcIEEEDC3A.seefd2
Exciter saturation function value at the corresponding exciter voltage, E_FD2 (S_E[E_FD2]) (>= 0). Typical value = 0,068.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.te-valueRange

Path: cim:ExcIEEEDC3A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.trh-valueRange

Path: cim:ExcIEEEDC3A.trh
Rheostat travel time (T_RH) (> 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.vrmax-valueRange

Path: cim:ExcIEEEDC3A.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC3A.vrmin-valueRange

Path: cim:ExcIEEEDC3A.vrmin
Minimum voltage regulator output (V_RMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEDC4B

Nested Properties:

dy302c:ExcIEEEDC4B.efd1-valueRange

Path: cim:ExcIEEEDC4B.efd1
Exciter voltage at which exciter saturation is defined (E_FD1) (> 0). Typical value = 1,75.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.efd2-valueRange

Path: cim:ExcIEEEDC4B.efd2
Exciter voltage at which exciter saturation is defined (E_FD2) (> 0). Typical value = 2,33.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.ka-valueRange

Path: cim:ExcIEEEDC4B.ka
Voltage regulator gain (K_A) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.kd-valueRange

Path: cim:ExcIEEEDC4B.kd
Regulator derivative gain (K_D) (>= 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.kf-valueRange

Path: cim:ExcIEEEDC4B.kf
Excitation control system stabilizer gain (K_F) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.ki-valueRange

Path: cim:ExcIEEEDC4B.ki
Regulator integral gain (K_I) (>= 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.kp-valueRange

Path: cim:ExcIEEEDC4B.kp
Regulator proportional gain (K_P) (>= 0). Typical value = 20.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.seefd1-valueRange

Path: cim:ExcIEEEDC4B.seefd1
Exciter saturation function value at the corresponding exciter voltage, E_FD1 (S_E[E_FD1]) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.seefd2-valueRange

Path: cim:ExcIEEEDC4B.seefd2
Exciter saturation function value at the corresponding exciter voltage, E_FD2 (S_E[E_FD2]) (>= 0). Typical value = 0,27.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.ta-valueRange

Path: cim:ExcIEEEDC4B.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.te-valueRange

Path: cim:ExcIEEEDC4B.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.tf-valueRange

Path: cim:ExcIEEEDC4B.tf
Excitation control system stabilizer time constant (T_F) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.vemin-valueRange

Path: cim:ExcIEEEDC4B.vemin
Minimum exciter voltage output (V_EMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEDC4B.vrmin-valueRangePair

Path: cim:ExcIEEEDC4B.vrmin
Minimum voltage regulator output (V_RMIN) (<= 0 and < ExcIEEEDC4B.vrmax). Typical value = -0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcIEEEDC4B.vrmax; or positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcIEEEDC4B.vrmax

dy302c:ExcIEEEST1A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST1A

Nested Properties:

dy302c:ExcIEEEST1A.ka-valueRange

Path: cim:ExcIEEEST1A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 190.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.kc-valueRange

Path: cim:ExcIEEEST1A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.kf-valueRange

Path: cim:ExcIEEEST1A.kf
Excitation control system stabilizer gains (K_F) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.ta-valueRange

Path: cim:ExcIEEEST1A.ta
Voltage regulator time constant (T_A) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.tb-valueRange

Path: cim:ExcIEEEST1A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.tb1-valueRange

Path: cim:ExcIEEEST1A.tb1
Voltage regulator time constant (T_B1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.tc-valueRange

Path: cim:ExcIEEEST1A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.tc1-valueRange

Path: cim:ExcIEEEST1A.tc1
Voltage regulator time constant (T_C1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.tf-valueRange

Path: cim:ExcIEEEST1A.tf
Excitation control system stabilizer time constant (T_F) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.vamax-valueRange

Path: cim:ExcIEEEST1A.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 14,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.vamin-valueRange

Path: cim:ExcIEEEST1A.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -14,5.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.vimax-valueRange

Path: cim:ExcIEEEST1A.vimax
Maximum voltage regulator input limit (V_IMAX) (> 0). Typical value = 999.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.vimin-valueRange

Path: cim:ExcIEEEST1A.vimin
Minimum voltage regulator input limit (V_IMIN) (< 0). Typical value = -999.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.vrmax-valueRange

Path: cim:ExcIEEEST1A.vrmax
Maximum voltage regulator outputs (V_RMAX) (> 0). Typical value = 7,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST1A.vrmin-valueRange

Path: cim:ExcIEEEST1A.vrmin
Minimum voltage regulator outputs (V_RMIN) (< 0). Typical value = -6,7.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST2A

Nested Properties:

dy302c:ExcIEEEST2A.efdmax-valueRange

Path: cim:ExcIEEEST2A.efdmax
Maximum field voltage (E_FDMax) (>= 0). Typical value = 99.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.ka-valueRange

Path: cim:ExcIEEEST2A.ka
Voltage regulator gain (K_A) (> 0). Typical value = 120.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.kc-valueRange

Path: cim:ExcIEEEST2A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 1,82.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.kf-valueRange

Path: cim:ExcIEEEST2A.kf
Excitation control system stabilizer gains (K_F) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.ki-valueRange

Path: cim:ExcIEEEST2A.ki
Potential circuit gain coefficient (K_I) (>= 0). Typical value = 8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.kp-valueRange

Path: cim:ExcIEEEST2A.kp
Potential circuit gain coefficient (K_P) (>= 0). Typical value = 4,88.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.ta-valueRange

Path: cim:ExcIEEEST2A.ta
Voltage regulator time constant (T_A) (> 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.te-valueRange

Path: cim:ExcIEEEST2A.te
Exciter time constant, integration rate associated with exciter control (T_E) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.tf-valueRange

Path: cim:ExcIEEEST2A.tf
Excitation control system stabilizer time constant (T_F) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.vrmax-valueRange

Path: cim:ExcIEEEST2A.vrmax
Maximum voltage regulator outputs (V_RMAX) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST2A.vrmin-valueRange

Path: cim:ExcIEEEST2A.vrmin
Minimum voltage regulator outputs (V_RMIN) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST3A

Nested Properties:

dy302c:ExcIEEEST3A.ka-valueRange

Path: cim:ExcIEEEST3A.ka
Voltage regulator gain (K_A) (> 0). This is parameter K in the IEEE standard. Typical value = 200.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.kc-valueRange

Path: cim:ExcIEEEST3A.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.kg-valueRange

Path: cim:ExcIEEEST3A.kg
Feedback gain constant of the inner loop field regulator (K_G) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.ki-valueRange

Path: cim:ExcIEEEST3A.ki
Potential circuit gain coefficient (K_I) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.km-valueRange

Path: cim:ExcIEEEST3A.km
Forward gain constant of the inner loop field regulator (K_M) (> 0). Typical value = 7,93.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.kp-valueRange

Path: cim:ExcIEEEST3A.kp
Potential circuit gain coefficient (K_P) (> 0). Typical value = 6,15.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.ta-valueRange

Path: cim:ExcIEEEST3A.ta
Voltage regulator time constant (T_A) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.tb-valueRange

Path: cim:ExcIEEEST3A.tb
Voltage regulator time constant (T_B) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.tc-valueRange

Path: cim:ExcIEEEST3A.tc
Voltage regulator time constant (T_C) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.tm-valueRange

Path: cim:ExcIEEEST3A.tm
Forward time constant of inner loop field regulator (T_M) (> 0). Typical value = 0,4.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vbmax-valueRange

Path: cim:ExcIEEEST3A.vbmax
Maximum excitation voltage (V_BMax) (> 0). Typical value = 6,9.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vgmax-valueRange

Path: cim:ExcIEEEST3A.vgmax
Maximum inner loop feedback voltage (V_GMax) (>= 0). Typical value = 5,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vimax-valueRange

Path: cim:ExcIEEEST3A.vimax
Maximum voltage regulator input limit (V_IMAX) (> 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vimin-valueRange

Path: cim:ExcIEEEST3A.vimin
Minimum voltage regulator input limit (V_IMIN) (< 0). Typical value = -0,2.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vmmax-valueRange

Path: cim:ExcIEEEST3A.vmmax
Maximum inner loop output (V_MMax) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vmmin-valueRange

Path: cim:ExcIEEEST3A.vmmin
Minimum inner loop output (V_MMin) (<= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is positive."

Constraints:

• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vrmax-valueRange

Path: cim:ExcIEEEST3A.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.vrmin-valueRange

Path: cim:ExcIEEEST3A.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST3A.xl-valueRange

Path: cim:ExcIEEEST3A.xl
Reactance associated with potential source (X_L) (>= 0). Typical value = 0,081.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST4B

Nested Properties:

dy302c:ExcIEEEST4B.kc-valueRange

Path: cim:ExcIEEEST4B.kc
Rectifier loading factor proportional to commutating reactance (K_C) (>= 0). Typical value = 0,113.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.kg-valueRange

Path: cim:ExcIEEEST4B.kg
Feedback gain constant of the inner loop field regulator (K_G) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.ki-valueRange

Path: cim:ExcIEEEST4B.ki
Potential circuit gain coefficient (K_I) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.kp-valueRange

Path: cim:ExcIEEEST4B.kp
Potential circuit gain coefficient (K_P) (> 0). Typical value = 9,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.ta-valueRange

Path: cim:ExcIEEEST4B.ta
Voltage regulator time constant (T_A) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.vbmax-valueRange

Path: cim:ExcIEEEST4B.vbmax
Maximum excitation voltage (V_BMax) (> 0). Typical value = 11,63.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.vmmin-valueRangePair

Path: cim:ExcIEEEST4B.vmmin
Minimum inner loop output (V_MMin) (< ExcIEEEST4B.vmmax). Typical value = -99.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcIEEEST4B.vmmax; or positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcIEEEST4B.vmmax

dy302c:ExcIEEEST4B.vrmax-valueRange

Path: cim:ExcIEEEST4B.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.vrmin-valueRange

Path: cim:ExcIEEEST4B.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -0,87.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST4B.xl-valueRange

Path: cim:ExcIEEEST4B.xl
Reactance associated with potential source (X_L) (>= 0). Typical value = 0,124.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST5B

Nested Properties:

dy302c:ExcIEEEST5B.kc-valueRange

Path: cim:ExcIEEEST5B.kc
Rectifier regulation factor (K_C) (>= 0). Typical value = 0,004.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.kr-valueRange

Path: cim:ExcIEEEST5B.kr
Regulator gain (K_R) (> 0). Typical value = 200.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.t1-valueRange

Path: cim:ExcIEEEST5B.t1
Firing circuit time constant (T1) (>= 0). Typical value = 0,004.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tb1-valueRange

Path: cim:ExcIEEEST5B.tb1
Regulator lag time constant (T_B1) (>= 0). Typical value = 6.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tb2-valueRange

Path: cim:ExcIEEEST5B.tb2
Regulator lag time constant (T_B2) (>= 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tc1-valueRange

Path: cim:ExcIEEEST5B.tc1
Regulator lead time constant (T_C1) (>= 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tc2-valueRange

Path: cim:ExcIEEEST5B.tc2
Regulator lead time constant (T_C2) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tob1-valueRange

Path: cim:ExcIEEEST5B.tob1
OEL lag time constant (T_OB1) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tob2-valueRange

Path: cim:ExcIEEEST5B.tob2
OEL lag time constant (T_OB2) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.toc1-valueRange

Path: cim:ExcIEEEST5B.toc1
OEL lead time constant (T_OC1) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.toc2-valueRange

Path: cim:ExcIEEEST5B.toc2
OEL lead time constant (T_OC2) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tub1-valueRange

Path: cim:ExcIEEEST5B.tub1
UEL lag time constant (T_UB1) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tub2-valueRange

Path: cim:ExcIEEEST5B.tub2
UEL lag time constant (T_UB2) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tuc1-valueRange

Path: cim:ExcIEEEST5B.tuc1
UEL lead time constant (T_UC1) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.tuc2-valueRange

Path: cim:ExcIEEEST5B.tuc2
UEL lead time constant (T_UC2) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.vrmax-valueRange

Path: cim:ExcIEEEST5B.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST5B.vrmin-valueRange

Path: cim:ExcIEEEST5B.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -4.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST6B

Nested Properties:

dy302c:ExcIEEEST6B.ilr-valueRange

Path: cim:ExcIEEEST6B.ilr
Exciter output current limit reference (I_LR) (> 0). Typical value = 4,164.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.kci-valueRange

Path: cim:ExcIEEEST6B.kci
Exciter output current limit adjustment (K_CI) (> 0). Typical value = 1,0577.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.kg-valueRange

Path: cim:ExcIEEEST6B.kg
Feedback gain constant of the inner loop field regulator (K_G) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.kia-valueRange

Path: cim:ExcIEEEST6B.kia
Voltage regulator integral gain (K_IA) (> 0). Typical value = 45,094.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.klr-valueRange

Path: cim:ExcIEEEST6B.klr
Exciter output current limiter gain (K_LR) (> 0). Typical value = 17,33.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.kpa-valueRange

Path: cim:ExcIEEEST6B.kpa
Voltage regulator proportional gain (K_PA) (> 0). Typical value = 18,038.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.tg-valueRange

Path: cim:ExcIEEEST6B.tg
Feedback time constant of inner loop field voltage regulator (T_G) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.vamax-valueRange

Path: cim:ExcIEEEST6B.vamax
Maximum voltage regulator output (V_AMAX) (> 0). Typical value = 4,81.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.vamin-valueRange

Path: cim:ExcIEEEST6B.vamin
Minimum voltage regulator output (V_AMIN) (< 0). Typical value = -3,85.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.vrmax-valueRange

Path: cim:ExcIEEEST6B.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 4,81.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST6B.vrmin-valueRange

Path: cim:ExcIEEEST6B.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -3,85.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcIEEEST7B

Nested Properties:

dy302c:ExcIEEEST7B.kh-valueRange

Path: cim:ExcIEEEST7B.kh
High-value gate feedback gain (K_H) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.kia-valueRange

Path: cim:ExcIEEEST7B.kia
Voltage regulator integral gain (K_IA) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.kl-valueRange

Path: cim:ExcIEEEST7B.kl
Low-value gate feedback gain (K_L) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.kpa-valueRange

Path: cim:ExcIEEEST7B.kpa
Voltage regulator proportional gain (K_PA) (> 0). Typical value = 40.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.tb-valueRange

Path: cim:ExcIEEEST7B.tb
Regulator lag time constant (T_B) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.tc-valueRange

Path: cim:ExcIEEEST7B.tc
Regulator lead time constant (T_C) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.tf-valueRange

Path: cim:ExcIEEEST7B.tf
Excitation control system stabilizer time constant (T_F) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.tg-valueRange

Path: cim:ExcIEEEST7B.tg
Feedback time constant of inner loop field voltage regulator (T_G) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.tia-valueRange

Path: cim:ExcIEEEST7B.tia
Feedback time constant (T_IA) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.vmax-valueRange

Path: cim:ExcIEEEST7B.vmax
Maximum voltage reference signal (V_MAX) (> 0 and > ExcIEEEST7B.vmin). Typical value = 1,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.vmin-valueRangePair

Path: cim:ExcIEEEST7B.vmin
Minimum voltage reference signal (V_MIN) (> 0 and < ExcIEEEST7B.vmax). Typical value = 0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcIEEEST7B.vmax; or negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcIEEEST7B.vmax

dy302c:ExcIEEEST7B.vrmax-valueRange

Path: cim:ExcIEEEST7B.vrmax
Maximum voltage regulator output (V_RMAX) (> 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcIEEEST7B.vrmin-valueRange

Path: cim:ExcIEEEST7B.vrmin
Minimum voltage regulator output (V_RMIN) (< 0). Typical value = -4,5.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI

Severity: sh:Violation

Targets:

• targetClass: cim:ExcNI

Nested Properties:

dy302c:ExcNI.ka-valueRange

Path: cim:ExcNI.ka
Voltage regulator gain (Ka) (> 0). Typical value = 210.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.kf-valueRange

Path: cim:ExcNI.kf
Excitation control system stabilizer gain (Kf) (> 0). Typical value 0,01.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.r-valueRange

Path: cim:ExcNI.r
rc / rfd (R) (>= 0). 0 means exciter has negative current capability

0 means exciter does not have negative current capability.
Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.ta-valueRange

Path: cim:ExcNI.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.tf1-valueRange

Path: cim:ExcNI.tf1
Excitation control system stabilizer time constant (Tf1) (> 0). Typical value = 1,0.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.tf2-valueRange

Path: cim:ExcNI.tf2
Excitation control system stabilizer time constant (Tf2) (> 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.tr-valueRange

Path: cim:ExcNI.tr
Time constant (Tr) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcNI.vrmin-valueRangePair

Path: cim:ExcNI.vrmin
Minimum voltage regulator ouput (Vrmin) (< ExcNI.vrmax). Typical value = -2,0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcNI.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcNI.vrmax

dy302c:ExcOEX3T

Severity: sh:Violation

Targets:

• targetClass: cim:ExcOEX3T

Nested Properties:

dy302c:ExcOEX3T.t1-valueRange

Path: cim:ExcOEX3T.t1
Time constant (T₁) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.t2-valueRange

Path: cim:ExcOEX3T.t2
Time constant (T₂) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.t3-valueRange

Path: cim:ExcOEX3T.t3
Time constant (T₃) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.t4-valueRange

Path: cim:ExcOEX3T.t4
Time constant (T₄) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.t5-valueRange

Path: cim:ExcOEX3T.t5
Time constant (T₅) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.t6-valueRange

Path: cim:ExcOEX3T.t6
Time constant (T₆) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.te-valueRange

Path: cim:ExcOEX3T.te
Time constant (T_E) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.tf-valueRange

Path: cim:ExcOEX3T.tf
Time constant (T_F) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcOEX3T.vrmin-valueRangePair

Path: cim:ExcOEX3T.vrmin
Limiter (V_RMIN) (< ExcOEX3T.vrmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcOEX3T.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcOEX3T.vrmax

dy302c:ExcPIC

Severity: sh:Violation

Targets:

• targetClass: cim:ExcPIC

Nested Properties:

dy302c:ExcPIC.efdmin-valueRangePair

Path: cim:ExcPIC.efdmin
Exciter minimum limit (E_fdmin) (< ExcPIC.efdmax). Typical value = -0,87.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcPIC.efdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcPIC.efdmax

dy302c:ExcPIC.ta1-valueRange

Path: cim:ExcPIC.ta1
PI controller time constant (T_a1) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.ta2-valueRange

Path: cim:ExcPIC.ta2
Voltage regulator time constant (T_a2) (>= 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.ta3-valueRange

Path: cim:ExcPIC.ta3
Lead time constant (T_a3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.ta4-valueRange

Path: cim:ExcPIC.ta4
Lag time constant (T_a4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.te-valueRange

Path: cim:ExcPIC.te
Exciter time constant (T_e) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.tf1-valueRange

Path: cim:ExcPIC.tf1
Rate feedback time constant (T_f1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.tf2-valueRange

Path: cim:ExcPIC.tf2
Rate feedback lag time constant (T_f2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcPIC.vrmin-valueRangePair

Path: cim:ExcPIC.vrmin
Voltage regulator minimum limit (V_rmin) (< ExcPIC.vrmax). Typical value = -0,87.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcPIC.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcPIC.vrmax

dy302c:ExcREXS

Severity: sh:Violation

Targets:

• targetClass: cim:ExcREXS

Nested Properties:

dy302c:ExcREXS.kf-valueRange

Path: cim:ExcREXS.kf
Rate feedback gain (Kf) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.ta-valueRange

Path: cim:ExcREXS.ta
Voltage regulator time constant (Ta) (>= 0). If = 0, block is bypassed. Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tb1-valueRange

Path: cim:ExcREXS.tb1
Lag time constant (Tb1) (>= 0). If = 0, block is bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tb2-valueRange

Path: cim:ExcREXS.tb2
Lag time constant (Tb2) (>= 0). If = 0, block is bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tc1-valueRange

Path: cim:ExcREXS.tc1
Lead time constant (Tc1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tc2-valueRange

Path: cim:ExcREXS.tc2
Lead time constant (Tc2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.te-valueRange

Path: cim:ExcREXS.te
Exciter field time constant (Te) (> 0). Typical value = 1,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tf-valueRange

Path: cim:ExcREXS.tf
Rate feedback time constant (Tf) (>= 0). If = 0, the feedback path is not used. Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tf1-valueRange

Path: cim:ExcREXS.tf1
Feedback lead time constant (Tf1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tf2-valueRange

Path: cim:ExcREXS.tf2
Feedback lag time constant (Tf2) (>= 0). If = 0, block is bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.tp-valueRange

Path: cim:ExcREXS.tp
Field current bridge time constant (Tp) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcREXS.vfmin-valueRangePair

Path: cim:ExcREXS.vfmin
Minimum exciter field current (Vfmin) (< ExcREXS.vfmax). Typical value = -20.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcREXS.vfmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcREXS.vfmax

dy302c:ExcREXS.vrmin-valueRangePair

Path: cim:ExcREXS.vrmin
Minimum controller output (Vrmin) (< ExcREXS.vrmax). Typical value = -20.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcREXS.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcREXS.vrmax

dy302c:ExcRQB

Severity: sh:Violation

Targets:

• targetClass: cim:ExcRQB

Nested Properties:

dy302c:ExcRQB.mesu-valueRange

Path: cim:ExcRQB.mesu
Voltage input time constant (MESU) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcRQB.t4m-valueRange

Path: cim:ExcRQB.t4m
Input time constant (T4M) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcRQB.tc-valueRange

Path: cim:ExcRQB.tc
Lead lag time constant (TC) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcRQB.te-valueRange

Path: cim:ExcRQB.te
Lead lag time constant (TE) (>= 0). Typical value = 0,22.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcRQB.tf-valueRange

Path: cim:ExcRQB.tf
Exciter time constant (TF) (>= 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcRQB.ucmin-valueRangePair

Path: cim:ExcRQB.ucmin
Minimum voltage reference limit (UCMIN) (< ExcRQB.ucmax). Typical value = 0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcRQB.ucmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcRQB.ucmax

dy302c:ExcSCRX

Severity: sh:Violation

Targets:

• targetClass: cim:ExcSCRX

Nested Properties:

dy302c:ExcSCRX.emin-valueRangePair

Path: cim:ExcSCRX.emin
Minimum field voltage output (Emin) (< ExcSCRX.emax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSCRX.emax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSCRX.emax

dy302c:ExcSCRX.k-valueRange

Path: cim:ExcSCRX.k
Gain (K) (> 0). Typical value = 200.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSCRX.tb-valueRange

Path: cim:ExcSCRX.tb
Denominator time constant of lag-lead block (Tb) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSCRX.te-valueRange

Path: cim:ExcSCRX.te
Time constant of gain block (Te) (> 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSEXS

Severity: sh:Violation

Targets:

• targetClass: cim:ExcSEXS

Nested Properties:

dy302c:ExcSEXS.efdmin-valueRangePair

Path: cim:ExcSEXS.efdmin
Field voltage clipping minimum limit (Efdmin) (< ExcSEXS.efdmax). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSEXS.efdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSEXS.efdmax

dy302c:ExcSEXS.emin-valueRangePair

Path: cim:ExcSEXS.emin
Minimum field voltage output (Emin) (< ExcSEXS.emax). Typical value = -5.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSEXS.emax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSEXS.emax

dy302c:ExcSEXS.k-valueRange

Path: cim:ExcSEXS.k
Gain (K) (> 0). Typical value = 100.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSEXS.tb-valueRange

Path: cim:ExcSEXS.tb
Denominator time constant of lag-lead block (Tb) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSEXS.tc-valueRange

Path: cim:ExcSEXS.tc
PI controller phase lead time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSEXS.te-valueRange

Path: cim:ExcSEXS.te
Time constant of gain block (Te) (> 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK

Severity: sh:Violation

Targets:

• targetClass: cim:ExcSK

Nested Properties:

dy302c:ExcSK.efdmin-valueRangePair

Path: cim:ExcSK.efdmin
Field voltage clipping lower level limit (Efdmin) (< ExcSK.efdmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSK.efdmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSK.efdmax

dy302c:ExcSK.emin-valueRangePair

Path: cim:ExcSK.emin
Minimum field voltage output (Emin) (< ExcSK.emax). Typical value = -20.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSK.emax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSK.emax

dy302c:ExcSK.sbase-valueRange

Path: cim:ExcSK.sbase
Apparent power of the unit (Sbase) (> 0). Unit = MVA. Typical value = 259.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK.tc-valueRange

Path: cim:ExcSK.tc
PI controller phase lead time constant (Tc) (>= 0). Typical value = 8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK.te-valueRange

Path: cim:ExcSK.te
Time constant of gain block (Te) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK.ti-valueRange

Path: cim:ExcSK.ti
PI controller phase lead time constant (Ti) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK.tp-valueRange

Path: cim:ExcSK.tp
Time constant (Tp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK.tr-valueRange

Path: cim:ExcSK.tr
Voltage transducer time constant (Tr) (>= 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcSK.uimin-valueRangePair

Path: cim:ExcSK.uimin
Minimum error (UImin) (< ExcSK.uimax). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSK.uimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSK.uimax

dy302c:ExcSK.urmin-valueRangePair

Path: cim:ExcSK.urmin
Minimum controller output (URmin) (< ExcSK.urmax). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSK.urmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSK.urmax

dy302c:ExcSK.vtmin-valueRangePair

Path: cim:ExcSK.vtmin
Minimum terminal voltage input (Vtmin) (< ExcSK.vtmax). Determines the range of voltage deadband. Typical value = 0,95.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcSK.vtmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcSK.vtmax

dy302c:ExcST1A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcST1A

Nested Properties:

dy302c:ExcST1A.ka-valueRange

Path: cim:ExcST1A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 190.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.kc-valueRange

Path: cim:ExcST1A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.kf-valueRange

Path: cim:ExcST1A.kf
Excitation control system stabilizer gains (Kf) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.ta-valueRange

Path: cim:ExcST1A.ta
Voltage regulator time constant (Ta) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.tb-valueRange

Path: cim:ExcST1A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.tb1-valueRange

Path: cim:ExcST1A.tb1
Voltage regulator time constant (Tb1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.tc-valueRange

Path: cim:ExcST1A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.tc1-valueRange

Path: cim:ExcST1A.tc1
Voltage regulator time constant (Tc1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.tf-valueRange

Path: cim:ExcST1A.tf
Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.vamax-valueRange

Path: cim:ExcST1A.vamax
Maximum voltage regulator output (Vamax) (> 0). Typical value = 999.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.vamin-valueRange

Path: cim:ExcST1A.vamin
Minimum voltage regulator output (Vamin) (< 0). Typical value = -999.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.vimax-valueRange

Path: cim:ExcST1A.vimax
Maximum voltage regulator input limit (Vimax) (> 0). Typical value = 999.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.vimin-valueRange

Path: cim:ExcST1A.vimin
Minimum voltage regulator input limit (Vimin) (< 0). Typical value = -999.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.vrmax-valueRange

Path: cim:ExcST1A.vrmax
Maximum voltage regulator outputs (Vrmax) (> 0) . Typical value = 7,8.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST1A.vrmin-valueRange

Path: cim:ExcST1A.vrmin
Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -6,7.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcST2A

Nested Properties:

dy302c:ExcST2A.efdmax-valueRange

Path: cim:ExcST2A.efdmax
Maximum field voltage (Efdmax) (>= 0). Typical value = 99.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.ka-valueRange

Path: cim:ExcST2A.ka
Voltage regulator gain (Ka) (> 0). Typical value = 120.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.kc-valueRange

Path: cim:ExcST2A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 1,82.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.kf-valueRange

Path: cim:ExcST2A.kf
Excitation control system stabilizer gains (kf) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.ki-valueRange

Path: cim:ExcST2A.ki
Potential circuit gain coefficient (K_i) (>= 0). Typical value = 8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.kp-valueRange

Path: cim:ExcST2A.kp
Potential circuit gain coefficient (K_p) (>= 0). Typical value = 4,88.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.ta-valueRange

Path: cim:ExcST2A.ta
Voltage regulator time constant (Ta) (> 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.tb-valueRange

Path: cim:ExcST2A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.tc-valueRange

Path: cim:ExcST2A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.te-valueRange

Path: cim:ExcST2A.te
Exciter time constant, integration rate associated with exciter control (Te) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.tf-valueRange

Path: cim:ExcST2A.tf
Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 0,7.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.vrmax-valueRange

Path: cim:ExcST2A.vrmax
Maximum voltage regulator outputs (Vrmax) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST2A.vrmin-valueRange

Path: cim:ExcST2A.vrmin
Minimum voltage regulator outputs (Vrmin) (< 0). Typical value = -1.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A

Severity: sh:Violation

Targets:

• targetClass: cim:ExcST3A

Nested Properties:

dy302c:ExcST3A.efdmax-valueRange

Path: cim:ExcST3A.efdmax
Maximum AVR output (Efdmax) (>= 0). Typical value = 6,9.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.kc-valueRange

Path: cim:ExcST3A.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 1,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.kg-valueRange

Path: cim:ExcST3A.kg
Feedback gain constant of the inner loop field regulator (Kg) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.ki-valueRange

Path: cim:ExcST3A.ki
Potential circuit gain coefficient (K_i) (>= 0). Typical value = 4,83.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.kj-valueRange

Path: cim:ExcST3A.kj
AVR gain (Kj) (> 0). Typical value = 200.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.km-valueRange

Path: cim:ExcST3A.km
Forward gain constant of the inner loop field regulator (Km) (> 0). Typical value = 7,04.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.kp-valueRange

Path: cim:ExcST3A.kp
Potential source gain (K_p) (> 0). Typical value = 4,37.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.tb-valueRange

Path: cim:ExcST3A.tb
Voltage regulator time constant (Tb) (>= 0). Typical value = 6,67.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.tc-valueRange

Path: cim:ExcST3A.tc
Voltage regulator time constant (Tc) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.tm-valueRange

Path: cim:ExcST3A.tm
Forward time constant of inner loop field regulator (Tm) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.vbmax-valueRange

Path: cim:ExcST3A.vbmax
Maximum excitation voltage (Vbmax) (> 0). Typical value = 8,63.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.vgmax-valueRange

Path: cim:ExcST3A.vgmax
Maximum inner loop feedback voltage (Vgmax) (>= 0). Typical value = 6,53.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.vimax-valueRange

Path: cim:ExcST3A.vimax
Maximum voltage regulator input limit (Vimax) (> 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.vimin-valueRange

Path: cim:ExcST3A.vimin
Minimum voltage regulator input limit (Vimin) (< 0). Typical value = -0,2.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.vrmax-valueRange

Path: cim:ExcST3A.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.vrmin-valueRange

Path: cim:ExcST3A.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = -1.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST3A.xl-valueRange

Path: cim:ExcST3A.xl
Reactance associated with potential source (Xl) (>= 0). Typical value = 0,09.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcST4B

Nested Properties:

dy302c:ExcST4B.kc-valueRange

Path: cim:ExcST4B.kc
Rectifier loading factor proportional to commutating reactance (Kc) (>= 0). Typical value = 0,113.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.kg-valueRange

Path: cim:ExcST4B.kg
Feedback gain constant of the inner loop field regulator (Kg) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.ki-valueRange

Path: cim:ExcST4B.ki
Potential circuit gain coefficient (Ki) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.kp-valueRange

Path: cim:ExcST4B.kp
Potential circuit gain coefficient (Kp) (> 0). Typical value = 9,3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.ta-valueRange

Path: cim:ExcST4B.ta
Voltage regulator time constant (Ta) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.vbmax-valueRange

Path: cim:ExcST4B.vbmax
Maximum excitation voltage (Vbmax) (> 0). Typical value = 11,63.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.vgmax-valueRange

Path: cim:ExcST4B.vgmax
Maximum inner loop feedback voltage (Vgmax) (>= 0). Typical value = 5,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.vmmin-valueRangePair

Path: cim:ExcST4B.vmmin
Minimum inner loop output (Vmmin) (< ExcST4B.vmmax). Typical value = -99.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcST4B.vmmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcST4B.vmmax

dy302c:ExcST4B.vrmax-valueRange

Path: cim:ExcST4B.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.vrmin-valueRange

Path: cim:ExcST4B.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = -0,87.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST4B.xl-valueRange

Path: cim:ExcST4B.xl
Reactance associated with potential source (Xl) (>= 0). Typical value = 0,124.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcST6B

Nested Properties:

dy302c:ExcST6B.ilr-valueRange

Path: cim:ExcST6B.ilr
Exciter output current limit reference (Ilr) (> 0). Typical value = 4,164.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.kcl-valueRange

Path: cim:ExcST6B.kcl
Exciter output current limit adjustment (Kcl) (> 0). Typical value = 1,0577.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.kg-valueRange

Path: cim:ExcST6B.kg
Feedback gain constant of the inner loop field regulator (Kg) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.kia-valueRange

Path: cim:ExcST6B.kia
Voltage regulator integral gain (Kia) (> 0). Typical value = 45,094.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.klr-valueRange

Path: cim:ExcST6B.klr
Exciter output current limit adjustment (Kcl) (> 0). Typical value = 17,33.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.kpa-valueRange

Path: cim:ExcST6B.kpa
Voltage regulator proportional gain (Kpa) (> 0). Typical value = 18,038.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.tg-valueRange

Path: cim:ExcST6B.tg
Feedback time constant of inner loop field voltage regulator (Tg) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.ts-valueRange

Path: cim:ExcST6B.ts
Rectifier firing time constant (Ts) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.tvd-valueRange

Path: cim:ExcST6B.tvd
Voltage regulator derivative gain (Tvd) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.vamax-valueRange

Path: cim:ExcST6B.vamax
Maximum voltage regulator output (Vamax) (> 0). Typical value = 4,81.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.vamin-valueRange

Path: cim:ExcST6B.vamin
Minimum voltage regulator output (Vamin) (< 0). Typical value = -3,85.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.vimin-valueRangePair

Path: cim:ExcST6B.vimin
Minimum voltage regulator input limit (Vimin) (< ExcST6B.vimax). Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcST6B.vimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcST6B.vimax

dy302c:ExcST6B.vrmax-valueRange

Path: cim:ExcST6B.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 4,81.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST6B.vrmin-valueRange

Path: cim:ExcST6B.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = -3,85.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B

Severity: sh:Violation

Targets:

• targetClass: cim:ExcST7B

Nested Properties:

dy302c:ExcST7B.kh-valueRange

Path: cim:ExcST7B.kh
High-value gate feedback gain (Kh) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.kia-valueRange

Path: cim:ExcST7B.kia
Voltage regulator integral gain (Kia) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.kl-valueRange

Path: cim:ExcST7B.kl
Low-value gate feedback gain (Kl) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.kpa-valueRange

Path: cim:ExcST7B.kpa
Voltage regulator proportional gain (Kpa) (> 0). Typical value = 40.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.tb-valueRange

Path: cim:ExcST7B.tb
Regulator lag time constant (Tb) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.tc-valueRange

Path: cim:ExcST7B.tc
Regulator lead time constant (Tc) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.tf-valueRange

Path: cim:ExcST7B.tf
Excitation control system stabilizer time constant (Tf) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.tg-valueRange

Path: cim:ExcST7B.tg
Feedback time constant of inner loop field voltage regulator (Tg) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.tia-valueRange

Path: cim:ExcST7B.tia
Feedback time constant (Tia) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.ts-valueRange

Path: cim:ExcST7B.ts
Rectifier firing time constant (Ts) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.vmax-valueRange

Path: cim:ExcST7B.vmax
Maximum voltage reference signal (Vmax) (> 0 and > ExcST7B.vmin)). Typical value = 1,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.vmin-valueRangePair

Path: cim:ExcST7B.vmin
Minimum voltage reference signal (Vmin) (> 0 and < ExcST7B.vmax). Typical value = 0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than ExcST7B.vmax; or negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:ExcST7B.vmax

dy302c:ExcST7B.vrmax-valueRange

Path: cim:ExcST7B.vrmax
Maximum voltage regulator output (Vrmax) (> 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:ExcST7B.vrmin-valueRange

Path: cim:ExcST7B.vrmin
Minimum voltage regulator output (Vrmin) (< 0). Typical value = -4,5.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1

Severity: sh:Violation

Targets:

• targetClass: cim:GovCT1

Nested Properties:

dy302c:GovCT1.kturb-valueRange

Path: cim:GovCT1.kturb
Turbine gain (Kturb) (> 0). Typical value = 1,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.minerr-valueRangePair

Path: cim:GovCT1.minerr
Minimum value for speed error signal (minerr) (< GovCT1.maxerr). Typical value = -0,05.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovCT1.maxerr."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovCT1.maxerr

dy302c:GovCT1.mwbase-valueRange

Path: cim:GovCT1.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.ta-valueRange

Path: cim:GovCT1.ta
Acceleration limiter time constant (Ta) (> 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tact-valueRange

Path: cim:GovCT1.tact
Actuator time constant (Tact) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tb-valueRange

Path: cim:GovCT1.tb
Turbine lag time constant (Tb) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tc-valueRange

Path: cim:GovCT1.tc
Turbine lead time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tdgov-valueRange

Path: cim:GovCT1.tdgov
Governor derivative controller time constant (Tdgov) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.teng-valueRange

Path: cim:GovCT1.teng
Transport time delay for diesel engine used in representing diesel engines where there is a small but measurable transport delay between a change in fuel flow setting and the development of torque (Teng) (>= 0). Teng should be zero in all but special cases where this transport delay is of particular concern. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tfload-valueRange

Path: cim:GovCT1.tfload
Load-limiter time constant (Tfload) (> 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tpelec-valueRange

Path: cim:GovCT1.tpelec
Electrical power transducer time constant (Tpelec) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tsa-valueRange

Path: cim:GovCT1.tsa
Temperature detection lead time constant (Tsa) (>= 0). Typical value = 4.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.tsb-valueRange

Path: cim:GovCT1.tsb
Temperature detection lag time constant (Tsb) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT1.vmin-valueRangePair

Path: cim:GovCT1.vmin
Minimum valve position limit (Vmin) (< GovCT1.vmax). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovCT1.vmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovCT1.vmax

dy302c:GovCT2

Severity: sh:Violation

Targets:

• targetClass: cim:GovCT2

Nested Properties:

dy302c:GovCT2.minerr-valueRangePair

Path: cim:GovCT2.minerr
Minimum value for speed error signal (Minerr) (< GovCT2.maxerr). Typical value = -1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovCT2.maxerr."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovCT2.maxerr

dy302c:GovCT2.mwbase-valueRange

Path: cim:GovCT2.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.ta-valueRange

Path: cim:GovCT2.ta
Acceleration limiter time constant (Ta) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tact-valueRange

Path: cim:GovCT2.tact
Actuator time constant (Tact) (>= 0). Typical value = 0,4.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tb-valueRange

Path: cim:GovCT2.tb
Turbine lag time constant (Tb) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tc-valueRange

Path: cim:GovCT2.tc
Turbine lead time constant (Tc) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tdgov-valueRange

Path: cim:GovCT2.tdgov
Governor derivative controller time constant (Tdgov) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.teng-valueRange

Path: cim:GovCT2.teng
Transport time delay for diesel engine used in representing diesel engines where there is a small but measurable transport delay between a change in fuel flow setting and the development of torque (Teng) (>= 0). Teng should be zero in all but special cases where this transport delay is of particular concern. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tfload-valueRange

Path: cim:GovCT2.tfload
Load limiter time constant (Tfload) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tpelec-valueRange

Path: cim:GovCT2.tpelec
Electrical power transducer time constant (Tpelec) (>= 0). Typical value = 2,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tsa-valueRange

Path: cim:GovCT2.tsa
Temperature detection lead time constant (Tsa) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.tsb-valueRange

Path: cim:GovCT2.tsb
Temperature detection lag time constant (Tsb) (>= 0). Typical value = 50.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovCT2.vmin-valueRangePair

Path: cim:GovCT2.vmin
Minimum valve position limit (Vmin) (< GovCT2.vmax). Typical value = 0,175.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovCT2.vmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovCT2.vmax

dy302c:GovGAST

Severity: sh:Violation

Targets:

• targetClass: cim:GovGAST

Nested Properties:

dy302c:GovGAST.mwbase-valueRange

Path: cim:GovGAST.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST.r-valueRange

Path: cim:GovGAST.r
Permanent droop (R) (>0). Typical value = 0,04.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST.t1-valueRange

Path: cim:GovGAST.t1
Governor mechanism time constant (T1) (>= 0). T1 represents the natural valve positioning time constant of the governor for small disturbances, as seen when rate limiting is not in effect. Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST.t2-valueRange

Path: cim:GovGAST.t2
Turbine power time constant (T2) (>= 0). T2 represents delay due to internal energy storage of the gas turbine engine. T2 can be used to give a rough approximation to the delay associated with acceleration of the compressor spool of a multi-shaft engine, or with the compressibility of gas in the plenum of a free power turbine of an aero-derivative unit, for example. Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST.t3-valueRange

Path: cim:GovGAST.t3
Turbine exhaust temperature time constant (T3) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST.vmin-valueRangePair

Path: cim:GovGAST.vmin
Minimum turbine power, PU of MWbase (Vmin) (< GovGAST.vmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovGAST.vmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovGAST.vmax

dy302c:GovGAST1

Severity: sh:Violation

Targets:

• targetClass: cim:GovGAST1

Nested Properties:

dy302c:GovGAST1.b-valueRange

Path: cim:GovGAST1.b
Turbine power time constant denominator scale factor (b) (>0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.mwbase-valueRange

Path: cim:GovGAST1.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.r-valueRange

Path: cim:GovGAST1.r
Permanent droop (R) (>0). Typical value = 0,04.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.t1-valueRange

Path: cim:GovGAST1.t1
Governor mechanism time constant (T1) (>= 0). T1 represents the natural valve positioning time constant of the governor for small disturbances, as seen when rate limiting is not in effect. Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.t2-valueRange

Path: cim:GovGAST1.t2
Turbine power time constant (T2) (>= 0). T2 represents delay due to internal energy storage of the gas turbine engine. T2 can be used to give a rough approximation to the delay associated with acceleration of the compressor spool of a multi-shaft engine, or with the compressibility of gas in the plenum of the free power turbine of an aero-derivative unit, for example. Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.t3-valueRange

Path: cim:GovGAST1.t3
Turbine exhaust temperature time constant (T3) (>= 0). T3 represents delay in the exhaust temperature and load limiting system. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.t4-valueRange

Path: cim:GovGAST1.t4
Governor lead time constant (T4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.t5-valueRange

Path: cim:GovGAST1.t5
Governor lag time constant (T5) (>= 0). If = 0, entire gain and lead-lag block is bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.tltr-valueRange

Path: cim:GovGAST1.tltr
Valve position averaging time constant (Tltr) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST1.vmin-valueRangePair

Path: cim:GovGAST1.vmin
Minimum turbine power, PU of MWbase (Vmin) (< GovGAST1.vmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovGAST1.vmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovGAST1.vmax

dy302c:GovGAST2

Severity: sh:Violation

Targets:

• targetClass: cim:GovGAST2

Nested Properties:

dy302c:GovGAST2.ecr-valueRange

Path: cim:GovGAST2.ecr
Combustion reaction time delay (Ecr) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.etd-valueRange

Path: cim:GovGAST2.etd
Turbine and exhaust delay (Etd) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.mwbase-valueRange

Path: cim:GovGAST2.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.t-valueRange

Path: cim:GovGAST2.t
Fuel control time constant (T) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.t3-valueRange

Path: cim:GovGAST2.t3
Radiation shield time constant (T3) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.t4-valueRange

Path: cim:GovGAST2.t4
Thermocouple time constant (T4) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.t5-valueRange

Path: cim:GovGAST2.t5
Temperature control time constant (T5) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.tcd-valueRange

Path: cim:GovGAST2.tcd
Compressor discharge time constant (Tcd) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.tf-valueRange

Path: cim:GovGAST2.tf
Fuel system time constant (Tf) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.tmin-valueRangePair

Path: cim:GovGAST2.tmin
Minimum turbine limit (Tmin) (< GovGAST2.tmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovGAST2.tmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovGAST2.tmax

dy302c:GovGAST2.tt-valueRange

Path: cim:GovGAST2.tt
Temperature controller integration rate (Tt) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.x-valueRange

Path: cim:GovGAST2.x
Governor lead time constant (X) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST2.y-valueRange

Path: cim:GovGAST2.y
Governor lag time constant (Y) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3

Severity: sh:Violation

Targets:

• targetClass: cim:GovGAST3

Nested Properties:

dy302c:GovGAST3.tac-valueRange

Path: cim:GovGAST3.tac
Fuel control time constant (Tac) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3.tc-valueRange

Path: cim:GovGAST3.tc
Compressor discharge volume time constant (Tc) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3.td-valueRange

Path: cim:GovGAST3.td
Temperature controller derivative gain (Td) (>= 0). Typical value = 3,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3.tg-valueRange

Path: cim:GovGAST3.tg
Time constant of speed governor (Tg) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3.tsi-valueRange

Path: cim:GovGAST3.tsi
Time constant of radiation shield (Tsi) (>= 0). Typical value = 15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3.ttc-valueRange

Path: cim:GovGAST3.ttc
Time constant of thermocouple (Ttc) (>= 0). Typical value = 2,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST3.ty-valueRange

Path: cim:GovGAST3.ty
Time constant of fuel valve positioner (Ty) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST4

Severity: sh:Violation

Targets:

• targetClass: cim:GovGAST4

Nested Properties:

dy302c:GovGAST4.ta-valueRange

Path: cim:GovGAST4.ta
Maximum gate opening velocity (TA) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST4.tc-valueRange

Path: cim:GovGAST4.tc
Maximum gate closing velocity (TC) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST4.tcm-valueRange

Path: cim:GovGAST4.tcm
Fuel control time constant (Tcm) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST4.tm-valueRange

Path: cim:GovGAST4.tm
Compressor discharge volume time constant (Tm) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGAST4.ty-valueRange

Path: cim:GovGAST4.ty
Time constant of fuel valve positioner (Ty) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD

Severity: sh:Violation

Targets:

• targetClass: cim:GovGASTWD

Nested Properties:

dy302c:GovGASTWD.ecr-valueRange

Path: cim:GovGASTWD.ecr
Combustion reaction time delay (Ecr) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.etd-valueRange

Path: cim:GovGASTWD.etd
Turbine and exhaust delay (Etd) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.kdroop-valueRange

Path: cim:GovGASTWD.kdroop
(Kdroop) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.mwbase-valueRange

Path: cim:GovGASTWD.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.t-valueRange

Path: cim:GovGASTWD.t
Fuel control time constant (T) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.t3-valueRange

Path: cim:GovGASTWD.t3
Radiation shield time constant (T3) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.t4-valueRange

Path: cim:GovGASTWD.t4
Thermocouple time constant (T4) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.t5-valueRange

Path: cim:GovGASTWD.t5
Temperature control time constant (T5) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.tcd-valueRange

Path: cim:GovGASTWD.tcd
Compressor discharge time constant (Tcd) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.td-valueRange

Path: cim:GovGASTWD.td
Power transducer time constant (Td) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.tf-valueRange

Path: cim:GovGASTWD.tf
Fuel system time constant (Tf) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovGASTWD.tmin-valueRangePair

Path: cim:GovGASTWD.tmin
Minimum turbine limit (Tmin) (< GovGASTWD.tmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovGASTWD.tmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovGASTWD.tmax

dy302c:GovGASTWD.tt-valueRange

Path: cim:GovGASTWD.tt
Temperature controller integration rate (Tt) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydro1

Nested Properties:

dy302c:GovHydro1.at-valueRange

Path: cim:GovHydro1.at
Turbine gain (At) (> 0). Typical value = 1,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.dturb-valueRange

Path: cim:GovHydro1.dturb
Turbine damping factor (Dturb) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.gmin-valueRangePair

Path: cim:GovHydro1.gmin
Minimum gate opening (Gmin) (>= 0 and < GovHydro1.gmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydro1.gmax; or negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydro1.gmax

dy302c:GovHydro1.mwbase-valueRange

Path: cim:GovHydro1.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.qnl-valueRange

Path: cim:GovHydro1.qnl
No-load flow at nominal head (qnl) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.rperm-valueRange

Path: cim:GovHydro1.rperm
Permanent droop (R) (> 0). Typical value = 0,04.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.rperm-valueRangePair

Path: cim:GovHydro1.rperm
Temporary droop (r) (GovHydro1.rtemp > GovHydro1.rperm). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value of GovHydro1.rperm is either equal to or greater than GovHydro1.rtemp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydro1.rtemp

dy302c:GovHydro1.tf-valueRange

Path: cim:GovHydro1.tf
Filter time constant (Tf) (> 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.tg-valueRange

Path: cim:GovHydro1.tg
Gate servo time constant (Tg) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.tr-valueRange

Path: cim:GovHydro1.tr
Washout time constant (Tr) (> 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.tw-valueRange

Path: cim:GovHydro1.tw
Water inertia time constant (Tw) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro1.velm-valueRange

Path: cim:GovHydro1.velm
Maximum gate velocity (Vlem) (> 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydro2

Nested Properties:

dy302c:GovHydro2.bturb-valueRange

Path: cim:GovHydro2.bturb
Turbine denominator multiplier (Bturb) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2.mwbase-valueRange

Path: cim:GovHydro2.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2.pmin-valueRangePair

Path: cim:GovHydro2.pmin
Minimum gate opening (Pmin) (< GovHydro2.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydro2.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydro2.pmax

dy302c:GovHydro2.tg-valueRange

Path: cim:GovHydro2.tg
Gate servo time constant (Tg) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2.tp-valueRange

Path: cim:GovHydro2.tp
Pilot servo valve time constant (Tp) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2.tr-valueRange

Path: cim:GovHydro2.tr
Dashpot time constant (Tr) (>= 0). Typical value = 12.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2.tw-valueRange

Path: cim:GovHydro2.tw
Water inertia time constant (Tw) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro2.uc-valueRange

Path: cim:GovHydro2.uc
Maximum gate closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -0,1.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydro3

Nested Properties:

dy302c:GovHydro3.at-valueRange

Path: cim:GovHydro3.at
Turbine gain (At) (>0). Typical value = 1,2.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3.mwbase-valueRange

Path: cim:GovHydro3.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3.pmin-valueRangePair

Path: cim:GovHydro3.pmin
Minimum gate opening, PU of MWbase (Pmin) (< GovHydro3.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydro3.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydro3.pmax

dy302c:GovHydro3.td-valueRange

Path: cim:GovHydro3.td
Input filter time constant (Td) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3.tf-valueRange

Path: cim:GovHydro3.tf
Washout time constant (Tf) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3.tp-valueRange

Path: cim:GovHydro3.tp
Gate servo time constant (Tp) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3.tt-valueRange

Path: cim:GovHydro3.tt
Power feedback time constant (Tt) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro3.tw-valueRange

Path: cim:GovHydro3.tw
Water inertia time constant (Tw) (>= 0). If = 0, block is bypassed. Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydro4

Nested Properties:

dy302c:GovHydro4.gmin-valueRangePair

Path: cim:GovHydro4.gmin
Minimum gate opening, PU of MWbase (Gmin) (< GovHydro4.gmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydro4.gmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydro4.gmax

dy302c:GovHydro4.mwbase-valueRange

Path: cim:GovHydro4.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.rperm-valueRange

Path: cim:GovHydro4.rperm
Permanent droop (Rperm) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.rtemp-valueRange

Path: cim:GovHydro4.rtemp
Temporary droop (Rtemp) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.tblade-valueRange

Path: cim:GovHydro4.tblade
Blade servo time constant (Tblade) (>= 0). Typical value = 100.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.tg-valueRange

Path: cim:GovHydro4.tg
Gate servo time constant (Tg) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.tp-valueRange

Path: cim:GovHydro4.tp
Pilot servo time constant (Tp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.tr-valueRange

Path: cim:GovHydro4.tr
Dashpot time constant (Tr) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydro4.tw-valueRange

Path: cim:GovHydro4.tw
Water inertia time constant (Tw) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroDD

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroDD

Nested Properties:

dy302c:GovHydroDD.gmin-valueRangePair

Path: cim:GovHydroDD.gmin
Minimum gate opening (Gmin) (< GovHydroDD.gmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroDD.gmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroDD.gmax

dy302c:GovHydroDD.mwbase-valueRange

Path: cim:GovHydroDD.mwbase
Base for power values (MWbase) (>0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroDD.pmin-valueRangePair

Path: cim:GovHydroDD.pmin
Minimum gate opening, PU of MWbase (Pmin) (> GovHydroDD.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroDD.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroDD.pmax

dy302c:GovHydroDD.td-valueRange

Path: cim:GovHydroDD.td
Input filter time constant (Td) (>= 0). If = 0, block is bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroDD.tf-valueRange

Path: cim:GovHydroDD.tf
Washout time constant (Tf) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroDD.tp-valueRange

Path: cim:GovHydroDD.tp
Gate servo time constant (Tp) (>= 0). If = 0, block is bypassed. Typical value = 0,35.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroDD.tt-valueRange

Path: cim:GovHydroDD.tt
Power feedback time constant (Tt) (>= 0). If = 0, block is bypassed. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroDD.tturb-valueRange

Path: cim:GovHydroDD.tturb
Turbine time constant (Tturb) (>= 0). See parameter detail 3. Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroFrancis

Nested Properties:

dy302c:GovHydroFrancis.ta-valueRange

Path: cim:GovHydroFrancis.ta
Derivative gain (Ta) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis.td-valueRange

Path: cim:GovHydroFrancis.td
Washout time constant (Td) (>= 0). Typical value = 6.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis.ts-valueRange

Path: cim:GovHydroFrancis.ts
Gate servo time constant (Ts) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis.twnc-valueRange

Path: cim:GovHydroFrancis.twnc
Water inertia time constant (Twnc) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis.twng-valueRange

Path: cim:GovHydroFrancis.twng
Water tunnel and surge chamber inertia time constant (Twng) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis.tx-valueRange

Path: cim:GovHydroFrancis.tx
Derivative feedback gain (Tx) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroFrancis.valvmin-valueRangePair

Path: cim:GovHydroFrancis.valvmin
Minimum gate opening (ValvMin) (< GovHydroFrancis.valvmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroFrancis.valvmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroFrancis.valvmax

dy302c:GovHydroIEEE0

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroIEEE0

Nested Properties:

dy302c:GovHydroIEEE0.mwbase-valueRange

Path: cim:GovHydroIEEE0.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE0.pmin-valueRangePair

Path: cim:GovHydroIEEE0.pmin
Gate minimum (Pmin) (< GovHydroIEEE.pmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroIEEE.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroIEEE.pmax

dy302c:GovHydroIEEE0.t1-valueRange

Path: cim:GovHydroIEEE0.t1
Governor lag time constant (T1) (>= 0). Typical value = 0,25.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE0.t2-valueRange

Path: cim:GovHydroIEEE0.t2
Governor lead time constant (T2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE0.t3-valueRange

Path: cim:GovHydroIEEE0.t3
Gate actuator time constant (T3) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE0.t4-valueRange

Path: cim:GovHydroIEEE0.t4
Water starting time (T4) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroIEEE2

Nested Properties:

dy302c:GovHydroIEEE2.bturb-valueRange

Path: cim:GovHydroIEEE2.bturb
Turbine denominator multiplier (Bturb) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2.mwbase-valueRange

Path: cim:GovHydroIEEE2.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2.pmin-valueRangePair

Path: cim:GovHydroIEEE2.pmin
Minimum gate opening (Pmin) (<GovHydroIEEE2.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroIEEE2.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroIEEE2.pmax

dy302c:GovHydroIEEE2.tg-valueRange

Path: cim:GovHydroIEEE2.tg
Gate servo time constant (Tg) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2.tp-valueRange

Path: cim:GovHydroIEEE2.tp
Pilot servo valve time constant (Tp) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2.tr-valueRange

Path: cim:GovHydroIEEE2.tr
Dashpot time constant (Tr) (>= 0). Typical value = 12.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2.tw-valueRange

Path: cim:GovHydroIEEE2.tw
Water inertia time constant (Tw) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroIEEE2.uc-valueRange

Path: cim:GovHydroIEEE2.uc
Maximum gate closing velocity (Uc) (<0). Typical value = -0,1.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroPID

Nested Properties:

dy302c:GovHydroPID.mwbase-valueRange

Path: cim:GovHydroPID.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID.pmin-valueRangePair

Path: cim:GovHydroPID.pmin
Minimum gate opening, PU of MWbase (Pmin) (< GovHydroPID.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroPID.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroPID.pmax

dy302c:GovHydroPID.td-valueRange

Path: cim:GovHydroPID.td
Input filter time constant (Td) (>= 0). If = 0, block is bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID.tf-valueRange

Path: cim:GovHydroPID.tf
Washout time constant (Tf) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID.tp-valueRange

Path: cim:GovHydroPID.tp
Gate servo time constant (Tp) (>= 0). If = 0, block is bypassed. Typical value = 0,35.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID.tt-valueRange

Path: cim:GovHydroPID.tt
Power feedback time constant (Tt) (>= 0). If = 0, block is bypassed. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID.tturb-valueRange

Path: cim:GovHydroPID.tturb
Turbine time constant (Tturb) (>= 0). See Parameter detail 3. Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID2

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroPID2

Nested Properties:

dy302c:GovHydroPID2.gmin-valueRangePair

Path: cim:GovHydroPID2.gmin
Minimum gate opening (Gmin) (> GovHydroPID2.gmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroPID2.gmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroPID2.gmax

dy302c:GovHydroPID2.mwbase-valueRange

Path: cim:GovHydroPID2.mwbase
Base for power values (MWbase) (>0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID2.ta-valueRange

Path: cim:GovHydroPID2.ta
Controller time constant (Ta) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID2.tb-valueRange

Path: cim:GovHydroPID2.tb
Gate servo time constant (Tb) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID2.treg-valueRange

Path: cim:GovHydroPID2.treg
Speed detector time constant (Treg) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID2.tw-valueRange

Path: cim:GovHydroPID2.tw
Water inertia time constant (Tw) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPID2.velmax-valueRangePair

Path: cim:GovHydroPID2.velmax
Maximum gate opening velocity (Velmax) (< GovHydroPID2.velmin). Unit = PU / s. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroPID2.velmin."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroPID2.velmin

dy302c:GovHydroPelton

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroPelton

Nested Properties:

dy302c:GovHydroPelton.ta-valueRange

Path: cim:GovHydroPelton.ta
Derivative gain (accelerometer time constant) (Ta) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPelton.ts-valueRange

Path: cim:GovHydroPelton.ts
Gate servo time constant (Ts) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPelton.tv-valueRange

Path: cim:GovHydroPelton.tv
Servomotor integrator time constant (Tv) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPelton.twnc-valueRange

Path: cim:GovHydroPelton.twnc
Water inertia time constant (Twnc) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPelton.twng-valueRange

Path: cim:GovHydroPelton.twng
Water tunnel and surge chamber inertia time constant (Twng) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPelton.tx-valueRange

Path: cim:GovHydroPelton.tx
Electronic integrator time constant (Tx) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroPelton.valvmin-valueRangePair

Path: cim:GovHydroPelton.valvmin
Minimum gate opening (ValvMin) (< GovHydroPelton.valvmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroPelton.valvmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroPelton.valvmax

dy302c:GovHydroR

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroR

Nested Properties:

dy302c:GovHydroR.gmin-valueRangePair

Path: cim:GovHydroR.gmin
Minimum governor output (Gmin) (< GovHydroR.gmax). Typical value = -0,05.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroR.gmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroR.gmax

dy302c:GovHydroR.mwbase-valueRange

Path: cim:GovHydroR.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.pmin-valueRangePair

Path: cim:GovHydroR.pmin
Minimum gate opening, PU of MWbase (Pmin) (< GovHydroR.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroR.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroR.pmax

dy302c:GovHydroR.t1-valueRange

Path: cim:GovHydroR.t1
Lead time constant 1 (T1) (>= 0). Typical value = 1,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t2-valueRange

Path: cim:GovHydroR.t2
Lag time constant 1 (T2) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t3-valueRange

Path: cim:GovHydroR.t3
Lead time constant 2 (T3) (>= 0). Typical value = 1,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t4-valueRange

Path: cim:GovHydroR.t4
Lag time constant 2 (T4) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t5-valueRange

Path: cim:GovHydroR.t5
Lead time constant 3 (T5) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t6-valueRange

Path: cim:GovHydroR.t6
Lag time constant 3 (T6) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t7-valueRange

Path: cim:GovHydroR.t7
Lead time constant 4 (T7) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.t8-valueRange

Path: cim:GovHydroR.t8
Lag time constant 4 (T8) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.td-valueRange

Path: cim:GovHydroR.td
Input filter time constant (Td) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.tp-valueRange

Path: cim:GovHydroR.tp
Gate servo time constant (Tp) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.tt-valueRange

Path: cim:GovHydroR.tt
Power feedback time constant (Tt) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroR.tw-valueRange

Path: cim:GovHydroR.tw
Water inertia time constant (Tw) (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroWEH

Nested Properties:

dy302c:GovHydroWEH.gmin-valueRangePair

Path: cim:GovHydroWEH.gmin
Minimum gate position (Gmin) (< GovHydroWEH.gmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroWEH.gmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroWEH.gmax

dy302c:GovHydroWEH.mwbase-valueRange

Path: cim:GovHydroWEH.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH.td-valueRange

Path: cim:GovHydroWEH.td
Derivative controller time constant (Td) (>= 0). Limits the derivative characteristic beyond a breakdown frequency to avoid amplification of high-frequency noise.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH.tdv-valueRange

Path: cim:GovHydroWEH.tdv
Distributive valve time lag time constant (Tdv) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH.tg-valueRange

Path: cim:GovHydroWEH.tg
Value to allow the distribution valve controller to advance beyond the gate movement rate limit (Tg) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH.tp-valueRange

Path: cim:GovHydroWEH.tp
Pilot valve time lag time constant (Tp) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH.tpe-valueRange

Path: cim:GovHydroWEH.tpe
Electrical power droop time constant (Tpe) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWEH.tw-valueRange

Path: cim:GovHydroWEH.tw
Water inertia time constant (Tw) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWPID

Severity: sh:Violation

Targets:

• targetClass: cim:GovHydroWPID

Nested Properties:

dy302c:GovHydroWPID.gatmin-valueRangePair

Path: cim:GovHydroWPID.gatmin
Gate opening limit minimum (Gatmin) (< GovHydroWPID.gatmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroWPID.gatmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroWPID.gatmax

dy302c:GovHydroWPID.mwbase-valueRange

Path: cim:GovHydroWPID.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWPID.pmin-valueRangePair

Path: cim:GovHydroWPID.pmin
Minimum power output (Pmin) (< GovHydroWPID.pmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroWPID.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroWPID.pmax

dy302c:GovHydroWPID.ta-valueRange

Path: cim:GovHydroWPID.ta
Controller time constant (Ta) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWPID.tb-valueRange

Path: cim:GovHydroWPID.tb
Gate servo time constant (Tb) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWPID.treg-valueRange

Path: cim:GovHydroWPID.treg
Speed detector time constant (Treg) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWPID.tw-valueRange

Path: cim:GovHydroWPID.tw
Water inertia time constant (Tw) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovHydroWPID.velmin-valueRangePair

Path: cim:GovHydroWPID.velmin
Maximum gate closing velocity (Velmin) (< GovHydroWPID.velmax). Unit = PU / s. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovHydroWPID.velmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovHydroWPID.velmax

dy302c:GovSteam0

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteam0

Nested Properties:

dy302c:GovSteam0.mwbase-valueRange

Path: cim:GovSteam0.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam0.t1-valueRange

Path: cim:GovSteam0.t1
Steam bowl time constant (T1) (> 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam0.t2-valueRange

Path: cim:GovSteam0.t2
Numerator time constant of T2/T3 block (T2) (>= 0). Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam0.t3-valueRange

Path: cim:GovSteam0.t3
Reheater time constant (T3) (> 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam0.vmin-valueRangePair

Path: cim:GovSteam0.vmin
Minimum valve position, PU of mwcap (Vmin) (< GovSteam0.vmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteam0.vmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteam0.vmax

dy302c:GovSteam1

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteam1

Nested Properties:

dy302c:GovSteam1.k-valueRange

Path: cim:GovSteam1.k
Governor gain (reciprocal of droop) (K) (> 0). Typical value = 25.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.mwbase-valueRange

Path: cim:GovSteam1.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.pmin-valueRangePair

Path: cim:GovSteam1.pmin
Minimum valve opening (Pmin) (>= 0 and < GovSteam1.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteam1.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteam1.pmax

dy302c:GovSteam1.t1-valueRange

Path: cim:GovSteam1.t1
Governor lag time constant (T1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.t2-valueRange

Path: cim:GovSteam1.t2
Governor lead time constant (T2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.t3-valueRange

Path: cim:GovSteam1.t3
Valve positioner time constant (T3) (> 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.t4-valueRange

Path: cim:GovSteam1.t4
Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.t5-valueRange

Path: cim:GovSteam1.t5
Time constant of second boiler pass (T5) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.t6-valueRange

Path: cim:GovSteam1.t6
Time constant of third boiler pass (T6) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.t7-valueRange

Path: cim:GovSteam1.t7
Time constant of fourth boiler pass (T7) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.uc-valueRange

Path: cim:GovSteam1.uc
Maximum valve closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam1.uo-valueRange

Path: cim:GovSteam1.uo
Maximum valve opening velocity (Uo) (> 0). Unit = PU / s. Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam2

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteam2

Nested Properties:

dy302c:GovSteam2.pmin-valueRangePair

Path: cim:GovSteam2.pmin
Minimum fuel flow (P_MIN) (< GovSteam2.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteam2.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteam2.pmax

dy302c:GovSteam2.t1-valueRange

Path: cim:GovSteam2.t1
Governor lag time constant (T₁) (> 0). Typical value = 0,45.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteam2.t2-valueRange

Path: cim:GovSteam2.t2
Governor lead time constant (T₂) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamBB

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamBB

Nested Properties:

dy302c:GovSteamBB.fcut-valueRange

Path: cim:GovSteamBB.fcut
Frequency deadband (f_cut) (>= 0). Typical value = 0,002.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamBB.kls-valueRange

Path: cim:GovSteamBB.kls
Gain (Kls) (> 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamBB.pmin-valueRangePair

Path: cim:GovSteamBB.pmin
Low power limit (Pmin) (< GovSteamBB.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamBB.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamBB.pmax

dy302c:GovSteamBB.td-valueRange

Path: cim:GovSteamBB.td
Time constant (Td) (> 0). Typical value = 1,0.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamBB.tn-valueRange

Path: cim:GovSteamBB.tn
Time constant (Tn) (> 0). Typical value = 1,0.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamCC

Nested Properties:

dy302c:GovSteamCC.mwbase-valueRange

Path: cim:GovSteamCC.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.rhp-valueRange

Path: cim:GovSteamCC.rhp
HP governor droop (Rhp) (> 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.rlp-valueRange

Path: cim:GovSteamCC.rlp
LP governor droop (Rlp) (> 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t1hp-valueRange

Path: cim:GovSteamCC.t1hp
HP governor time constant (T1hp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t1lp-valueRange

Path: cim:GovSteamCC.t1lp
LP governor time constant (T1lp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t3hp-valueRange

Path: cim:GovSteamCC.t3hp
HP turbine time constant (T3hp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t3lp-valueRange

Path: cim:GovSteamCC.t3lp
LP turbine time constant (T3lp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t4hp-valueRange

Path: cim:GovSteamCC.t4hp
HP turbine time constant (T4hp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t4lp-valueRange

Path: cim:GovSteamCC.t4lp
LP turbine time constant (T4lp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t5hp-valueRange

Path: cim:GovSteamCC.t5hp
HP reheater time constant (T5hp) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamCC.t5lp-valueRange

Path: cim:GovSteamCC.t5lp
LP reheater time constant (T5lp) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamEU

Nested Properties:

dy302c:GovSteamEU.mwbase-valueRange

Path: cim:GovSteamEU.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tb-valueRange

Path: cim:GovSteamEU.tb
Boiler time constant (Tb) (>= 0). Typical value = 100.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tdp-valueRange

Path: cim:GovSteamEU.tdp
Derivative time constant of the power controller (Tdp) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.ten-valueRange

Path: cim:GovSteamEU.ten
Electro hydraulic transducer (Ten) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tf-valueRange

Path: cim:GovSteamEU.tf
Frequency transducer time constant (Tf) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tfp-valueRange

Path: cim:GovSteamEU.tfp
Time constant of the power controller (Tfp) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.thp-valueRange

Path: cim:GovSteamEU.thp
High pressure (HP) time constant of the turbine (Thp) (>= 0). Typical value = 0,31.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tip-valueRange

Path: cim:GovSteamEU.tip
Integral time constant of the power controller (Tip) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tlp-valueRange

Path: cim:GovSteamEU.tlp
Low pressure (LP) time constant of the turbine (Tlp) (>= 0). Typical value = 0,45.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tp-valueRange

Path: cim:GovSteamEU.tp
Power transducer time constant (Tp) (>= 0). Typical value = 0,07.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.trh-valueRange

Path: cim:GovSteamEU.trh
Reheater time constant of the turbine (Trh) (>= 0). Typical value = 8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tvhp-valueRange

Path: cim:GovSteamEU.tvhp
Control valves servo time constant (Tvhp) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tvip-valueRange

Path: cim:GovSteamEU.tvip
Intercept valves servo time constant (Tvip) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.tw-valueRange

Path: cim:GovSteamEU.tw
Speed transducer time constant (Tw) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamEU.wfmin-valueRangePair

Path: cim:GovSteamEU.wfmin
Lower limit for frequency correction (Wfmin) (< GovSteamEU.wfmax). Typical value = -0,05.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamEU.wfmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamEU.wfmax

dy302c:GovSteamEU.wwmin-valueRangePair

Path: cim:GovSteamEU.wwmin
Lower limit for the speed governor frequency correction (Wwmin) (< GovSteamEU.wwmax). Typical value = -1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamEU.wwmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamEU.wwmax

dy302c:GovSteamFV2

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamFV2

Nested Properties:

dy302c:GovSteamFV2.mwbase-valueRange

Path: cim:GovSteamFV2.mwbase
Alternate base used instead of machine base in equipment model if necessary (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.t1-valueRange

Path: cim:GovSteamFV2.t1
Governor time constant (T1) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.t3-valueRange

Path: cim:GovSteamFV2.t3
Reheater time constant (T3) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.ta-valueRange

Path: cim:GovSteamFV2.ta
Time after initial time for valve to close (Ta) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.tb-valueRange

Path: cim:GovSteamFV2.tb
Time after initial time for valve to begin opening (Tb) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.tc-valueRange

Path: cim:GovSteamFV2.tc
Time after initial time for valve to become fully open (Tc) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.tt-valueRange

Path: cim:GovSteamFV2.tt
Time constant with which power falls off after intercept valve closure (Tt) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV2.vmin-valueRangePair

Path: cim:GovSteamFV2.vmin
(Vmin) (< GovSteamFV2.vmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamFV2.vmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamFV2.vmax

dy302c:GovSteamFV3

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamFV3

Nested Properties:

dy302c:GovSteamFV3.mwbase-valueRange

Path: cim:GovSteamFV3.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.pmin-valueRangePair

Path: cim:GovSteamFV3.pmin
Minimum valve opening, PU of MWbase (Pmin) (< GovSteamFV3.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamFV3.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamFV3.pmax

dy302c:GovSteamFV3.t1-valueRange

Path: cim:GovSteamFV3.t1
Governor lead time constant (T1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.t2-valueRange

Path: cim:GovSteamFV3.t2
Governor lag time constant (T2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.t3-valueRange

Path: cim:GovSteamFV3.t3
Valve positioner time constant (T3) (> 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.t4-valueRange

Path: cim:GovSteamFV3.t4
Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.t6-valueRange

Path: cim:GovSteamFV3.t6
Time constant of crossover or third boiler pass (T6) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.ta-valueRange

Path: cim:GovSteamFV3.ta
Time to close intercept valve (IV) (Ta) (>= 0). Typical value = 0,97.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.tb-valueRange

Path: cim:GovSteamFV3.tb
Time until IV starts to reopen (Tb) (>= 0). Typical value = 0,98.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV3.tc-valueRange

Path: cim:GovSteamFV3.tc
Time until IV is fully open (Tc) (>= 0). Typical value = 0,99.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamFV4

Nested Properties:

dy302c:GovSteamFV4.ta-valueRange

Path: cim:GovSteamFV4.ta
Control valves rate opening time (Ta) (>= 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tam-valueRange

Path: cim:GovSteamFV4.tam
Intercept valves rate opening time (Tam) (>= 0). Typical value = 0,8.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tc-valueRange

Path: cim:GovSteamFV4.tc
Control valves rate closing time (Tc) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tcm-valueRange

Path: cim:GovSteamFV4.tcm
Intercept valves rate closing time (Tcm) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tdc-valueRange

Path: cim:GovSteamFV4.tdc
Derivative time constant of pressure regulator (Tdc) (>= 0). Typical value = 90.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tf1-valueRange

Path: cim:GovSteamFV4.tf1
Time constant of fuel regulation (Tf1) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tf2-valueRange

Path: cim:GovSteamFV4.tf2
Time constant of steam chest (Tf2) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.thp-valueRange

Path: cim:GovSteamFV4.thp
High pressure (HP) time constant of the turbine (Thp) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tmp-valueRange

Path: cim:GovSteamFV4.tmp
Low pressure (LP) time constant of the turbine (Tmp) (>= 0). Typical value = 0,4.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.trh-valueRange

Path: cim:GovSteamFV4.trh
Reheater time constant of the turbine (Trh) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.tv-valueRange

Path: cim:GovSteamFV4.tv
Boiler time constant (Tv) (>= 0). Typical value = 60.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamFV4.ty-valueRange

Path: cim:GovSteamFV4.ty
Control valves servo time constant (Ty) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamIEEE1

Nested Properties:

dy302c:GovSteamIEEE1.k-valueRange

Path: cim:GovSteamIEEE1.k
Governor gain (reciprocal of droop) (K) (> 0). Typical value = 25.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.mwbase-valueRange

Path: cim:GovSteamIEEE1.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.pmin-valueRangePair

Path: cim:GovSteamIEEE1.pmin
Minimum valve opening (Pmin) (>= 0 and < GovSteamIEEE1.pmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamIEEE1.pmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamIEEE1.pmax

dy302c:GovSteamIEEE1.t1-valueRange

Path: cim:GovSteamIEEE1.t1
Governor lag time constant (T1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.t2-valueRange

Path: cim:GovSteamIEEE1.t2
Governor lead time constant (T2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.t3-valueRange

Path: cim:GovSteamIEEE1.t3
Valve positioner time constant (T3) (> 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.t4-valueRange

Path: cim:GovSteamIEEE1.t4
Inlet piping/steam bowl time constant (T4) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.t5-valueRange

Path: cim:GovSteamIEEE1.t5
Time constant of second boiler pass (T5) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.t6-valueRange

Path: cim:GovSteamIEEE1.t6
Time constant of third boiler pass (T6) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.t7-valueRange

Path: cim:GovSteamIEEE1.t7
Time constant of fourth boiler pass (T7) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.uc-valueRange

Path: cim:GovSteamIEEE1.uc
Maximum valve closing velocity (Uc) (< 0). Unit = PU / s. Typical value = -10.

Severity: sh:Violation

Messages:

• "The value is positive or zero."

Constraints:

• sh:MaxExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamIEEE1.uo-valueRange

Path: cim:GovSteamIEEE1.uo
Maximum valve opening velocity (Uo) (> 0). Unit = PU / s. Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO

Severity: sh:Violation

Targets:

• targetClass: cim:GovSteamSGO

Nested Properties:

dy302c:GovSteamSGO.mwbase-valueRange

Path: cim:GovSteamSGO.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO.pmin-valueRangePair

Path: cim:GovSteamSGO.pmin
Lower power limit (Pmin) (>= 0 and < GovSteamSGO.pmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than GovSteamSGO.pmax; or negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:GovSteamSGO.pmax

dy302c:GovSteamSGO.t1-valueRange

Path: cim:GovSteamSGO.t1
Controller lag (T1) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO.t2-valueRange

Path: cim:GovSteamSGO.t2
Controller lead compensation (T2) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO.t3-valueRange

Path: cim:GovSteamSGO.t3
Governor lag (T3) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO.t4-valueRange

Path: cim:GovSteamSGO.t4
Delay due to steam inlet volumes associated with steam chest and inlet piping (T4) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO.t5-valueRange

Path: cim:GovSteamSGO.t5
Reheater delay including hot and cold leads (T5) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:GovSteamSGO.t6-valueRange

Path: cim:GovSteamSGO.t6
Delay due to IP-LP turbine, crossover pipes and LP end hoods (T6) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadComposite

Severity: sh:Violation

Targets:

• targetClass: cim:LoadComposite

Nested Properties:

dy302c:LoadComposite.h-valueRange

Path: cim:LoadComposite.h
Inertia constant (H) (>= 0). Typical value = 2,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadComposite.pfrac-valueRange

Path: cim:LoadComposite.pfrac
Fraction of constant-power load to be represented by this motor model (P_FRAC) (>= 0,0 and <= 1,0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is outside the range [0,1]."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 1.0

dy302c:LoadGenericNonLinear

Severity: sh:Violation

Targets:

• targetClass: cim:LoadGenericNonLinear

Nested Properties:

dy302c:LoadGenericNonLinear.tp-valueRange

Path: cim:LoadGenericNonLinear.tp
Time constant of lag function of active power (T_P) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadGenericNonLinear.tq-valueRange

Path: cim:LoadGenericNonLinear.tq
Time constant of lag function of reactive power (T_Q) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadMotor

Severity: sh:Violation

Targets:

• targetClass: cim:LoadMotor

Nested Properties:

dy302c:LoadMotor.h-valueRange

Path: cim:LoadMotor.h
Inertia constant (H) (>= 0). Typical value = 0,4.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadMotor.pfrac-valueRange

Path: cim:LoadMotor.pfrac
Fraction of constant-power load to be represented by this motor model (Pfrac) (>= 0,0 and <= 1,0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is outside the range [0,1]."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 1.0

dy302c:LoadMotor.tbkr-valueRange

Path: cim:LoadMotor.tbkr
Circuit breaker operating time (Tbkr) (>= 0). Typical value = 0,08.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadMotor.tpo-valueRange

Path: cim:LoadMotor.tpo
Transient rotor time constant (Tpo) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadMotor.tppo-valueRange

Path: cim:LoadMotor.tppo
Subtransient rotor time constant (Tppo) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadMotor.tv-valueRange

Path: cim:LoadMotor.tv
Voltage trip pickup time (Tv) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:LoadStatic

Severity: sh:Violation

Targets:

• targetClass: cim:LoadStatic

dy302c:MechanicalLoadDynamics

MechanicalLoadDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics.

Severity: sh:Violation

Messages:

• "Required association to either SynchronousMachineDynamics or to AsynchronousMachineDynamics is missing."

Targets:

• targetClass: cim:MechanicalLoadUserDefined
• targetClass: cim:MechLoad1

Constraints:

• sh:XoneConstraintComponent (Severity: sh:Violation)
  • Shapes: [[{[cim:MechanicalLoadDynamics.AsynchronousMachineDynamics] sh:Violation sh:MinCountConstraintComponent map[MinCount:1]}] [{[cim:MechanicalLoadDynamics.SynchronousMachineDynamics] sh:Violation sh:MinCountConstraintComponent map[MinCount:1]}]]

dy302c:OverexcLim2

Severity: sh:Violation

Targets:

• targetClass: cim:OverexcLim2

Nested Properties:

dy302c:OverexcLim2.voimin-valueRangePair

Path: cim:OverexcLim2.voimin
Minimum error signal (V_OIMIN) (< OverexcLim2.voimax). Typical value = -9999.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than OverexcLim2.voimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:OverexcLim2.voimax

dy302c:OverexcLimX1

Severity: sh:Violation

Targets:

• targetClass: cim:OverexcLimX1

Nested Properties:

dy302c:OverexcLimX1.t1-valueRange

Path: cim:OverexcLimX1.t1
Time to trip the exciter at the low voltage point on the inverse time characteristic (TIME₁) (>= 0). Typical value = 120.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX1.t2-valueRange

Path: cim:OverexcLimX1.t2
Time to trip the exciter at the mid voltage point on the inverse time characteristic (TIME₂) (>= 0). Typical value = 40.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX1.t3-valueRange

Path: cim:OverexcLimX1.t3
Time to trip the exciter at the high voltage point on the inverse time characteristic (TIME₃) (>= 0). Typical value = 15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX1.vlow-valueRange

Path: cim:OverexcLimX1.vlow
Low voltage limit (V_LOW) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX2

Severity: sh:Violation

Targets:

• targetClass: cim:OverexcLimX2

Nested Properties:

dy302c:OverexcLimX2.t1-valueRange

Path: cim:OverexcLimX2.t1
Time to trip the exciter at the low voltage or current point on the inverse time characteristic (TIME₁) (>= 0). Typical value = 120.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX2.t2-valueRange

Path: cim:OverexcLimX2.t2
Time to trip the exciter at the mid voltage or current point on the inverse time characteristic (TIME₂) (>= 0). Typical value = 40.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX2.t3-valueRange

Path: cim:OverexcLimX2.t3
Time to trip the exciter at the high voltage or current point on the inverse time characteristic (TIME₃) (>= 0). Typical value = 15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:OverexcLimX2.vlow-valueRange

Path: cim:OverexcLimX2.vlow
Low voltage limit (V_LOW) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PFVArType1IEEEPFController

Severity: sh:Violation

Targets:

• targetClass: cim:PFVArType1IEEEPFController

Nested Properties:

dy302c:PFVArType1IEEEPFController.tpfc-valueRange

Path: cim:PFVArType1IEEEPFController.tpfc
PF controller time delay (T_PFC) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PFVArType1IEEEPFController.vvtmin-valueRangePair

Path: cim:PFVArType1IEEEPFController.vvtmin
Minimum machine terminal voltage needed to enable pf/var controller (V_VTMIN) (< PFVArType1IEEEPFController.vvtmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PFVArType1IEEEPFController.vvtmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PFVArType1IEEEPFController.vvtmax

dy302c:PFVArType1IEEEVArController

Severity: sh:Violation

Targets:

• targetClass: cim:PFVArType1IEEEVArController

Nested Properties:

dy302c:PFVArType1IEEEVArController.tvarc-valueRange

Path: cim:PFVArType1IEEEVArController.tvarc
Var controller time delay (T_VARC) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PFVArType1IEEEVArController.vvtmin-valueRangePair

Path: cim:PFVArType1IEEEVArController.vvtmin
Minimum machine terminal voltage needed to enable pf/var controller (V_VTMIN) (< PVFArType1IEEEVArController.vvtmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PVFArType1IEEEVArController.vvtmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PVFArType1IEEEVArController.vvtmax

dy302c:Pss1

Severity: sh:Violation

Targets:

• targetClass: cim:Pss1

Nested Properties:

dy302c:Pss1.t10-valueRange

Path: cim:Pss1.t10
Lead/lag time constant (T₁₀) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1.t5-valueRange

Path: cim:Pss1.t5
Washout (T₅) (>= 0). Typical value = 3,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1.t6-valueRange

Path: cim:Pss1.t6
Filter time constant (T₆) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1.t7-valueRange

Path: cim:Pss1.t7
Lead/lag time constant (T₇) (>= 0). If = 0, both blocks are bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1.t8-valueRange

Path: cim:Pss1.t8
Lead/lag time constant (T₈) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1.t9-valueRange

Path: cim:Pss1.t9
Lead/lag time constant (T₉) (>= 0). If = 0, both blocks are bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1.tpe-valueRange

Path: cim:Pss1.tpe
Electric power filter time constant (T_PE) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A

Severity: sh:Violation

Targets:

• targetClass: cim:Pss1A

Nested Properties:

dy302c:Pss1A.t1-valueRange

Path: cim:Pss1A.t1
Lead/lag time constant (T₁) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.t2-valueRange

Path: cim:Pss1A.t2
Lead/lag time constant (T₂) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.t3-valueRange

Path: cim:Pss1A.t3
Lead/lag time constant (T₃) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.t4-valueRange

Path: cim:Pss1A.t4
Lead/lag time constant (T₄) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.t5-valueRange

Path: cim:Pss1A.t5
Washout time constant (T₅) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.t6-valueRange

Path: cim:Pss1A.t6
Transducer time constant (T₆) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.tdelay-valueRange

Path: cim:Pss1A.tdelay
Time constant (Tdelay) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss1A.vrmin-valueRangePair

Path: cim:Pss1A.vrmin
Minimum stabilizer output (Vrmin) (< Pss1A.vrmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than Pss1A.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:Pss1A.vrmax

dy302c:Pss2B

Severity: sh:Violation

Targets:

• targetClass: cim:Pss2B

Nested Properties:

dy302c:Pss2B.t1-valueRange

Path: cim:Pss2B.t1
Lead/lag time constant (T₁) (>= 0). Typical value = 0,12.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t10-valueRange

Path: cim:Pss2B.t10
Lead/lag time constant (T₁₀) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t11-valueRange

Path: cim:Pss2B.t11
Lead/lag time constant (T₁₁) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t2-valueRange

Path: cim:Pss2B.t2
Lead/lag time constant (T₂) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t3-valueRange

Path: cim:Pss2B.t3
Lead/lag time constant (T₃) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t4-valueRange

Path: cim:Pss2B.t4
Lead/lag time constant (T₄) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t6-valueRange

Path: cim:Pss2B.t6
Time constant on signal #1 (T₆) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t7-valueRange

Path: cim:Pss2B.t7
Time constant on signal #2 (T₇) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t8-valueRange

Path: cim:Pss2B.t8
Lead of ramp tracking filter (T₈) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.t9-valueRange

Path: cim:Pss2B.t9
Lag of ramp tracking filter (T₉) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.ta-valueRange

Path: cim:Pss2B.ta
Lead constant (T_a) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.tb-valueRange

Path: cim:Pss2B.tb
Lag time constant (T_b) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.tw1-valueRange

Path: cim:Pss2B.tw1
First washout on signal #1 (T_w1) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.tw2-valueRange

Path: cim:Pss2B.tw2
Second washout on signal #1 (T_w2) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.tw3-valueRange

Path: cim:Pss2B.tw3
First washout on signal #2 (T_w3) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.tw4-valueRange

Path: cim:Pss2B.tw4
Second washout on signal #2 (T_w4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2B.vsi1min-valueRangePair

Path: cim:Pss2B.vsi1min
Input signal #1 minimum limit (Vsi1min) (< Pss2B.vsi1max). Typical value = -2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than Pss2B.vsi1max."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:Pss2B.vsi1max

dy302c:Pss2B.vsi2min-valueRangePair

Path: cim:Pss2B.vsi2min
Input signal #2 minimum limit (Vsi2min) (< Pss2B.vsi2max). Typical value = -2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than Pss2B.vsi2max."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:Pss2B.vsi2max

dy302c:Pss2B.vstmin-valueRangePair

Path: cim:Pss2B.vstmin
Stabilizer output minimum limit (Vstmin) (< Pss2B.vstmax). Typical value = -0,1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than Pss2B.vstmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:Pss2B.vstmax

dy302c:Pss2ST

Severity: sh:Violation

Targets:

• targetClass: cim:Pss2ST

Nested Properties:

dy302c:Pss2ST.inputSignal1Type-allowedValues

Path: cim:Pss2ST.inputSignal1Type
Type of input signal #1 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative). Typical value = rotorAngularFrequencyDeviation.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal #1."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.busVoltage cim:InputSignalKind.generatorElectricalPower cim:InputSignalKind.generatorAcceleratingPower cim:InputSignalKind.busVoltageDerivative cim:InputSignalKind.rotorAngularFrequencyDeviation cim:InputSignalKind.busFrequencyDeviation]

dy302c:Pss2ST.inputSignal2Type-allowedValues

Path: cim:Pss2ST.inputSignal2Type
Type of input signal #2 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative - shall be different than Pss2ST.inputSignal1Type). Typical value = busVoltageDerivative.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal #2."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.busVoltage cim:InputSignalKind.generatorElectricalPower cim:InputSignalKind.generatorAcceleratingPower cim:InputSignalKind.busVoltageDerivative cim:InputSignalKind.rotorAngularFrequencyDeviation cim:InputSignalKind.busFrequencyDeviation]

dy302c:Pss2ST.lsmin-valueRangePair

Path: cim:Pss2ST.lsmin
Limiter (L_SMIN) (< Pss2ST.lsmax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than Pss2ST.lsmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:Pss2ST.lsmax

dy302c:Pss2ST.t1-valueRange

Path: cim:Pss2ST.t1
Time constant (T₁) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t10-valueRange

Path: cim:Pss2ST.t10
Time constant (T₁₀) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t2-valueRange

Path: cim:Pss2ST.t2
Time constant (T₂) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t3-valueRange

Path: cim:Pss2ST.t3
Time constant (T₃) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t4-valueRange

Path: cim:Pss2ST.t4
Time constant (T₄) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t5-valueRange

Path: cim:Pss2ST.t5
Time constant (T₅) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t6-valueRange

Path: cim:Pss2ST.t6
Time constant (T₆) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t7-valueRange

Path: cim:Pss2ST.t7
Time constant (T₇) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t8-valueRange

Path: cim:Pss2ST.t8
Time constant (T₈) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss2ST.t9-valueRange

Path: cim:Pss2ST.t9
Time constant (T₉) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5

Severity: sh:Violation

Targets:

• targetClass: cim:Pss5

Nested Properties:

dy302c:Pss5.tl1-valueRange

Path: cim:Pss5.tl1
Lead/lag time constant (T_L1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5.tl2-valueRange

Path: cim:Pss5.tl2
Lead/lag time constant (T_L2) (>= 0). If = 0, both blocks are bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5.tl3-valueRange

Path: cim:Pss5.tl3
Lead/lag time constant (T_L3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5.tl4-valueRange

Path: cim:Pss5.tl4
Lead/lag time constant (T_L4) (>= 0). If = 0, both blocks are bypassed. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5.tpe-valueRange

Path: cim:Pss5.tpe
Electric power filter time constant (T_PE) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5.tw1-valueRange

Path: cim:Pss5.tw1
First washout (T_W1) (>= 0). Typical value = 3,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:Pss5.tw2-valueRange

Path: cim:Pss5.tw2
Second washout (T_W2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssELIN2

Severity: sh:Violation

Targets:

• targetClass: cim:PssELIN2

Nested Properties:

dy302c:PssELIN2.ppss-valueRange

Path: cim:PssELIN2.ppss
Coefficient (p_PSS) (>= 0 and <= 4). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is outside the range [0,4]."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0
• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 4.0

dy302c:PssELIN2.ts1-valueRange

Path: cim:PssELIN2.ts1
Time constant (Ts1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssELIN2.ts2-valueRange

Path: cim:PssELIN2.ts2
Time constant (Ts2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssELIN2.ts3-valueRange

Path: cim:PssELIN2.ts3
Time constant (Ts3) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssELIN2.ts4-valueRange

Path: cim:PssELIN2.ts4
Time constant (Ts4) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssELIN2.ts5-valueRange

Path: cim:PssELIN2.ts5
Time constant (Ts5) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssELIN2.ts6-valueRange

Path: cim:PssELIN2.ts6
Time constant (Ts6) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A

Severity: sh:Violation

Targets:

• targetClass: cim:PssIEEE1A

Nested Properties:

dy302c:PssIEEE1A.inputSignalType-allowedValues

Path: cim:PssIEEE1A.inputSignalType
Type of input signal (rotorAngularFrequencyDeviation, generatorElectricalPower, or busFrequencyDeviation). Typical value = rotorAngularFrequencyDeviation.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.generatorElectricalPower cim:InputSignalKind.rotorAngularFrequencyDeviation cim:InputSignalKind.busFrequencyDeviation]

dy302c:PssIEEE1A.t1-valueRange

Path: cim:PssIEEE1A.t1
Lead/lag time constant (T1) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A.t2-valueRange

Path: cim:PssIEEE1A.t2
Lead/lag time constant (T2) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A.t3-valueRange

Path: cim:PssIEEE1A.t3
Lead/lag time constant (T3) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A.t4-valueRange

Path: cim:PssIEEE1A.t4
Lead/lag time constant (T4) (>= 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A.t5-valueRange

Path: cim:PssIEEE1A.t5
Washout time constant (T5) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A.t6-valueRange

Path: cim:PssIEEE1A.t6
Transducer time constant (T6) (>= 0). Typical value = 0,01.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE1A.vrmin-valueRangePair

Path: cim:PssIEEE1A.vrmin
Minimum stabilizer output (Vrmin) (< PssIEEE1A.vrmax). Typical value = -0,05.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE1A.vrmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE1A.vrmax

dy302c:PssIEEE2B

Severity: sh:Violation

Targets:

• targetClass: cim:PssIEEE2B

Nested Properties:

dy302c:PssIEEE2B.inputSignal1Type-allowedValues

Path: cim:PssIEEE2B.inputSignal1Type
Type of input signal #1 (rotorAngularFrequencyDeviation, busFrequencyDeviation). Typical value = rotorAngularFrequencyDeviation.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal #1."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.rotorAngularFrequencyDeviation cim:InputSignalKind.busFrequencyDeviation]

dy302c:PssIEEE2B.inputSignal2Type-allowedValues

Path: cim:PssIEEE2B.inputSignal2Type
Type of input signal #2 (generatorElectricalPower). Typical value = generatorElectricalPower.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal #2."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.generatorElectricalPower]

dy302c:PssIEEE2B.t1-valueRange

Path: cim:PssIEEE2B.t1
Lead/lag time constant (T1) (>= 0). Typical value = 0,12.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t10-valueRange

Path: cim:PssIEEE2B.t10
Lead/lag time constant (T10) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t11-valueRange

Path: cim:PssIEEE2B.t11
Lead/lag time constant (T11) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t2-valueRange

Path: cim:PssIEEE2B.t2
Lead/lag time constant (T2) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t3-valueRange

Path: cim:PssIEEE2B.t3
Lead/lag time constant (T3) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t4-valueRange

Path: cim:PssIEEE2B.t4
Lead/lag time constant (T4) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t6-valueRange

Path: cim:PssIEEE2B.t6
Time constant on signal #1 (T6) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t7-valueRange

Path: cim:PssIEEE2B.t7
Time constant on signal #2 (T7) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t8-valueRange

Path: cim:PssIEEE2B.t8
Lead of ramp tracking filter (T8) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.t9-valueRange

Path: cim:PssIEEE2B.t9
Lag of ramp tracking filter (T9) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.tw1-valueRange

Path: cim:PssIEEE2B.tw1
First washout on signal #1 (Tw1) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.tw2-valueRange

Path: cim:PssIEEE2B.tw2
Second washout on signal #1 (Tw2) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.tw3-valueRange

Path: cim:PssIEEE2B.tw3
First washout on signal #2 (Tw3) (>= 0). Typical value = 2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.tw4-valueRange

Path: cim:PssIEEE2B.tw4
Second washout on signal #2 (Tw4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE2B.vsi1min-valueRangePair

Path: cim:PssIEEE2B.vsi1min
Input signal #1 minimum limit (Vsi1min) (< PssIEEE2B.vsi1max). Typical value = -2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE2B.vsi1max."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE2B.vsi1max

dy302c:PssIEEE2B.vsi2min-valueRangePair

Path: cim:PssIEEE2B.vsi2min
Input signal #2 minimum limit (Vsi2min) (< PssIEEE2B.vsi2max). Typical value = -2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE2B.vsi2max."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE2B.vsi2max

dy302c:PssIEEE2B.vstmin-valueRangePair

Path: cim:PssIEEE2B.vstmin
Stabilizer output minimum limit (Vstmin) (< PssIEEE2B.vstmax). Typical value = -0,1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE2B.vstmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE2B.vstmax

dy302c:PssIEEE3B

Severity: sh:Violation

Targets:

• targetClass: cim:PssIEEE3B

Nested Properties:

dy302c:PssIEEE3B.t1-valueRange

Path: cim:PssIEEE3B.t1
Transducer time constant (T1) (>= 0). Typical value = 0,012.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE3B.t2-valueRange

Path: cim:PssIEEE3B.t2
Transducer time constant (T2) (>= 0). Typical value = 0,012.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE3B.tw1-valueRange

Path: cim:PssIEEE3B.tw1
Washout time constant (Tw1) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE3B.tw2-valueRange

Path: cim:PssIEEE3B.tw2
Washout time constant (Tw2) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE3B.tw3-valueRange

Path: cim:PssIEEE3B.tw3
Washout time constant (Tw3) (>= 0). Typical value = 0,6.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE3B.vstmin-valueRangePair

Path: cim:PssIEEE3B.vstmin
Stabilizer output minimum limit (Vstmin) (< PssIEEE3B.vstmax). Typical value = -0,1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE3B.vstmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE3B.vstmax

dy302c:PssIEEE4B

Severity: sh:Violation

Targets:

• targetClass: cim:PssIEEE4B

Nested Properties:

dy302c:PssIEEE4B.th1-valueRange

Path: cim:PssIEEE4B.th1
High band time constant (T_H1) (>= 0). Typical value = 0,01513.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th10-valueRange

Path: cim:PssIEEE4B.th10
High band time constant (T_H10) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th11-valueRange

Path: cim:PssIEEE4B.th11
High band time constant (T_H11) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th12-valueRange

Path: cim:PssIEEE4B.th12
High band time constant (T_H12) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th2-valueRange

Path: cim:PssIEEE4B.th2
High band time constant (T_H2) (>= 0). Typical value = 0,01816.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th3-valueRange

Path: cim:PssIEEE4B.th3
High band time constant (T_H3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th4-valueRange

Path: cim:PssIEEE4B.th4
High band time constant (T_H4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th5-valueRange

Path: cim:PssIEEE4B.th5
High band time constant (T_H5) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th6-valueRange

Path: cim:PssIEEE4B.th6
High band time constant (T_H6) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th7-valueRange

Path: cim:PssIEEE4B.th7
High band time constant (T_H7) (>= 0). Typical value = 0,01816.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th8-valueRange

Path: cim:PssIEEE4B.th8
High band time constant (T_H8) (>= 0). Typical value = 0,02179.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.th9-valueRange

Path: cim:PssIEEE4B.th9
High band time constant (T_H9) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti1-valueRange

Path: cim:PssIEEE4B.ti1
Intermediate band time constant (T_I1) (>= 0). Typical value = 0,173.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti10-valueRange

Path: cim:PssIEEE4B.ti10
Intermediate band time constant (T_I10) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti11-valueRange

Path: cim:PssIEEE4B.ti11
Intermediate band time constant (T_I11) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti12-valueRange

Path: cim:PssIEEE4B.ti12
Intermediate band time constant (T_I12) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti2-valueRange

Path: cim:PssIEEE4B.ti2
Intermediate band time constant (T_I2) (>= 0). Typical value = 0,2075.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti3-valueRange

Path: cim:PssIEEE4B.ti3
Intermediate band time constant (T_I3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti4-valueRange

Path: cim:PssIEEE4B.ti4
Intermediate band time constant (T_I4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti5-valueRange

Path: cim:PssIEEE4B.ti5
Intermediate band time constant (T_I5) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti6-valueRange

Path: cim:PssIEEE4B.ti6
Intermediate band time constant (T_I6) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti7-valueRange

Path: cim:PssIEEE4B.ti7
Intermediate band time constant (T_I7) (>= 0). Typical value = 0,2075.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti8-valueRange

Path: cim:PssIEEE4B.ti8
Intermediate band time constant (T_I8) (>= 0). Typical value = 0,2491.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.ti9-valueRange

Path: cim:PssIEEE4B.ti9
Intermediate band time constant (T_I9) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl1-valueRange

Path: cim:PssIEEE4B.tl1
Low band time constant (T_L1) (>= 0). Typical value = 1,73.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl10-valueRange

Path: cim:PssIEEE4B.tl10
Low band time constant (T_L10) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl11-valueRange

Path: cim:PssIEEE4B.tl11
Low band time constant (T_L11) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl12-valueRange

Path: cim:PssIEEE4B.tl12
Low band time constant (T_L12) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl2-valueRange

Path: cim:PssIEEE4B.tl2
Low band time constant (T_L2) (>= 0). Typical value = 2,075.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl3-valueRange

Path: cim:PssIEEE4B.tl3
Low band time constant (T_L3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl4-valueRange

Path: cim:PssIEEE4B.tl4
Low band time constant (T_L4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl5-valueRange

Path: cim:PssIEEE4B.tl5
Low band time constant (T_L5) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl6-valueRange

Path: cim:PssIEEE4B.tl6
Low band time constant (T_L6) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl7-valueRange

Path: cim:PssIEEE4B.tl7
Low band time constant (T_L7) (>= 0). Typical value = 2,075.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl8-valueRange

Path: cim:PssIEEE4B.tl8
Low band time constant (T_L8) (>= 0). Typical value = 2,491.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.tl9-valueRange

Path: cim:PssIEEE4B.tl9
Low band time constant (T_L9) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssIEEE4B.vhmin-valueRangePair

Path: cim:PssIEEE4B.vhmin
High band output minimum limit (V_Hmin) (< PssIEEE4V.vhmax). Typical value = -0,6.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE4V.vhmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE4V.vhmax

dy302c:PssIEEE4B.vimin-valueRangePair

Path: cim:PssIEEE4B.vimin
Intermediate band output minimum limit (V_Imin) (< PssIEEE4B.vimax). Typical value = -0,6.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE4B.vimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE4B.vimax

dy302c:PssIEEE4B.vlmin-valueRangePair

Path: cim:PssIEEE4B.vlmin
Low band output minimum limit (V_Lmin) (< PssIEEE4B.vlmax). Typical value = -0,075.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE4B.vlmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE4B.vlmax

dy302c:PssIEEE4B.vstmin-valueRangePair

Path: cim:PssIEEE4B.vstmin
PSS output minimum limit (V_STmin) (< PssIEEE4B.vstmax). Typical value = -0,15.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssIEEE4B.vstmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssIEEE4B.vstmax

dy302c:PssPTIST1

Severity: sh:Violation

Targets:

• targetClass: cim:PssPTIST1

Nested Properties:

dy302c:PssPTIST1.dtc-valueRange

Path: cim:PssPTIST1.dtc
Time step related to activation of controls (deltatc) (>= 0). Typical value = 0,025.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.dtf-valueRange

Path: cim:PssPTIST1.dtf
Time step frequency calculation (deltatf) (>= 0). Typical value = 0,025.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.dtp-valueRange

Path: cim:PssPTIST1.dtp
Time step active power calculation (deltatp) (>= 0). Typical value = 0,0125.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.t1-valueRange

Path: cim:PssPTIST1.t1
Time constant (T1) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.t2-valueRange

Path: cim:PssPTIST1.t2
Time constant (T2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.t3-valueRange

Path: cim:PssPTIST1.t3
Time constant (T3) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.t4-valueRange

Path: cim:PssPTIST1.t4
Time constant (T4) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.tf-valueRange

Path: cim:PssPTIST1.tf
Time constant (Tf) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST1.tp-valueRange

Path: cim:PssPTIST1.tp
Time constant (Tp) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3

Severity: sh:Violation

Targets:

• targetClass: cim:PssPTIST3

Nested Properties:

dy302c:PssPTIST3.dtc-valueRange

Path: cim:PssPTIST3.dtc
Time step related to activation of controls (deltatc) (>= 0). Typical value = 0,025 (0,03 for 50 Hz).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.dtf-valueRange

Path: cim:PssPTIST3.dtf
Time step frequency calculation (deltatf) (>= 0). Typical value = 0,025 (0,03 for 50 Hz).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.dtp-valueRange

Path: cim:PssPTIST3.dtp
Time step active power calculation (deltatp) (>= 0). Typical value = 0,0125 (0,015 for 50 Hz).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.nav-valueRange

Path: cim:PssPTIST3.nav
Number of control outputs to average (NAV) (1 <= NAV <= 16). Typical value = 4.

Severity: sh:Violation

Messages:

• "The value is outside the range [1,16]."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 1.0
• sh:MaxInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 16.0

dy302c:PssPTIST3.ncl-valueRange

Path: cim:PssPTIST3.ncl
Number of counts at limit to active limit function (NCL) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.t1-valueRange

Path: cim:PssPTIST3.t1
Time constant (T1) (>= 0). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.t2-valueRange

Path: cim:PssPTIST3.t2
Time constant (T2) (>= 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.t3-valueRange

Path: cim:PssPTIST3.t3
Time constant (T3) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.t4-valueRange

Path: cim:PssPTIST3.t4
Time constant (T4) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.t5-valueRange

Path: cim:PssPTIST3.t5
Time constant (T5) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.t6-valueRange

Path: cim:PssPTIST3.t6
Time constant (T6) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.tf-valueRange

Path: cim:PssPTIST3.tf
Time constant (Tf) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssPTIST3.tp-valueRange

Path: cim:PssPTIST3.tp
Time constant (Tp) (>= 0). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssRQB

Severity: sh:Violation

Targets:

• targetClass: cim:PssRQB

Nested Properties:

dy302c:PssRQB.t4f-valueRange

Path: cim:PssRQB.t4f
Lead lag time constant (T4F) (>= 0). Typical value = 0,045.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssRQB.t4m-valueRange

Path: cim:PssRQB.t4m
Input time constant (T4M) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssRQB.t4mom-valueRange

Path: cim:PssRQB.t4mom
Speed time constant (T4MOM) (>= 0). Typical value = 1,27.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssRQB.tomd-valueRange

Path: cim:PssRQB.tomd
Speed delay (TOMD) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssRQB.tomsl-valueRange

Path: cim:PssRQB.tomsl
Speed time constant (TOMSL) (>= 0). Typical value = 0,04.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4

Severity: sh:Violation

Targets:

• targetClass: cim:PssSB4

Nested Properties:

dy302c:PssSB4.ta-valueRange

Path: cim:PssSB4.ta
Time constant (Ta) (>= 0). Typical value = 0,37.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.tb-valueRange

Path: cim:PssSB4.tb
Time constant (Tb) (>= 0). Typical value = 0,37.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.tc-valueRange

Path: cim:PssSB4.tc
Time constant (Tc) (>= 0). Typical value = 0,035.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.td-valueRange

Path: cim:PssSB4.td
Time constant (Td) (>= 0). Typical value = 0,0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.te-valueRange

Path: cim:PssSB4.te
Time constant (Te) (>= 0). Typical value = 0,0169.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.tt-valueRange

Path: cim:PssSB4.tt
Time constant (Tt) (>= 0). Typical value = 0,18.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.tx1-valueRange

Path: cim:PssSB4.tx1
Reset time constant (Tx1) (>= 0). Typical value = 0,035.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.tx2-valueRange

Path: cim:PssSB4.tx2
Time constant (Tx2) (>= 0). Typical value = 5,0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSB4.vsmin-valueRangePair

Path: cim:PssSB4.vsmin
Limiter (Vsmin) (< PssSB4.vsmax). Typical value = -0,062.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssSB4.vsmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssSB4.vsmax

dy302c:PssSH

Severity: sh:Violation

Targets:

• targetClass: cim:PssSH

Nested Properties:

dy302c:PssSH.t1-valueRange

Path: cim:PssSH.t1
Time constant 1 (T1) (> 0). Typical value = 0,076.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSH.t2-valueRange

Path: cim:PssSH.t2
Time constant 2 (T2) (> 0). Typical value = 0,086.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSH.t3-valueRange

Path: cim:PssSH.t3
Time constant 3 (T3) (> 0). Typical value = 1,068.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSH.t4-valueRange

Path: cim:PssSH.t4
Time constant 4 (T4) (> 0). Typical value = 1,913.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSH.td-valueRange

Path: cim:PssSH.td
Input time constant (T_d) (>= 0). Typical value = 10.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssSH.vsmin-valueRangePair

Path: cim:PssSH.vsmin
Output minimum limit (Vsmin) (< PssSH.vsmax). Typical value = -0,1.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssSH.vsmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssSH.vsmax

dy302c:PssSK

Severity: sh:Violation

Targets:

• targetClass: cim:PssSK

Nested Properties:

dy302c:PssSK.t1-valueRange

Path: cim:PssSK.t1
Denominator time constant (T₁) (> 0,005). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is less than or equal to 0.005."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.005

dy302c:PssSK.t2-valueRange

Path: cim:PssSK.t2
Filter time constant (T₂) (> 0,005). Typical value = 0,35.

Severity: sh:Violation

Messages:

• "The value is less than or equal to 0.005."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.005

dy302c:PssSK.t3-valueRange

Path: cim:PssSK.t3
Denominator time constant (T₃) (> 0,005). Typical value = 0,22.

Severity: sh:Violation

Messages:

• "The value is less than or equal to 0.005."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.005

dy302c:PssSK.t4-valueRange

Path: cim:PssSK.t4
Filter time constant (T₄) (> 0,005). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is less than or equal to 0.005."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.005

dy302c:PssSK.t5-valueRange

Path: cim:PssSK.t5
Denominator time constant (T₅) (> 0,005). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is less than or equal to 0.005."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.005

dy302c:PssSK.t6-valueRange

Path: cim:PssSK.t6
Filter time constant (T₆) (> 0,005). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is less than or equal to 0.005."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.005

dy302c:PssSK.vsmin-valueRangePair

Path: cim:PssSK.vsmin
Stabilizer output minimum limit (V_SMIN) (< PssSK.vsmax). Typical value = -0.4.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssSK.vsmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssSK.vsmax

dy302c:PssWECC

Severity: sh:Violation

Targets:

• targetClass: cim:PssWECC

Nested Properties:

dy302c:PssWECC.inputSignal1Type-allowedValues

Path: cim:PssWECC.inputSignal1Type
Type of input signal #1 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, or busVoltageDerivative). Typical value = rotorAngularFrequencyDeviation.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal #1."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.busVoltage cim:InputSignalKind.generatorElectricalPower cim:InputSignalKind.generatorAcceleratingPower cim:InputSignalKind.busVoltageDerivative cim:InputSignalKind.rotorAngularFrequencyDeviation cim:InputSignalKind.busFrequencyDeviation]

dy302c:PssWECC.inputSignal2Type-allowedValues

Path: cim:PssWECC.inputSignal2Type
Type of input signal #2 (rotorAngularFrequencyDeviation, busFrequencyDeviation, generatorElectricalPower, generatorAcceleratingPower, busVoltage, busVoltageDerivative - shall be different than PssWECC.inputSignal1Type). Typical value = busVoltageDerivative.

Severity: sh:Violation

Messages:

• "Not allowed value for input signal #2."

Constraints:

• sh:InConstraintComponent (Severity: sh:Violation)
  • Values: [cim:InputSignalKind.busVoltage cim:InputSignalKind.generatorElectricalPower cim:InputSignalKind.generatorAcceleratingPower cim:InputSignalKind.busVoltageDerivative cim:InputSignalKind.rotorAngularFrequencyDeviation cim:InputSignalKind.busFrequencyDeviation]

dy302c:PssWECC.t1-valueRange

Path: cim:PssWECC.t1
Input signal 1 transducer time constant (T₁) (>= 0). Typical value = 0,037.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t10-valueRange

Path: cim:PssWECC.t10
Lag time constant (T₁₀) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t2-valueRange

Path: cim:PssWECC.t2
Input signal 2 transducer time constant (T₂) (>= 0). Typical value = 0,0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t3-valueRange

Path: cim:PssWECC.t3
Stabilizer washout time constant (T₃) (>= 0). Typical value = 9,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t4-valueRange

Path: cim:PssWECC.t4
Stabilizer washout time lag constant (T₄) (>= 0). Typical value = 9,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t5-valueRange

Path: cim:PssWECC.t5
Lead time constant (T₅) (>= 0). Typical value = 1,7.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t6-valueRange

Path: cim:PssWECC.t6
Lag time constant (T₆) (>= 0). Typical value = 1,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t7-valueRange

Path: cim:PssWECC.t7
Lead time constant (T₇) (>= 0). Typical value = 1,7.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t8-valueRange

Path: cim:PssWECC.t8
Lag time constant (T₈) (>= 0). Typical value = 1,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.t9-valueRange

Path: cim:PssWECC.t9
Lead time constant (T₉) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:PssWECC.vsmin-valueRangePair

Path: cim:PssWECC.vsmin
Minimum output signal (Vsmin) (< PssWECC.vsmax). Typical value = -0,05.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than PssWECC.vsmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:PssWECC.vsmax

dy302c:RotatingMachineDynamics

Severity: sh:Violation

Targets:

• targetClass: cim:SynchronousMachineEquivalentCircuit
• targetClass: cim:AsynchronousMachineUserDefined
• targetClass: cim:AsynchronousMachineTimeConstantReactance
• targetClass: cim:AsynchronousMachineEquivalentCircuit
• targetClass: cim:SynchronousMachineUserDefined
• targetClass: cim:SynchronousMachineTimeConstantReactance

dy302c:SynchronousMachineEquivalentCircuit

Severity: sh:Violation

Targets:

• targetClass: cim:SynchronousMachineEquivalentCircuit

Nested Properties:

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineDetailed.efdBaseRatio-valueRange

Path: cim:SynchronousMachineDetailed.efdBaseRatio
Ratio (exciter voltage/generator voltage) of Efd bases of exciter and generator models (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineDetailed.saturationFactorQAxis-valueRange

Path: cim:SynchronousMachineDetailed.saturationFactorQAxis
Quadrature-axis saturation factor at rated terminal voltage (S1q) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineSimplified

Severity: sh:Violation

Targets:

• targetClass: cim:SynchronousMachineSimplified

Nested Properties:

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance

Severity: sh:Violation

Targets:

• targetClass: cim:SynchronousMachineTimeConstantReactance

Nested Properties:

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineDetailed.efdBaseRatio-valueRange

Path: cim:SynchronousMachineDetailed.efdBaseRatio
Ratio (exciter voltage/generator voltage) of Efd bases of exciter and generator models (> 0). Typical value = 1.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineDetailed.saturationFactorQAxis-valueRange

Path: cim:SynchronousMachineDetailed.saturationFactorQAxis
Quadrature-axis saturation factor at rated terminal voltage (S1q) (>= 0). Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.ks-valueRange

Path: cim:SynchronousMachineTimeConstantReactance.ks
Saturation loading correction factor (Ks) (>= 0). Used only by type J model. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.tc-valueRange

Path: cim:SynchronousMachineTimeConstantReactance.tc
Damping time constant for “Canay” reactance (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.tppdo-valueRange

Path: cim:SynchronousMachineTimeConstantReactance.tppdo
Direct-axis subtransient rotor time constant (T''do) (> 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.tpdo-valueRangePair

Path: cim:SynchronousMachineTimeConstantReactance.tppdo
Direct-axis transient rotor time constant (T'do) (> SynchronousMachineTimeConstantReactance.tppdo). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.tpdo."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.tpdo

dy302c:SynchronousMachineTimeConstantReactance.tppqo-valueRange

Path: cim:SynchronousMachineTimeConstantReactance.tppqo
Quadrature-axis subtransient rotor time constant (T''qo) (> 0). Typical value = 0,03.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.tpqo-valueRangePair

Path: cim:SynchronousMachineTimeConstantReactance.tppqo
Quadrature-axis transient rotor time constant (T'qo) (> SynchronousMachineTimeConstantReactance.tppqo). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.tpqo."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.tpqo

dy302c:SynchronousMachineTimeConstantReactance.xDirectTrans-valueRangePair

Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans
Direct-axis transient reactance (unsaturated) (X'd) (>= SynchronousMachineTimeConstantReactance.xDirectSubtrans). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is greater than SynchronousMachineTimeConstantReactance.xDirectTrans."

Constraints:

• sh:LessThanOrEqualsConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectTrans

dy302c:SynchronousMachineTimeConstantReactance.xDirectSync-valueRangePair

Path: cim:SynchronousMachineTimeConstantReactance.xDirectTrans
Direct-axis synchronous reactance (Xd) (>= SynchronousMachineTimeConstantReactance.xDirectTrans). The quotient of a sustained value of that AC component of armature voltage that is produced by the total direct-axis flux due to direct-axis armature current and the value of the AC component of this current, the machine running at rated speed. Typical value = 1,8.

Severity: sh:Violation

Messages:

• "The value is greater than SynchronousMachineTimeConstantReactance.xDirectSync."

Constraints:

• sh:LessThanOrEqualsConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSync

dy302c:SynchronousMachineTimeConstantReactance.xQuadTrans-valueRangePair

Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans
Quadrature-axis transient reactance (X'q) (>= SynchronousMachineTimeConstantReactance.xQuadSubtrans). Typical value = 0,3.

Severity: sh:Violation

Messages:

• "The value is greater than SynchronousMachineTimeConstantReactance.xQuadTrans."

Constraints:

• sh:LessThanOrEqualsConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadTrans

dy302c:SynchronousMachineTimeConstantReactance.xQuadSync-valueRangePair

Path: cim:SynchronousMachineTimeConstantReactance.xQuadTrans
Quadrature-axis synchronous reactance (Xq) (>= SynchronousMachineTimeConstantReactance.xQuadTrans). The ratio of the component of reactive armature voltage, due to the quadrature-axis component of armature current, to this component of current, under steady state conditions and at rated frequency. Typical value = 1,6.

Severity: sh:Violation

Messages:

• "The value is greater than SynchronousMachineTimeConstantReactance.xQuadSync."

Constraints:

• sh:LessThanOrEqualsConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSync

dy302c:SynchronousMachineUserDefined

Severity: sh:Violation

Targets:

• targetClass: cim:SynchronousMachineUserDefined

Nested Properties:

dy302c:RotatingMachineDynamics.damping-valueRange

Path: cim:RotatingMachineDynamics.damping
Damping torque coefficient (D) (>= 0). A proportionality constant that, when multiplied by the angular velocity of the rotor poles with respect to the magnetic field (frequency), results in the damping torque. This value is often zero when the sources of damping torques (generator damper windings, load damping effects, etc.) are modelled in detail. Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.inertia-valueRange

Path: cim:RotatingMachineDynamics.inertia
Inertia constant of generator or motor and mechanical load (H) (> 0). This is the specification for the stored energy in the rotating mass when operating at rated speed. For a generator, this includes the generator plus all other elements (turbine, exciter) on the same shaft and has units of MW x s. For a motor, it includes the motor plus its mechanical load. Conventional units are PU on the generator MVA base, usually expressed as MW x s / MVA or just s. This value is used in the accelerating power reference frame for operator training simulator solutions. Typical value = 3.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:RotatingMachineDynamics.saturationFactor-valueRange

Path: cim:RotatingMachineDynamics.saturationFactor
Saturation factor at rated terminal voltage (S1) (>= 0). Not used by simplified model. Defined by defined by S(E1) in the SynchronousMachineSaturationParameters diagram. Typical value = 0,02.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:SynchronousMachineTimeConstantReactance.xDirectSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Direct-axis subtransient reactance (unsaturated) (X''d) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xDirectSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xDirectSubtrans

dy302c:RotatingMachineDynamics.statorLeakageReactance-valueRange

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Stator leakage reactance (Xl) (>= 0). Typical value = 0,15.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:AsynchronousMachineTimeConstantReactance.xpp-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Subtransient reactance (unsaturated) (X'') (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than AsynchronousMachineTimeConstantReactance.xpp."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:AsynchronousMachineTimeConstantReactance.xpp

dy302c:SynchronousMachineTimeConstantReactance.xQuadSubtrans-valueRangePair

Path: cim:RotatingMachineDynamics.statorLeakageReactance
Quadrature-axis subtransient reactance (X''q) (> RotatingMachineDynamics.statorLeakageReactance). Typical value = 0,2.

Severity: sh:Violation

Messages:

• "The value is greater than or equal to SynchronousMachineTimeConstantReactance.xQuadSubtrans."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:SynchronousMachineTimeConstantReactance.xQuadSubtrans

dy302c:RotatingMachineDynamics.statorResistance-valueRange

Path: cim:RotatingMachineDynamics.statorResistance
Stator (armature) resistance (Rs) (>= 0). Typical value = 0,005.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:TurbLCFB1

Severity: sh:Violation

Targets:

• targetClass: cim:TurbLCFB1

Nested Properties:

dy302c:TurbLCFB1.mwbase-valueRange

Path: cim:TurbLCFB1.mwbase
Base for power values (MWbase) (> 0). Unit = MW.

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:TurbLCFB1.tpelec-valueRange

Path: cim:TurbLCFB1.tpelec
Power transducer time constant (Tpelec) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:TurbineGovernorDynamics

TurbineGovernorDynamics shall have either an association to SynchronousMachineDynamics or to AsynchronousMachineDynamics.

Severity: sh:Violation

Messages:

• "Required association to either SynchronousMachineDynamics or to AsynchronousMachineDynamics is missing."

Targets:

• targetClass: cim:GovGAST
• targetClass: cim:GovHydroFrancis
• targetClass: cim:GovHydroPelton
• targetClass: cim:GovSteamFV3
• targetClass: cim:GovSteamIEEE1
• targetClass: cim:GovSteam2
• targetClass: cim:GovSteamEU
• targetClass: cim:GovCT1
• targetClass: cim:TurbineGovernorUserDefined
• targetClass: cim:GovHydroIEEE2
• targetClass: cim:GovSteam1
• targetClass: cim:GovSteamFV2
• targetClass: cim:GovHydroPID2
• targetClass: cim:GovHydro4
• targetClass: cim:GovGAST2
• targetClass: cim:GovHydroWPID
• targetClass: cim:GovHydroIEEE0
• targetClass: cim:GovSteam0
• targetClass: cim:GovHydro1
• targetClass: cim:GovGAST3
• targetClass: cim:GovHydro3
• targetClass: cim:GovCT2
• targetClass: cim:GovHydroPID
• targetClass: cim:GovHydroDD
• targetClass: cim:GovHydroR
• targetClass: cim:GovGAST1
• targetClass: cim:GovGAST4
• targetClass: cim:GovSteamBB
• targetClass: cim:GovSteamFV4
• targetClass: cim:GovHydroWEH
• targetClass: cim:GovHydro2
• targetClass: cim:GovSteamSGO
• targetClass: cim:GovGASTWD

Constraints:

• sh:XoneConstraintComponent (Severity: sh:Violation)
  • Shapes: [[{[cim:TurbineGovernorDynamics.AsynchronousMachineDynamics] sh:Violation sh:MinCountConstraintComponent map[MinCount:1]}] [{[cim:TurbineGovernorDynamics.SynchronousMachineDynamics] sh:Violation sh:MinCountConstraintComponent map[MinCount:1]}]]

dy302c:UnderexcLim2Simplified

Severity: sh:Violation

Targets:

• targetClass: cim:UnderexcLim2Simplified

Nested Properties:

dy302c:UnderexcLim2Simplified.vuimin-valueRangePair

Path: cim:UnderexcLim2Simplified.vuimin
Minimum error signal (V_UIMIN) (< UnderexcLim2Simplified.vuimax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than UnderexcLim2Simplified.vuimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:UnderexcLim2Simplified.vuimax

dy302c:UnderexcLimIEEE1

Severity: sh:Violation

Targets:

• targetClass: cim:UnderexcLimIEEE1

Nested Properties:

dy302c:UnderexcLimIEEE1.tu1-valueRange

Path: cim:UnderexcLimIEEE1.tu1
UEL lead time constant (T_U1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE1.tu2-valueRange

Path: cim:UnderexcLimIEEE1.tu2
UEL lag time constant (T_U2) (>= 0). Typical value = 0,05.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE1.tu3-valueRange

Path: cim:UnderexcLimIEEE1.tu3
UEL lead time constant (T_U3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE1.tu4-valueRange

Path: cim:UnderexcLimIEEE1.tu4
UEL lag time constant (T_U4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE1.vuimin-valueRangePair

Path: cim:UnderexcLimIEEE1.vuimin
UEL integrator output minimum limit (V_UIMIN) (< UnderexcLimIEEE1.vuimax).

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than UnderexcLimIEEE1.vuimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:UnderexcLimIEEE1.vuimax

dy302c:UnderexcLimIEEE1.vulmin-valueRangePair

Path: cim:UnderexcLimIEEE1.vulmin
UEL output minimum limit (V_ULMIN) (< UnderexcLimIEEE1.vulmax). Typical value = -18.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than UnderexcLimIEEE1.vulmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:UnderexcLimIEEE1.vulmax

dy302c:UnderexcLimIEEE2

Severity: sh:Violation

Targets:

• targetClass: cim:UnderexcLimIEEE2

Nested Properties:

dy302c:UnderexcLimIEEE2.tu1-valueRange

Path: cim:UnderexcLimIEEE2.tu1
UEL lead time constant (T_U1) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tu2-valueRange

Path: cim:UnderexcLimIEEE2.tu2
UEL lag time constant (T_U2) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tu3-valueRange

Path: cim:UnderexcLimIEEE2.tu3
UEL lead time constant (T_U3) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tu4-valueRange

Path: cim:UnderexcLimIEEE2.tu4
UEL lag time constant (T_U4) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tul-valueRange

Path: cim:UnderexcLimIEEE2.tul
Time constant associated with optional integrator feedback input signal to UEL (T_UL) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tup-valueRange

Path: cim:UnderexcLimIEEE2.tup
Real power filter time constant (T_UP) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tuq-valueRange

Path: cim:UnderexcLimIEEE2.tuq
Reactive power filter time constant (T_UQ) (>= 0). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.tuv-valueRange

Path: cim:UnderexcLimIEEE2.tuv
Voltage filter time constant (T_UV) (>= 0). Typical value = 5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimIEEE2.vuimin-valueRangePair

Path: cim:UnderexcLimIEEE2.vuimin
UEL integrator output minimum limit (V_UIMIN) (< UnderexcLimIEEE2.vuimax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than UnderexcLimIEEE2.vuimax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:UnderexcLimIEEE2.vuimax

dy302c:UnderexcLimIEEE2.vulmin-valueRangePair

Path: cim:UnderexcLimIEEE2.vulmin
UEL output minimum limit (V_ULMIN) (< UnderexcLimIEEE2.vulmax). Typical value = 0.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than UnderexcLimIEEE2.vulmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:UnderexcLimIEEE2.vulmax

dy302c:UnderexcLimX1

Severity: sh:Violation

Targets:

• targetClass: cim:UnderexcLimX1

Nested Properties:

dy302c:UnderexcLimX1.k-valueRange

Path: cim:UnderexcLimX1.k
Minimum excitation limit slope (K) (> 0).

Severity: sh:Violation

Messages:

• "The value is negative or zero."

Constraints:

• sh:MinExclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimX1.tf2-valueRange

Path: cim:UnderexcLimX1.tf2
Differential time constant (T_F2) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimX1.tm-valueRange

Path: cim:UnderexcLimX1.tm
Minimum excitation limit time constant (T_M) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimX2

Severity: sh:Violation

Targets:

• targetClass: cim:UnderexcLimX2

Nested Properties:

dy302c:UnderexcLimX2.tf2-valueRange

Path: cim:UnderexcLimX2.tf2
Differential time constant (T_F2) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:UnderexcLimX2.tm-valueRange

Path: cim:UnderexcLimX2.tm
Minimum excitation limit time constant (T_M) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:VAdjIEEE

Severity: sh:Violation

Targets:

• targetClass: cim:VAdjIEEE

Nested Properties:

dy302c:VAdjIEEE.taoff-valueRange

Path: cim:VAdjIEEE.taoff
Time that adjuster pulses are off (T_AOFF) (>= 0). Typical value = 0,5.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:VAdjIEEE.taon-valueRange

Path: cim:VAdjIEEE.taon
Time that adjuster pulses are on (T_AON) (>= 0). Typical value = 0,1.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:VAdjIEEE.vadjmin-valueRangePair

Path: cim:VAdjIEEE.vadjmin
Minimum output of the adjuster (V_ADJMIN) (< VAdjIEEE.vadjmax). Typical value = 0,9.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than VAdjIEEE.vadjmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:VAdjIEEE.vadjmax

dy302c:VCompIEEEType1

Severity: sh:Violation

Targets:

• targetClass: cim:VCompIEEEType1

Nested Properties:

dy302c:VCompIEEEType1.rc-valueRange

Path: cim:VCompIEEEType1.rc
<font color="#0f0f0f">Resistive component of compensation of a generator (Rc) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:VCompIEEEType1.tr-valueRange

Path: cim:VCompIEEEType1.tr
<font color="#0f0f0f">Time constant which is used for the combined voltage sensing and compensation signal (Tr) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:VCompIEEEType1.xc-valueRange

Path: cim:VCompIEEEType1.xc
<font color="#0f0f0f">Reactive component of compensation of a generator (Xc) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:VCompIEEEType2

Severity: sh:Violation

Targets:

• targetClass: cim:VCompIEEEType2

Nested Properties:

dy302c:VCompIEEEType2.tr-valueRange

Path: cim:VCompIEEEType2.tr
<font color="#0f0f0f">Time constant which is used for the combined voltage sensing and compensation signal (Tr) (>= 0).

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType3IEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContPType3IEC

Nested Properties:

dy302c:WindContPType3IEC.tdvs-valueRange

Path: cim:WindContPType3IEC.tdvs
Time delay after deep voltage sags (T_DVS) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType3IEC.tomegafiltp3-valueRange

Path: cim:WindContPType3IEC.tomegafiltp3
Filter time constant for generator speed measurement (T_omegafiltp3) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType3IEC.tomegaref-valueRange

Path: cim:WindContPType3IEC.tomegaref
Time constant in speed reference filter (T_omega,ref) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType3IEC.tpfiltp3-valueRange

Path: cim:WindContPType3IEC.tpfiltp3
Filter time constant for power measurement (T_pfiltp3) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType3IEC.tufiltp3-valueRange

Path: cim:WindContPType3IEC.tufiltp3
Filter time constant for voltage measurement (T_ufiltp3) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType4aIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContPType4aIEC

Nested Properties:

dy302c:WindContPType4aIEC.tpordp4a-valueRange

Path: cim:WindContPType4aIEC.tpordp4a
Time constant in power order lag (T_pordp4A) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType4aIEC.tufiltp4a-valueRange

Path: cim:WindContPType4aIEC.tufiltp4a
Voltage measurement filter time constant (T_ufiltp4A) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType4bIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContPType4bIEC

Nested Properties:

dy302c:WindContPType4bIEC.tpaero-valueRange

Path: cim:WindContPType4bIEC.tpaero
Time constant in aerodynamic power response (T_paero) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType4bIEC.tpordp4b-valueRange

Path: cim:WindContPType4bIEC.tpordp4b
Time constant in power order lag (T_pordp4B) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPType4bIEC.tufiltp4b-valueRange

Path: cim:WindContPType4bIEC.tufiltp4b
Voltage measurement filter time constant (T_ufiltp4B) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContPitchAngleIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContPitchAngleIEC

Nested Properties:

dy302c:WindContPitchAngleIEC.dthetamin-valueRangePair

Path: cim:WindContPitchAngleIEC.dthetamin
Maximum pitch negative ramp rate (dtheta_min) (< WindContPitchAngleIEC.dthetamax). It is a type-dependent parameter. Unit = degrees / s.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindContPitchAngleIEC.dthetamax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindContPitchAngleIEC.dthetamax

dy302c:WindContPitchAngleIEC.thetamin-valueRangePair

Path: cim:WindContPitchAngleIEC.thetamin
Minimum pitch angle (theta_min) (< WindContPitchAngleIEC.thetamax). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindContPitchAngleIEC.thetamax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindContPitchAngleIEC.thetamax

dy302c:WindContPitchAngleIEC.ttheta-valueRange

Path: cim:WindContPitchAngleIEC.ttheta
Pitch time constant (ttheta) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContQIEC

Nested Properties:

dy302c:WindContQIEC.iqmin-valueRangePair

Path: cim:WindContQIEC.iqmin
Minimum reactive current injection (i_qmin) (< WindContQIEC.iqmax). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindContQIEC.iqmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindContQIEC.iqmax

dy302c:WindContQIEC.rdroop-valueRange

Path: cim:WindContQIEC.rdroop
Resistive component of voltage drop impedance (r_droop) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQIEC.tpfiltq-valueRange

Path: cim:WindContQIEC.tpfiltq
Power measurement filter time constant (T_pfiltq) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQIEC.tpost-valueRange

Path: cim:WindContQIEC.tpost
Length of time period where post fault reactive power is injected (T_post) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQIEC.tqord-valueRange

Path: cim:WindContQIEC.tqord
Time constant in reactive power order lag (T_qord) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQIEC.tufiltq-valueRange

Path: cim:WindContQIEC.tufiltq
Voltage measurement filter time constant (T_ufiltq) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQIEC.umin-valueRangePair

Path: cim:WindContQIEC.umin
Minimum voltage in voltage PI controller integral term (u_min) (< WindContQIEC.umax). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindContQIEC.umax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindContQIEC.umax

dy302c:WindContQIEC.xdroop-valueRange

Path: cim:WindContQIEC.xdroop
Inductive component of voltage drop impedance (x_droop) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQLimIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContQLimIEC

Nested Properties:

dy302c:WindContQLimIEC.qmin-valueRangePair

Path: cim:WindContQLimIEC.qmin
Minimum reactive power (q_min) (< WindContQLimIEC.qmax). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindContQLimIEC.qmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindContQLimIEC.qmax

dy302c:WindContQPQULimIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContQPQULimIEC

Nested Properties:

dy302c:WindContQPQULimIEC.tpfiltql-valueRange

Path: cim:WindContQPQULimIEC.tpfiltql
Power measurement filter time constant for Q capacity (T_pfiltql) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContQPQULimIEC.tufiltql-valueRange

Path: cim:WindContQPQULimIEC.tufiltql
Voltage measurement filter time constant for Q capacity (T_ufiltql) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContRotorRIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindContRotorRIEC

Nested Properties:

dy302c:WindContRotorRIEC.rmin-valueRangePair

Path: cim:WindContRotorRIEC.rmin
Minimum rotor resistance (r_min) (< WindContRotorRIEC.rmax). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindContRotorRIEC.rmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindContRotorRIEC.rmax

dy302c:WindContRotorRIEC.tomegafiltrr-valueRange

Path: cim:WindContRotorRIEC.tomegafiltrr
Filter time constant for generator speed measurement (T_omegafiltrr) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindContRotorRIEC.tpfiltrr-valueRange

Path: cim:WindContRotorRIEC.tpfiltrr
Filter time constant for power measurement (T_pfiltrr) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindGenType3aIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindGenType3aIEC

Nested Properties:

dy302c:WindGenType3aIEC.tic-valueRange

Path: cim:WindGenType3aIEC.tic
Current PI controller integration time constant (T_Ic) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindGenType3bIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindGenType3bIEC

Nested Properties:

dy302c:WindGenType3bIEC.tg-valueRange

Path: cim:WindGenType3bIEC.tg
Current generation time constant (T_g) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindGenType3bIEC.two-valueRange

Path: cim:WindGenType3bIEC.two
Time constant for crowbar washout filter (T_wo) (>= 0). It is a case-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindGenType4IEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindGenType4IEC

Nested Properties:

dy302c:WindGenType4IEC.tg-valueRange

Path: cim:WindGenType4IEC.tg
Time constant (T_g) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindMechIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindMechIEC

Nested Properties:

dy302c:WindMechIEC.hgen-valueRange

Path: cim:WindMechIEC.hgen
Inertia constant of generator (H_gen) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindMechIEC.hwtr-valueRange

Path: cim:WindMechIEC.hwtr
Inertia constant of wind turbine rotor (H_WTR) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPitchContPowerIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindPitchContPowerIEC

Nested Properties:

dy302c:WindPitchContPowerIEC.dpmin-valueRangePair

Path: cim:WindPitchContPowerIEC.dpmin
Rate limit for decreasing power (dp_min) (< WindPitchContPowerIEC.dpmax). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPitchContPowerIEC.dpmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPitchContPowerIEC.dpmax

dy302c:WindPitchContPowerIEC.t1-valueRange

Path: cim:WindPitchContPowerIEC.t1
Lag time constant (T₁) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPitchContPowerIEC.tr-valueRange

Path: cim:WindPitchContPowerIEC.tr
Voltage measurement time constant (T_r) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantFreqPcontrolIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindPlantFreqPcontrolIEC

Nested Properties:

dy302c:WindPlantFreqPcontrolIEC.dprefmin-valueRangePair

Path: cim:WindPlantFreqPcontrolIEC.dprefmin
Minimum (negative) ramp rate of p_WTref request from the plant controller to the wind turbines (dp_refmin) (< WindPlantFreqPcontrolIEC.dprefmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantFreqPcontrolIEC.dprefmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantFreqPcontrolIEC.dprefmax

dy302c:WindPlantFreqPcontrolIEC.dpwprefmin-valueRangePair

Path: cim:WindPlantFreqPcontrolIEC.dpwprefmin
Maximum negative ramp rate for wind plant power reference (dp_WPrefmin) (< WindPlantFreqPcontrolIEC.dpwprefmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantFreqPcontrolIEC.dpwprefmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantFreqPcontrolIEC.dpwprefmax

dy302c:WindPlantFreqPcontrolIEC.kiwppmin-valueRangePair

Path: cim:WindPlantFreqPcontrolIEC.kiwppmin
Minimum PI integrator term (K_IWPpmin) (< WindPlantFreqPcontrolIEC.kiwppmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantFreqPcontrolIEC.kiwppmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantFreqPcontrolIEC.kiwppmax

dy302c:WindPlantFreqPcontrolIEC.prefmin-valueRangePair

Path: cim:WindPlantFreqPcontrolIEC.prefmin
Minimum p_WTref request from the plant controller to the wind turbines (p_refmin) (< WindPlantFreqPcontrolIEC.prefmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantFreqPcontrolIEC.prefmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantFreqPcontrolIEC.prefmax

dy302c:WindPlantFreqPcontrolIEC.tpft-valueRange

Path: cim:WindPlantFreqPcontrolIEC.tpft
Lead time constant in reference value transfer function (T_pft) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantFreqPcontrolIEC.tpfv-valueRange

Path: cim:WindPlantFreqPcontrolIEC.tpfv
Lag time constant in reference value transfer function (T_pfv) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantFreqPcontrolIEC.twpffiltp-valueRange

Path: cim:WindPlantFreqPcontrolIEC.twpffiltp
Filter time constant for frequency measurement (T_WPffiltp) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantFreqPcontrolIEC.twppfiltp-valueRange

Path: cim:WindPlantFreqPcontrolIEC.twppfiltp
Filter time constant for active power measurement (T_WPpfiltp) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindPlantReactiveControlIEC

Nested Properties:

dy302c:WindPlantReactiveControlIEC.dxrefmin-valueRangePair

Path: cim:WindPlantReactiveControlIEC.dxrefmin
Maximum negative ramp rate for wind turbine reactive power/voltage reference (dx_refmin) (< WindPlantReactiveControlIEC.dxrefmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantReactiveControlIEC.dxrefmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantReactiveControlIEC.dxrefmax

dy302c:WindPlantReactiveControlIEC.kiwpxmin-valueRangePair

Path: cim:WindPlantReactiveControlIEC.kiwpxmin
Minimum reactive power/voltage reference from integration (K_IWPxmin) (< WindPlantReactiveControlIEC.kiwpxmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantReactiveControlIEC.kiwpxmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantReactiveControlIEC.kiwpxmax

dy302c:WindPlantReactiveControlIEC.tuqfilt-valueRange

Path: cim:WindPlantReactiveControlIEC.tuqfilt
Filter time constant for voltage-dependent reactive power (T_uqfilt) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC.twppfiltq-valueRange

Path: cim:WindPlantReactiveControlIEC.twppfiltq
Filter time constant for active power measurement (T_WPpfiltq) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC.twpqfiltq-valueRange

Path: cim:WindPlantReactiveControlIEC.twpqfiltq
Filter time constant for reactive power measurement (T_WPqfiltq) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC.twpufiltq-valueRange

Path: cim:WindPlantReactiveControlIEC.twpufiltq
Filter time constant for voltage measurement (T_WPufiltq) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC.txft-valueRange

Path: cim:WindPlantReactiveControlIEC.txft
Lead time constant in reference value transfer function (T_xft) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC.txfv-valueRange

Path: cim:WindPlantReactiveControlIEC.txfv
Lag time constant in reference value transfer function (T_xfv) (>= 0). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindPlantReactiveControlIEC.xrefmin-valueRangePair

Path: cim:WindPlantReactiveControlIEC.xrefmin
Minimum x_WTref (q_WTref or delta u_WTref) request from the plant controller (x_refmin) (< WindPlantReactiveControlIEC.xrefmax). It is a project-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is either equal to or greater than WindPlantReactiveControlIEC.xrefmax."

Constraints:

• sh:LessThanConstraintComponent (Severity: sh:Violation)
  • Path: cim:WindPlantReactiveControlIEC.xrefmax

dy302c:WindProtectionIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindProtectionIEC

Nested Properties:

dy302c:WindProtectionIEC.tfma-valueRange

Path: cim:WindProtectionIEC.tfma
Time interval of moving average window (TfMA) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0

dy302c:WindRefFrameRotIEC

Severity: sh:Violation

Targets:

• targetClass: cim:WindRefFrameRotIEC

Nested Properties:

dy302c:WindRefFrameRotIEC.tpll-valueRange

Path: cim:WindRefFrameRotIEC.tpll
Time constant for PLL first order filter model (T_PLL) (>= 0). It is a type-dependent parameter.

Severity: sh:Violation

Messages:

• "The value is negative."

Constraints:

• sh:MinInclusiveConstraintComponent (Severity: sh:Violation)
  • Value: 0.0